Used Ent Edelstahl- Und Nahrungsmitteltechnik Loading- And Unloading Station for sale (45,135)

Condition: new, Year of construction: 2026, functionality: fully functional, temperature: 220 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Powder coating ovens in various sizes 1 Internal dimension Length 1500 - 6,500 [mm] 2 Internal dimension Width 1700 - 1,900 [mm] 3 Internal dimension Height 2,000 [mm] 4 Substructure Steel profile 5 Walls Double-sided galvanized sheets 1mm, exterior RAL 6 Insulation Walls, ceiling Rock wool 150mm 75kg/m² 7 Oven floor Features 2 guide rails for racking carts (optional with conveying system) 8 Temperature 220°C 9 Fans 1 - 2 units 2600 - 15,000 [m³/h] 10 Electric motors 1 - 2 units 1.1 - 6 [kW], 1450 [rpm], 3-phase, 50 [Hz] 11 Thermal output 14 - 99 [kW] Ledpfsfhv Tljx Aifsrp 12 Swing or sliding doors, single or double-sided 2 - 4 units insulated with rock wool 150mm 75kg/m² Heating Indirect via thermal block 13 Thermal block Stainless steel INOX AISI 316, heating electric or gas, heat-resistant fans and heat-resistant bearings, thermal block has overheating protection.

Condition: new, Year of construction: 2026, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. Powder coating booth, open spray booth Lredpfx Aijffwfxefop Overspray during powder coating is collected via the extraction unit. The powder spray booth is delivered on rollers, making it mobile. - The extraction unit is equipped with a 60 L powder container (on castors). - The extraction unit has 4 filters as its first stage. - An absolute filter is located above the booth. 1 Dimensions of the powder booth Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 Fan 1 piece, 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pieces, filter cartridge type 4 Electromagnetic valves 2 pieces, 1” “Turbo” Italy 5 Absolute filter 1 piece, bag filter type 2. Powder curing oven 1 Internal dimension Length 4,000 mm 2 Internal dimension Width 1,500 mm 3 Internal dimension Height 2,200 mm 4 External dimension incl. thermal block Length 5,250 mm 5 External dimension incl. thermal block Width 2,050 mm 6 External dimension incl. thermal block Height 2,530/2,750 mm 3. Control cabinet 4. Manual conveying system The "System Mantion" conveying system is designed for a maximum load of 250 kg per carrier and 750 kg per trolley.

Condition: new, Year of construction: 2026, Powder coating oven 3,500 x 1,900 x 2,000 mm 1 Internal dimensions Length 3,500 mm 2 Internal dimensions Width 1,900 mm 3 Internal dimensions Height 2,000 mm 4 Substructure 1 set Steel profile 5 Walls 1 set Double-sided galvanized sheets, 1 mm thick, exterior RAL color 6 Insulation, walls, ceiling 1 set Mineral wool, 150 mm, 75 kg/m² 7 Floor Oven is equipped with 2 guide rails for loading carts 8 Temperature 220°C 9 Fans 1 unit 7,500 m³/h Lrsdpfsfhv Tcox Aifsp 10 Electric motors 1 unit 3 kW, 1450 rpm, 3-phase, 50 Hz 11 Thermal output 58 kW 12 Double doors, one-sided 2 units Insulated with mineral wool, 150 mm, 75 kg/m² Heating Indirectly via a thermal block 13 Thermal block 1 set Stainless steel, INOX AISI 316, heating with electric, heat-resistant fans and heat-resistant bearings, thermal block has overheating protection 14 Burner 1 unit Oven is heated electrically 15 Exhaust 1 unit Device for exhaust pipe, manual damper control

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and further modifications can be taken into account during design and planning. Ljdpjbhh Awsfx Aiferp The offer includes the following components: Booth for chemical pre-treatment (3 zones) with spray manifold Walk-in coating booth Powder gun Powder curing oven Manual conveying system Electrical control Example: (all sizes can be individually adjusted) Space requirement: 30 x 15 meters Part size: L = 6,200 mm W = 2,300 mm H = 2,000 mm Walk-in cleaning booth incl. automatic spray manifold 1 Dimensions of the booth Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the booth complete Length 9,140 mm including tanks Width 5,580 mm Height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of the booth Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the booth including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing oven 1 Internal dimensions Length 6,500 mm 2 Internal dimensions Width 2,500 mm 3 Internal dimensions Height 2,950 mm 4 External dimensions incl. thermal block Length 7,600 mm 5 External dimensions incl. thermal block Width 2,800 mm 6 External dimensions incl. thermal block Height 3,100 mm Manual conveying system The conveying system consists of: 1. Support structure, consisting of steel elements, 120x120mm / IPE 160 2. Roller units - No. 9862 GL, 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Roller units - No. 9862 GLHT, 24 pieces 6. Connecting pieces – No. 9061M, 34 pieces 7. Mounting clips - No. 9067/180, 234 pieces 8. Stoppers - No. 9169, 21 pieces 9. Movable locking mechanism - No. 9601 VM, 6 pieces 10. Fixed locking mechanism - No. 9601 VF, 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it, we can control all of the above-mentioned units and consists of: - PLC - Touch screen 5“ color -easy view- - Modem - Thermal magnetic switch, fuse (Telemechanique, Siemens, ABB). - Cables, brackets, pipes, etc.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW Lsdpfeulwg Nsx Aifjrp min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Lrsdjum Ufljpfx Aifop Conveying technology (cycle process) Electrical control system

Condition: new, Year of construction: 2026, Powder Coating Starter Packages Starter sets or individually designed packages for starting your own business in surface technology, e.g., for coating rims: This package includes two sample setups for starting powder coating or expanding existing businesses. Our focus is on providing individual consulting tailored to the customer's budget and requirements. Modifications and special requests are standard practice. Proven, reliable, and low-maintenance technology is at the heart of our offerings. Set 1: Powder curing oven 2,000 x 1,900 x 2,000 mm (internal dimensions) 150 mm thick mineral wool insulation for the walls, ensuring energy-efficient and cost-saving operation 36 kW thermal output for fast heating times Oil, gas, or electric heating 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to the workpieces Up to 220°C Lsdpfxebqk Nbe Aifjrp Powder coating booth (open spray booth) Dimensions of the powder booth Width 2,100 mm Depth 2,000 mm Height 2,200 mm Fan 6,000 m³/h electric motor 3.0 kW for a clean working environment Filter ø 325x600 4 pcs. Type filter cartridges with interval-controlled self-cleaning Post-filtration via bag filters Wagner powder coating system, manual system "Sprint 2 B" Current model from the premium manufacturer Wagner for perfect coating results (other brands available on request) Corona hand gun PEM-C4 Ergo Control unit EPG-Sprint Conveyor system with Fluidkrone ST 550/10 Powder injector PI-F1 Equipment trolley with vibrating table Set 2: Powder curing oven 1,500 x 1,200 x 1,750 mm (internal dimensions) 150 mm thick mineral wool insulation for the walls, ensuring energy-efficient and cost-saving operation 14 kW thermal output for fast heating times Electric heating 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to the workpieces Up to 220°C Powder coating booth (open spray booth) Dimensions of the powder booth Width 1,200 mm Depth 1,100 mm Height 2,380 mm Fan 2,500 m³/h electric motor 1.1 kW for a clean working environment Filter ø 325x600 2 pcs. Type filter cartridges with interval-controlled self-cleaning Post-filtration via bag filters Wagner powder coating system, manual system "Sprint 2 B" Current model from the premium manufacturer Wagner for perfect coating results (other brands available on request) Corona hand gun PEM-C4 Ergo Control unit EPG-Sprint Conveyor system with Fluidkrone ST 550/10 Powder injector PI-F1 Equipment trolley with vibrating table

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection Lrodpfx Aisyug R Rjfjp • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. Lsdpfx Aijyug Hxjfjrp An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 1993, Manufacturer: Guinard Centrifugation (Andritz) Model: D5LP50HBIL Year : 1993 Type: Decanter / centrifugal separator   Previous use: sludge Lrjdsx R A A Aepfx Aifop Nominal speed: 2700 rpm - Maximum: 3200 rpm Nominal diameter : 520 :mm Power: 45 KW   Output extraction / pumping system Inspection report 12,000 H : available (29/01/2021)

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Lsdpjy Spnujfx Aiferp Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: excellent (used), mileage: 318,695 km, fuel type: diesel, gearing type: mechanical, first registration: 12/1994, color: white, Year of construction: 1994, Engine capacity: 2,500 cc Unladen weight: 2,080 kg Lsdpoywclkofx Aifjrp Payload: 640 kg gVW: 2,720 kg Technical condition: very good Optical condition: very good Contact Thierry Leemans for further information.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside Lrjdpfx Ajyxhq Usifsp - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 1,000 mm, Fire-resistant doors, each door is new, unused, and of high quality, opened for photography. 2 fire-resistant doors from Teckentrup Door Solutions (distributed by KAMO Kran und Toranlagen). Protective doors, steel doors, door manufacturer Teckentrup T30 FSA 62 (interior doors), single-leaf. DIN right, 1000 x 2000 mm, primed RAL 9002 gray-white, and 1 mm steel galvanized. The doors have never been installed. Surround frame (1 piece) for masonry 265 mm with GEZE sliding rails. 1 top - door closer, magnetic contact, and bolt contact for status monitoring. Lock with panic function, door handle set, 1 x additionally with integrated electric door opener. Fire-retardant. The door leaf is 62 mm thick. Unused and in new condition, for sale. An opportunity for optimal fire protection of interior spaces. Price negotiable. Our asking price is €1,150.00 net, ex works, plus packaging costs. Lrsdpfxohf I Ewj Aifep All technical specifications are subject to typographical errors and errors. Sale only within the countries of the European Union.

Condition: used, -Dimensions (LxWxH): 825x970x1830 mm -Maximum permitted weight: 75 kg -Fermentolevain FL80 -Total usable weight: 60 kg -Total capacity: 140 L -Power: 1.15 kW -Voltage: 380 V -Weight: 220 kg Iisy Tdu Dewxx Ikocof -Year of manufacture: 2006 -Features: Galvanized steel frame -Mounted on 4 swivel wheels, 2 with brakes -Tank and tools in stainless steel Lsdpswxx Ikofx Aifjrp -Electronic control panel with memory -Cleaning system with washing shower -Reinforced motor

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT Lsdpov A Enyjfx Aiferp - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: new, axle configuration: 3 axles, tire size: 385/65R22,5, color: silver, Year of construction: 2026, General Information Year of manufacture: 2026 Axle Configuration Tire size: 385/65R22.5 Axle brand: BPW Rear axle 1: Lift axle; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Lrodpfx Aisy U Ivcefjp Unladen weight: 8,167 kg Payload: 33,833 kg GVW: 42,000 kg Additional Information Please contact Mark van der Steen for further information.

Condition: new, power: 5 kW (6.80 HP), gearing type: other, fuel type: gasoline, color: black, driver cabin: other, Vehicle location: Bovenden, Body: Hyundai gasoline high-pressure cleaner ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lredpfx Aiovhk Szjfop - .

Condition: ready for operation (used), functionality: fully functional, The unit comes with rotor and accessories !!! ⚙️ Thermo Scientific Cytospin 4 — technical specs 🧪 Performance Lrsdpfozivxlox Aifop Speed range: 200 – 2000 rpm Max RCF: ~850 × g Capacity: up to 12 specimens per run Timer: 1 – 99 minutes Program memory: up to 23 stored routines 📏 Physical & electrical Dimensions (H × W × D): ~9.5 × 16 × 24.5 in (≈ 24 × 40.5 × 62 cm) Weight: ~12 kg (26.5 lb) Power supply: 100–240 V, 50/60 Hz Power consumption: ~150 VA max 🧠 Control & programming Digital keypad with programmable protocols Acceleration control (multiple ramp settings) Speed and time display windows Standby mode for power saving 🔒 Safety & design Auto-locking lid (won’t run unless locked) Imbalance / overspeed / lid alarms Sealed rotor head with viewing window Spill-resistant internal design Complies with IEC 61010 safety standard 🧬 Functional features Produces thin-layer cell deposition on slides Compatible with Cytospin 1–3 protocols Supports disposable or reusable sample chambers Designed for low-cellularity samples (e.g., CSF, urine) Good working condition. Please check out our other listings as well.

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Lredpsxx Aqyefx Aifsp Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for a AdvanDx PNA Fish Workstation Dry Bath Incubator The AdvanDx PNA FISH Workstation provides a hybridization incubation platform for PNA FISH applications. The AdvanDx PNA FISH Workstation can hold up to 30 microscope slides. Lodpfsxzg E Hjx Aifjrp

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2003, total length: 11,240 mm, total width: 1,900 mm, wheelbase: 880 mm, color: other, Year of construction: 2003, = Additional options and accessories = - Spare tire = Remarks = Damages: none XL919629135075522 = More information = Empty weight: 4.900 kg Carrying capacity: 3.100 kg GVW: 8.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: OH-15-HL = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Ledpfx Aioynh Ikeferp If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Part suitable for: cars Lrsdpox N R R Esfx Aifep Technical condition: very good Optical condition: very good

Condition: excellent (used), Part suitable for: cars Technical condition: very good Lsdpfex N R Scjx Aiferp Optical condition: very good

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop Lodegvq Hlspfx Aiforp - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided