Used Electromagnet for sale (350)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t equipped with Rockstroh Drain Jet 100-2 high-pressure flushing unit Internal Number: #558 Dkjdpfx Ajxc Syroggot Rockstroh Drain Jet 100-2 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF32 * Approx. 120 liters / minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED roof-mounted warning lights * Various storage options * Watertight, non-slip plastic floor covering * Standard cleaning nozzle set Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, trailer socket 13-pin, battery disconnecting switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, suspension: stability level III, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), ambient lighting in passenger/cargo compartment, charging package dashboard (USB sockets and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, fog lights with cornering function, auxiliary drive 2B with reduction gear, parameterizable special module, crossmember for trailer coupling, crossmember with integrated step, sliding door cargo/passenger compartment left, mud flaps rear, seats in the driver's cab: driver's seat comfort, fuel level sensor for auxiliary heater, separating relay for battery additionally, front axle reinforced, preparation for transmission oil cooler, preparation for cargo compartment partition, winter package, sliding door assist left, sliding door assist right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, automatic activation of driving lights, entry handle on rear pillar rear right, entry handle for sliding door on cargo compartment partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: driving information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: intelligent speed assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: box high

Condition: new, functionality: fully functional, Basic Drive Specifications (ACS800-DEMAG 04M-0170-3) Product Series: ACS800 (ABB Industrial Low-Voltage Drive) Application Software: DEMAG (Loaded with Demag's proprietary crane control program rather than standard ABB firmware). Construction Type: 04M (Drive module designed for cabinet installation with specialized mechanical configurations). Rating/Size: 0170 (Nominal current rating indicator; fits an R7 frame size).Normal Output Power: 132 kW Continuous Max Current: 248 A Heavy-Duty Power (Cranes): 110 kW (with 202 A continuous output) Voltage Rating: 3 (Three-phase input supply voltage of 380 V to 415 V AC). Hardware & Software Option Codes (+D150+E210+H355+H362+J400+L501+L502) The plus-codes define the factory-installed modifications and optional expansion modules: Code Component / Feature Description +D150 Brake Chopper Built-in dynamic braking control module. Essential for hoisting to safely dissipate energy generated during load lowering. +E210 EMC Filter Low electromagnetic emission filter conforming to standard European industrial standards (Category C3/Class A). +H355 Control Cabling Entry Specifies a specific bottom or standard orientation configuration for thick power/motor cables. +H362 Coated Circuit Boards Provides an extra layer of protective chemical coating on internal PCBs to prevent corrosion from dust, humidity, or aggressive industrial environments. +J400 Control Panel (CDP312R) Removable digital control panel with alphanumeric display mounted on the unit or cabinet door for programming and metrics tracking. +L501RDIO-01 Digital I/O First digital I/O extension module, giving extra programmable inputs/outputs for crane safety limits or interlocking. +L502RAIO-01 Analog I/O Analog I/O extension module, allowing precise master/joystick references or load cell signal reading. Dkedpfx Ajy Udtkoggst Brand new never used. Please check out our other listings as well.

Condition: used, Industrial Bowl Feeder and Linear Feeder, Lysta Vibrator, Used machine Manufacturer: Lysta Vibrator (Albertslund, Denmark) Type (Vibratory Bowl Feeder): D 600/750 (Serial number: 1874) Type (Linear Vibratory Feeder): 400 x 75 (Serial number: 472) Condition: Used, industrial execution Dsdpfozwdzdex Aggekt Overall dimensions: 710 x 1360 x 1450 mm Technical and operating parameters: Bowl diameter: 450 – 750 mm Linear track size: 200 x 700 mm Electrical data (Bowl Feeder): 220 V / 230 V, 1 phase, 50 Hz, 3.5 A Electrical data (Linear Feeder): 220 V / 230 V, 1 phase, 50 Hz, 0.3 A Design / Operation: Electromagnetic orientation and feeding system with rotary bowl drive and linear transfer track. Suitable Application Areas: This high-precision Danish vibratory feeding system is perfectly designed for automated sorting, orientation, and feeding of small components: Assembly lines and automated cells: Feeding fasteners (screws, nuts, washers), plastic parts, or electronic components in correct orientation to assembly machines or robotic workstations. Packaging systems: Controlled, continuous, or counted feeding of small products into packaging machines. Plastics and metal processing: Orienting and singulating bulk mass components for machining, inspection, or sorting stations.

Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces. Key Features Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping. Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation. Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy. Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times. Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life. 103 mm spindle bore allows machining of long and large-diameter workpieces. 3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy. Construction and Technology The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity. The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity. Machining Capabilities The machine is capable of performing a wide range of machining operations, including: Rough and finish turning Metric, imperial, module, and DP thread cutting Drilling and boring Taper turning Facing operations With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish. Technical Specifications Distance Between Centres 2,000 mm Centre Height 280 mm Swing Over Bed 560 mm Swing Over Gap 785 mm Swing Over Cross Slide 355 mm Bed Width 350 mm Spindle Bore 103 mm Spindle Nose Camlock D1-8 Spindle Speeds 12 speeds, 25–1,600 rpm Maximum Tool Size 25 × 25 mm Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev Cross Feed Range 35 feeds, 0.020–0.573 mm/rev Metric Thread Range 47 pitches, 0.2–14 mm Imperial Thread Range 60 pitches, 2–112 TPI Module Thread Range 39 pitches, 0.1–7 Module Diametral Pitch Thread Range 50 pitches, 4–112 DP Tailstock Quill Diameter 75 mm Tailstock Quill Travel 180 mm Tailstock Taper MT5 Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP) Coolant Pump Motor 0.1 kW Machine Dimensions 3340 × 1150 × 1460 mm Weight 2,940 kg Standard Equipment 315 mm 3-jaw self-centering chuck (PO3-315 / D8) 350 mm 4-jaw independent chuck (K72-350 / D8) Service tool kit 450 mm faceplate Fixed steady rest (capacity up to Ø180 mm) Travelling steady rest (capacity up to Ø120 mm) Two dead centres CE-compliant electromagnetic foot brake Electromechanical spindle brake Filled with Shell Tellus 46 hydraulic oil Rapid traverse system Coolant system Halogen work light Change gears Dksdjzqzxmspfx Aggot Chip tray 3-axis Digital Readout (DRO)

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 50 mm, spindle mount: MK 4, actuation type: electric, rotational speed (max.): 2,200 rpm, rotational speed (min.): 55 rpm, table width: 800 mm, table length: 260 mm, overall weight: 800 kg, Equipment: CE marking, rotational speed infinitely variable, The GB 55 SK NC VARIO drill press is equipped as standard with a large cross table and a 2-axis digital readout, allowing not only drilling but also precise milling operations. The automatic spindle feed and tapping function significantly enhance the capabilities of the machine. Stepless spindle speed adjustment is available within the range of 55–2200 rpm. Thanks to its robust construction and large drilling capacity, this model is well-suited for series or industrial production. The NC version features a programmable controller for setting, among other things, drilling depth, spindle speed, and automated tapping. Drilling capacity is 50 mm, tapping up to M42. Key features: - NC version with programmable controller for setting drilling depth, spindle speed, and automatic tapping, etc. - 6-range automatic spindle feed, adjustable electromagnetically including tapping function - Rigid machine construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for high machining accuracy - Heavy-duty base plate with T-slots and integrated coolant system - Comprehensive standard equipment - Quiet machine operation thanks to hardened and ground gears - Safety covers meet latest CE standards - Automatic tool ejector - Quick tool change enabled by the automatic ejector - Electronic indicators for drilling depth and spindle speed as standard - Stepless speed adjustment Technical Specifications: - Maximum drilling capacity: 50 mm - Drilling capacity in castings: 60 mm - Maximum tapping capacity: M42 - Drill chuck capacity: 1–13 mm / B16 - Spindle taper: MK 4 Dedpfeytfuxjx Aggekt - Spindle speed min.: 55 rpm - Spindle speed max.: 2200 rpm - Speed change: stepless (55–348/348–2200) - Drive transmission: gear - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Drilling table tilt: -45° to +45° - Max. distance spindle/column: 380 mm - Max. distance spindle/table: 480 mm - Max. distance spindle/base: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (width): 800 mm - Table size (depth): 280 mm - Cross table travel (X x Y): 415 x 290 mm - T-slots (number, size): 14 mm - Motor power S1 100%: 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1–13 mm / B16 - MK4 / B16 arbor - Reducing sleeves MK4/3, MK4/2, MK3/1 - Coolant system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable guard - Electronic indicators for drilling depth and spindle speed - Stepless spindle speed adjustment

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Dksdpfx Asxuwansggst Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3286502, overall weight: 5 kg, input voltage: 230 V, The DGYF 500C induction sealer is used for induction-electromagnetic sealing of aluminum caps under bottle caps. Key features: • Suitable for use with plastic or glass containers. • Very easy to operate. • Handheld device for small-scale applications. • Easy to transport; requires no dedicated workspace. • Packing speed of approximately 20-40 units/minute (depending on the operator and the product being sealed). • Maximum container diameter: 60-130 mm. Dedpfx Aey S Rxhsggekt • Maximum distance between the inductor and the container: 3 mm. • Activated by a switch on top of the inductor. Control panel: • On/Off switch. • Fuse. • Digital display indicating current intensity. • Digital display indicating time. • Overheat protection – the device automatically shuts down until it cools down. The induction sealer comes with sealing foil, 85 mm in diameter, 2 packs of approximately 400 pieces each.

Year of construction: 2017, condition: excellent (used), System Description Steel base plates serve as the foundation of the system and for positioning the lifting systems and shakers. Electric or electro-hydraulic lifting system for vehicle positioning. 2 high-power shakers with electromagnetic locking and docking system, up to 3.5 tons. Control cabinet with shaker control. PC system for control and data analysis. Includes component test bench! Dsdpfx Agoifkhasgjkt

Condition: as good as new (ex-display), Demonstration machine Professional wood thickness planer with Dedpfx Asvrvv Hjggekt 4 knife shaft, articulated pressure beam, planed machine cast table, extremely stable, electromagnetic motor brake, star-delta circuit. CE tested Technical data: Planing width 630 mm Passage height 240 mm Planing knives 4 pieces Shaft diameter 120 mm Feed speed 5 and 10 m/min Motor output at 100% ED 5.5 Kw, 400V Weight: 790Kg Optional special equipment: Grooved articulated feed roller 2 height-adjustable under-table rollers Electric table lift Mech. digital display to tenths of a mm Spiral milling roller Tersa shaft Symbol photo Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Dkjdsymdtyjpfx Agget Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Dkjdpfx Agoymduqsgst Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W • Working light: LED lamp • Leveling feet ✔

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 417 CDI, downgraded to 3.5t, with Leistikow B55C high-pressure cleaning system Internal Number: #526 Leistikow B 55 C * Auxiliary drive from the Sprinter * High-pressure pump AQUABAR KF30 * Approx. 106 liters / minute at 200 bar (40KW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 120m DN16 * Filling hose reel with approx. 60m DN20 * Approx. 1,000 liter water tank * Water shortage protection Dksdsyxkbcepfx Agget * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED revolving beacon lights * Various storage options * Adjustable heavy-duty shelf * Standard cleaning nozzle equipment Special equipment: 2nd battery (auxiliary battery) in engine compartment, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, suspension: stabilization level II, parking brake electric, all-weather floor mats, vehicle without tie-down points, gearbox lock for auxiliary drive, cup holder in front, grab handles on A-pillars, additional master key, rear door (opening angle 270 degrees), folding cover for storage compartment, connection strip for electrical connections (driver's seat box), comfort lighting in passenger / cargo area, charging package dashboard (USB sockets and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, configurable special module, cross member for trailer coupling, cross member with integrated step, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay for battery additionally, front axle reinforced, preparation for gearbox oil cooling, permissible gross weight 3.88 t, assist handle sliding door right Further equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: wiring for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), roof light in cargo area with door contact, automatic activation for headlights, entry handle on rear pillar on the right, entry handle for sliding door on cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: driving information assistant, driving assistance system: attention assist (fatigue detection sensor), driving assistance system: intelligent speed assist, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body / superstructure: standard van, instrument cluster with color display, communication module (LTE) for digital services, fuel tank: main tank 93 liters, cargo area partition, steering wheel with multifunction, truck registration, marking lights on the side, Mercedes

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dksdpfjymdwfox Aggst Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Djdoymahyspfx Aggjkt Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Dkjdszlgc Hopfx Aggst Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop.

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications Distance between centers: 2000 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm Weight approx.: 1995 kg Features • Modern main spindle bearing assembly with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, ergonomic control for feeds and threads via lead and feed shaft • Large, hardened, and precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse (longitudinal and cross) as standard for reduced non-productive time • Machine bed cast in one piece, extremely torsion-resistant and low-vibration for high precision turning Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with electromagnetic brake according to CE • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears Dedpfx Asxl Dzasggjkt • 2 centers • Reducing sleeve • Thread-chasing dial • LED machine lamp • Chip guard at rear • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds Dkedexl Dwuopfx Agget • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: new, Year of construction: 2026, turning diameter over cross slide: 280 mm, spindle bore: 105 mm, turning diameter: 840 mm, total length: 1,520 mm, total width: 4,500 mm, total height: 1,650 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 36 rpm, type of input current: three-phase, overall weight: 4,050 kg, The Bernardo Goliath 800 x 3000 professional metal lathe is a powerful industrial tool engineered for precise machining of large-scale components in both single-unit and series production. Equipped with a 3-axis digital readout and rapid longitudinal and cross feeds, this machine significantly reduces downtime while ensuring maximum working accuracy. Its impressive distance between centres of 3000 mm and large spindle bore (105 mm) enable it to handle even the most demanding mechanical engineering tasks with ease. The robust, induction-hardened bed made of cast iron guarantees exceptional stability and minimised vibrations, even during heavy-duty operation. This is the ideal solution for workshops seeking reliability, versatility, and high-performance cutting in the heavy-duty class. Key Features: - Solid bed constructed from precision-ground and induction-hardened cast iron for outstanding accuracy - State-of-the-art main spindle assembly with high-quality angular contact ball bearings - Centrally positioned, user-friendly feed and threading control elements - Standard with rapid longitudinal and cross feed to reduce downtime - Large, additionally hardened and polished gears ensure quiet and smooth operation - Removable gap bridge allows machining of larger workpieces - Tailstock can be offset for taper turning, handwheel features adjustable scale (0.02 mm) - Electromechanical foot brake minimises downtime Dodpfx Agjyr Naijgjkt - High performance even in face turning operations - 3-axis digital display and MULTIFIX size D toolpost system included in delivery - Capable of cutting trapezoidal and module threads! Technical Specifications: Distance between centres: 3000 mm Centre height: 420 mm Swing over bed: 840 mm Swing with gap bridge removed: 1060 mm Swing over cross slide: 280 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 36–1600 rpm Number of spindle speeds: 16 Longitudinal feed range: 0.063 – 2.52 mm/rev Cross feed range: 0.027 – 1.07 mm/rev Metric threads: (18) 0.5 – 7 mm Inch threads: (26) 2–28 TPI Quill diameter: 75 mm Quill stroke: 150 mm Tailstock taper: MK 5 Motor power: 9.0 kW Voltage: 400 V Dimensions (W x D x H): 4500 x 1520 x 1650 mm Weight approx.: 4050 kg Scope of Delivery: - 3-jaw chuck PS3-315mm /D8 - 630 mm face plate - 260 mm fixed steady rest - 110 mm travelling steady rest - Reducing sleeve - Centres (1x fixed / 1x revolving) - Electromagnetic spindle brake - Foot-operated safety brake - Coolant system - LED work light - Change gears set - Service tools - 40-position tool post & toolholder set with 4 inserts (Multifix) - 3-axis digital display - Legally required safety guards - Complete DTR technical documentation in Polish - CE certificate - 24-month warranty for all customers at no extra cost

Condition: excellent (used), Year of construction: 1990, Max. Grinding Area: 650 x 370 mm Dedpfx Aoy D Ad Heggskt Longitudinal Table Movement, hydraulic: 650 mm Longitudinal Table Movement, manual: 700 mm Cross Table Movement, hydraulic: 330 mm Cross Table Movement, manual: 370 mm Grinding Spindle Speed: 1450 rpm Table Speed: 5 - 25 m/min Cross Feed: 1.1 mm/min Grinding Wheel Dimensions: 355 x 50 x 127 mm Machine Dimensions (L x W x H): approx. 2700 x 1850 x 2050 mm Weight: approx. 2100 kg Accessories / Special Features: • Automatic vertical feed • As-new safety doors • Electromagnetic chuck 600 x 300 mm • Coolant system • Separate hydraulic unit • Grinding wheel with flange • Control panel on swing arm • Manual dressing device with diamond Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Dkodpswlbz Tjfx Aggst Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm workpiece weight 400 kg table longitudinal travel 650 mm table speeds 2 - 28 m/min table cross travel 400 mm speed 100 - 1000 mm/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 kW peripheral speed 10 - 32 m/sec total power requirement 11 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,95 x 2,65 x 2,47 m Features: Djdpfezrtnisx Aggjkt Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar Machine light Without grinding wheels and flanges.

Condition: new, Year of construction: 2026, CORMAK 660 × 2000 Universal Lathe The CORMAK 660 × 2000 Universal Lathe is a heavy-duty industrial conventional lathe designed for precision metalworking in manufacturing environments. Its robust construction, featuring a massive hardened bed and a powerful 7.5 kW spindle drive, ensures excellent machining stability, dimensional accuracy, and long service life, even under intensive production conditions. Key Features of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum operator safety while significantly reducing downtime by allowing fast and reliable machine stopping. Rapid longitudinal and cross feeds considerably reduce tool travel time, increasing machining efficiency and operator productivity. Versatile machining capabilities including external and internal turning, taper turning, thread cutting (metric, imperial, module, and DP), drilling, broaching, and polishing. Hardened and precision-ground 350 mm cast iron bed provides outstanding vibration damping and high machining accuracy. Large Ø105 mm spindle bore with D1-8 spindle nose allows machining of large-diameter shafts and workpieces. High-performance spindle drive with 7.5/9 kW motor delivers reliable power for demanding cutting operations. Wide thread-cutting range without changing change gears, saving setup time and improving production flexibility. 3-axis Digital Readout (DRO) enhances positioning accuracy and provides better control over the machining process. The machine body is manufactured from high-quality cast iron, providing a substantial machine weight of approximately 3,190 kg, ensuring excellent vibration absorption. The headstock is equipped with a reinforced bearing system for smooth and stable operation throughout the spindle speed range of 25–1500 rpm. A centralized feed gearbox, leadscrew, and feed rod enable precise thread cutting as well as automatic longitudinal and cross feeds. Standard Equipment 3-axis Digital Readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest Follow rest Coolant system Machine work light Operating manual (Polish/English) CE Declaration of Conformity Technical Specifications Parameter Value Swing over bed Ø660 mm Swing over cross slide Ø455 mm Swing in gap (diameter × width) 885 × 170 mm Centre height 330 mm Distance between centres 2000 mm Djdpfx Ajyk Daboggekt Bed width 350 mm Maximum tool shank size 25 × 25 mm Cross slide travel 355 mm Compound slide travel 130 mm Spindle bore Ø105 mm Spindle nose D1-8 Spindle taper Ø113 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–1500 rpm Leadscrew diameter × pitch Ø40 × 6 mm Imperial thread range 2–112 TPI (60 selections) Metric thread range 0.2–14 mm (47 selections) Diametral Pitch (DP) threads 4–112 DP (50 selections) Module threads 0.1–7 Module (39 selections) Longitudinal feed range 0.059–1.646 mm/rev (35 selections) Cross feed range 0.020–0.573 mm/rev (35 selections) Tailstock quill travel 180 mm Tailstock quill diameter Ø75 mm Tailstock taper Morse Taper No. 5 (MT5) Main spindle motor 7.5 kW (10 HP), 3-phase Coolant pump motor 0.1 kW (1/8 HP) Installation dimensions (L × W × H) 334 × 115 × 151 cm Packing dimensions (L × W × H) 340 × 115 × 182 cm Machine weight 3200 kg

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm Dksdpfx Agsx Agiujgot • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: new, Year of construction: 2025, functionality: fully functional, Dobot Collaborative Robot Cobot CRA CR20A High Performance with High Payload and Large Radius Collaborative Robot Building on the safety, efficiency, flexibility, and user-friendliness of the CR series, the CR20A breaks the 20 kg payload limit, thereby opening up a wider range of applications for collaborative robots. With a working radius of 1,700 mm, the CR20A meets the requirements for heavy-duty picking, packing, palletizing, and welding in the automotive, household appliance, logistics, and metal processing industries. User-Friendly Design for Faster Implementation The CR20A features the industry's first dual-channel end-effector design, which can be directly connected to multiple end tools. It also has a visual status indicator on the base for intuitive recognition of the operating state. Dkodpfxezm Ri Tj Agget More Possibilities with High Payload and Large Radius The CR20A has a working radius of 1,700 mm and a maximum payload of 20 kg. Thanks to an advanced motion control algorithm, the CR20A operates more stably and exhibits 50% less residual vibration during rapid emergency stops. 24 Interface Ports for Greater Flexibility The CR20A supports Profinet and Ethernet/IP communication protocols and can be seamlessly connected to the PLC. It has 24 digital I/O ports with industry-leading support for PNP and NPN circuitry for easy application expansion. High Level of Protection for Safe Collaboration The robot housing and control unit meet the high IP54 protection rating. In the event of an overload, the robot automatically triggers an alarm. The CR20A is also equipped with an innovative electromagnetic brake protection system that reduces the drop height of the end tool in the event of a power failure. Application Scenarios: Assembly Sorting Gluing Placement Palletizing Transporting Welding Further details, article numbers, and images are available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping costs vary depending on quantity, weight, and desired delivery terms. Due to the weight and size of the robot, it can be shipped within Germany for €95 gross. Shipping costs to other countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, fuel type: electric, mast type: duplex, power: 2.2 kW (2.99 HP), battery capacity: 20 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, overall weight: 730 kg, color: red, Equipment: CE marking, Elektro-Hochhubstapler 1,5-Tonnen-Elektro-Handstapler mit einer Hubhöhe von 5 Metern Gerbeur électrique 1.5-ton walk-behind electric forklifts with a lifting height of 5 meters Item Unit Specification Product Model ETS Power Unit Battery Basic Parameters Driving Mode Electric-powered travel Rated Load Kg 1500 Load Center mm 500 Tires Tire Type Nylon Wheel Drive Wheel Size (Diameter × Width) mm Φ200*40 Front Wheel Size (Diameter × Width) mm Φ180*50 Rear Wheel Size (Diameter × Width) mm Φ80*93 Additional Wheel (Size) Lift Height mm 5000 Overall Height (With Fork at Lowest Position) mm 2550 Overall Height (With Fork at Highest Position) mm 5500 Fork Ground Clearance (At Lowest Position) mm 90 Basic Dimensions Overall Length mm 1750 Overall Width mm 1000 Fork Length mm 1100 Maximum Adjustable Outer Width of Forks mm 685 Turning Radius mm 1550 Performance Travel Speed (Loaded/Unloaded) Km/h / Lifting Speed (Loaded/Unloaded) mm/s 80/130 Lowering Speed (Loaded/Unloaded) mm/s 110/90 Gradability (Loaded/Unloaded) % / Braking Method Electromagnetic Brake Drive Motor Power KW 0.8 Drive System Lift Motor Power KW 2.2 Battery Voltage/Capacity V/AH 48V/20AH*4 Dkjdpfxjzrhzwj Aggot