Used Edge Bander Batch 1 for sale (81,164)

Condition: new, Siemens C98043-A1210-L20 Simoreg board with accessory set C98043-A1210-D2-1 < unused > in opened original packaging, 100% functional Chsdpfx Abszu Etce Dsb

Condition: new, SKF S71928 ACD / DBAVQ6485 Angular contact ball bearing set (set = 1 pair), unused in original packaging, 100% functional, scope of delivery as per photos Chodpfx Abszu E Rus Dsb

Condition: ready for operation (used), SMW Autoblok SRG 1 C grinding steady rest ID 225020 SN 1582110103 ,used, good condition, 100% working, scope of delivery as per photos Chedszu E S Sopfx Ab Dsb

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 Cjdpfxezu Nvzs Ab Dehb - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 2009, Edge banding machine with workpiece return system Chjdpezuyhusfx Ab Dsb Manufacturer: HOMAG Type: PROFI KAR310/11/A20/S2 Year of manufacture: 2009 Technical data Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Codpfx Aszuyh Iob Dshb Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Cedpfxezuykce Ab Dohb Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, Chjdpfx Aozuykvob Dsb by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling Chjdpezuyk Nofx Ab Djb - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Cedpfxozuypxj Ab Dshb Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Cedpfozuyp Ejx Ab Dshb Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit Cjdjzuyqijpfx Ab Djhb - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Codjzuzlbspfx Ab Dohb Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Csdpfx Abezuzqdo Dohb Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00629, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2017.03. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Codpfozu Tzujx Ab Dehb Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2017.03 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Chsdpfx Abozugnuo Deb Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: used, mileage: 67,200 km, first registration: 06/2009, fuel type: diesel, tire size: 16.00 R 25, axle configuration: 6x6, fuel: diesel, Year of construction: 2009, Equipment: ABS, air conditioning, crane, = Additional Options and Accessories = - 6x6 - PTO Csdpfx Abszvcz To Dshb = Further Information = Tire size: 16.00 R 25 Front axle: Steered; Tire tread depth left: 55%; Tire tread depth right: 55% Rear axle 1: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 2: Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Unladen weight: 36,000 kg GVWR: 36,000 kg Lifting capacity: 50,000 kg Crane: Year of manufacture 2009 Damage: None

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 180 kg, can be inspected on-site while powered. Codpezvfh Nofx Ab Djhb

Condition: used, Siemens SIMATIC S7-1500 CPU 1510SP-1 PN 6ES7510-1SJ01-0AB0 Manufacturer: Siemens Product series: SIMATIC S7-1500 / ET 200SP Cjdpfx Aezxrg Djb Dshb Type: CPU 1510SP-1 PN Article number: 6ES7510-1SJ01-0AB0 Device type: PLC / CPU Program memory: 150 kB Data memory: 750 kB Interface: PROFINET IRT with 3-port switch Performance: 72 ns bit operation Supply voltage: 24 V DC SIMATIC memory card required: Yes

Condition: used, mileage: 114,000 km, power: 96 kW (130.52 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,200 mm, loading space width: 2,000 mm, loading space height: 34 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), CITROEN Jumper 35 L2 | 1st Owner | Air Conditioning | Tipper VEHICLE HISTORY * GERMAN VEHICLE * 1ST OWNER * VERY WELL-MAINTAINED VEHICLE / VIDEO AVAILABLE UPON REQUEST * NO LETTERING * IMMEDIATELY READY FOR USE * OVER €9,400 INVESTED IN MAINTENANCE AND REPAIRS * INVOICES AVAILABLE UNTIL 2025 * Replacement manual gearbox renewed * Clutch renewed * Gear oil renewed * Front brakes completely renewed * NOx sensor renewed * Left drive shaft (joint set) renewed * Both front lateral arms renewed * AdBlue tank renewed * Both rear buffer stops renewed * Cooling system checked and coolant reservoir cap renewed * Fuel filter renewed * 2 tires renewed * New MOT/emission test * Regular maintenance and diagnostics performed VEHICLE EQUIPMENT * ALUMINUM SIDE PANELS * GRUAU BODY AND TIPPER * AIR CONDITIONING * TOW HITCH * CRUISE CONTROL * MULTIFUNCTION STEERING WHEEL * ONBOARD COMPUTER * RADIO * ELECTRIC WINDOWS * ELECTRICALLY ADJUSTABLE EXTERIOR MIRRORS * CENTRAL LOCKING * POWER STEERING Chodpfx Abezx Ir No Djb * ABS * ESP * ASR * DRIVER AIRBAG * PASSENGER AIRBAG * DAYTIME RUNNING LIGHTS * LASHING POINTS FURTHER INFORMATION: VIDEOS AND DETAILED PHOTOS AVAILABLE UPON REQUEST VIA WHATSAPP. INSPECTION POSSIBLE ONLY AFTER PRIOR APPOINTMENT. VEHICLE AVAILABLE IMMEDIATELY. TRADE-IN POSSIBLE. FINANCING POSSIBLE. INVOICES FOR THE PERFORMED MAINTENANCE AND REPAIR WORK ARE AVAILABLE. EXPORT / NOTES EXPORT SALES ONLY WITH A DEPOSIT OF €500 TO €2,000. EXPORT LICENSE PLATES, CUSTOMS CLEARANCE, AND SHORT-TERM LICENSE PLATES ARE POSSIBLE (APPROVED EXPORTER). ALL INFORMATION WITHOUT GUARANTEE. ERRORS, INPUT ERRORS AND PRIOR SALE RESERVED.

Condition: used, mileage: 50,000 km, power: 125 kW (169.95 HP), first registration: 08/2023, fuel type: diesel, color: white, gearing type: automatic, number of seats: 20, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, For sale is a well-maintained Mercedes-Benz Sprinter 517 Transfer 45 LL with a 2.0-liter diesel engine. * The vehicle is in good condition! * New inspection and emissions test, valid until 08/2027, without any defects. * German vehicle * Euro 6E * First owner * Any damage will be repaired before sale. Csdpfxezq Tvwj Ab Djhb * Regularly maintained * VAT can be shown separately. Equipment: * Tremonia equipment * 19 + 1 seats * Electric door on the front right side * Automatic transmission * LED headlights * Automatic climate control (front and rear) * Roof-mounted air conditioning * Auxiliary heater * Roof fan (skylight) * MBUX * Cruise control * Electric windows * Electrically folding exterior mirrors * Central locking * and more... Technical data: Permissible total weight: 5000 KG Overall length: 7367 mm Overall width: 2020 mm Height: 2900 mm Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer registration (5-day/customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and smart repair. All of our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other services that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on

Condition: used, mileage: 50,000 km, power: 125 kW (169.95 HP), first registration: 08/2023, fuel type: diesel, color: white, gearing type: automatic, number of seats: 19, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, For sale is a well-maintained Mercedes-Benz Sprinter 517 Transfer 45 LL with a 2.0-liter diesel engine. * The vehicle is in good condition! * New inspection and emissions test, valid until 08/2027, without any defects. * German vehicle * Euro 6E * First owner * Any damage will be repaired before sale. * Regularly maintained * VAT can be shown separately. Equipment: * Tremonia equipment * 19 + 1 seats * Electric door on the front right side * Automatic transmission * LED headlights * Automatic climate control (front and rear) * Roof-mounted air conditioning * Auxiliary heater * Roof fan (skylight) * MBUX * Cruise control * Electric windows * Electrically folding exterior mirrors * Central locking * and more... Technical data: Permissible total weight: 5000 KG Overall length: 7367 mm Cjdjzq Tv Depfx Ab Dohb Overall width: 2020 mm Height: 2900 mm Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer registration (5-day/customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and smart repair. All of our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other services that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on

Condition: excellent (used), CATALOG NUMBER 7099 TECHNICAL DATA - Engine power: 132 kW - Shaft diameter: 65 mm - Shipping dimensions (L/W/H): 120x80x700 mm Codpfszx Scrox Ab Dshb - Engine dimensions (L/W/H): 550x1050x700 mm - Weight: 630 kg ADVANTAGES – Used engine – Very good condition Net price: 10,900 PLN Net price: 2,590 EUR (based on an exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Year of construction: 2018, condition: excellent (used), Kiremko batch fryer (KCLIG020) x 2 available (YOM 2018/2012) 2 x Kiremko batch fryers, previously used for potato crisps 20kg per hour each line. (40kg per hour total) Both Kiremko fryer lines come with a slicer. One slicer Fam and the other Urschel. In excellent condition, fully working. Both lines come with extractors and fire suppression kit. Codpoznv Tyefx Ab Djhb

Condition: excellent (used), power: 109 kW (148.20 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2012, Year of construction: 2012, operating hours: 12,915 h, Equipment: air conditioning, = Additional options and accessories = - Day Cabin - Radio = Remarks = Condition CE type: CE = More information = General information Cab: day Technical information Number of cylinders: 4 Engine capacity: 4.460 cc Track width: 2.380 cm Engine type: KOMATSU SAA4D107E-1A Empty weight: 21.200 kg Dimensions (LxBxH): 9430 x 2980 x 3040 cm Functional Csdozw Dy Tspfx Ab Dshb Number of valves: 2 Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good