Used Fervi Sandblaster for sale (353)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27, L214 Jib, and Winch Liftable drive axle Liftable axle Drive axle RTS2370A. Dual-axle single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E - Onboard diagnostics Cab color: signal white Heated and electrically adjustable mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front-view mirror Exterior sun visor LED main headlights Headlamp cleaning system Automatic light switching between daytime running and dipped beam Automatic headlamp leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED beacon lights (orange), mounted on the front of the cab roof Cgedpox A Npdefx Ahvew Cab roof pass-throughs, both sides Pre-wiring for roof-mounted headlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and CB radio preparation Roof bar for accessories, front Emblems/type designation factory-mounted Emission type plate (Euro...) L plate (low-noise vehicles -96) Flatbed executed as steel/welded construction, fixed-mounted, low design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Removable aluminum drop sides, make Suer, height 600 mm, anodized finish, per side (R and L) Recessed lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible positioning 6 x stake pockets for stanchions (3 per side) Hydraulic extension of the flatbed up to approx. 1200 mm, galvanized, loadable up to 3000 kg, extendable with lighting and underrun protection, as low as possible, operable via radio remote control Robust front wall made of welded frame with recessed stanchion depot pockets Cladding panels, fenders made of tread plate, sandblasted, powder-coated and painted in vehicle color Toolboxes between rear axles fitted with tread plate 5 pcs. toolboxes, natural finish tread plate, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted, powder-coated and painted in vehicle color. Mounting of rear underrun protection and additional stabilizer, including installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics F545RA.2.27 xe-dynamic » Base unit Winch type V 20, for double-strand operation with folding pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle lever system with PROLINK (overbending articulation up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load-holding valves XF system (Extra Fast) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on the display Danfoss D850 control block with 4 control valves mounted on the crane column Emergency control for crane operation High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) Codpfx Asxn Eckjhvsgw * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear Cedsy Ei R Aepfx Ahvegw • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, maximum load weight: 24,200 kg, overall weight: 31,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2026, Equipment: ABS, WIESE 2-Axle Hooklift Trailer with Lift Axle, Brand New Vehicle Data: Type: WAK 2-25 SK Gross Vehicle Weight: 31,000 kg Axle Load: 20,000 kg Fifth Wheel Load: 11,000 kg Unladen Weight: approx. 6,800 kg Payload: approx. 24,200 kg Dimensions: Overall Length: approx. 7,100 mm Overall Width: approx. 2,500 mm Fifth Wheel Height: approx. 1,150 mm Roller Height (equipment): approx. 1,500 mm Chassis / Axles: 2 x SAF axles, each 10,000 kg Disc brakes Air suspension with lift and lower function Cgodpfeyt T A Dsx Ahvow 1st axle liftable (lift axle) Axle spacing: 1,820 mm Brake System: WABCO two-line compressed air brake system EBS electronic braking system Automatic brake force regulator Spring-loaded parking brake Tyres: 4x 425/65 R22.5 tyres Steel rims Hooklift / Hookloader: VDL hooklift, push/knuckle design Type: SK25-6750 DE Lifting/Tipping capacity: 25,000 kg Container length: 5,000 – 7,250 mm Hook height: 1,570 mm (DIN 30722) Tip angle: approx. 50° Max. oil pressure: 350 bar Equipment – Radio remote control with display: ControllerPlus control system Softstop (gentle lowering) Softslide (smooth container shifting) Automatic axle stabilisation during hydraulic operation Manual control for emergency operation Additional Equipment: 4 work lights 24V lighting system as per StVZO 7-pin and 15-pin socket at the front 2 gearbox support winches (2-speed) 4 plastic mudguards Wheel chocks Rear light bar with mud flaps Paintwork: Chassis sandblasted, primed, and painted Reflective tape on sides and rear according to EU regulations If you have any questions, please do not hesitate to contact us at any time.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement Cgodpfx Ajy Ei Rvjhvew • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Cgedpjy Ei R Nefx Ahvjw Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) Codpfx Ajxn Ebmjhvjgw * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Cgjdpjydggqsfx Ahvsw Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems Cjdpsx A Nntsfx Ahvegw RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Cgedpfettah Uex Ahvew Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications Cgjdpfey El Anox Ahvjw • All accessories are original EOS parts → perfectly matched system _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Heavy-duty trailer Condition: Ready for use and fully functional Technical condition: good Description: 2-axle, 3-way tipper trailer from SCHWARZMÜLLER with aluminum walls - - - Payload 13.5 tons - - - Tare weight 4.5 tons - - - Year of manufacture 1997 - - - Walls can be swung and folded open - - - Rear wall opens automatically - - - 1st wall: 80 cm aluminum, original Schwarzmüller - - - Extension walls: 60 cm aluminum - - - Undercarriage and platform base have already been sandblasted, primed, and painted - - - 2-circuit compressed air system - - - Lighting system - - - Internal platform dimensions: width 2.42 m, length 5 m - - - Tires approximately 80% - - - with Austrian registration documents. Cgjdpozhdn Ssfx Ahvew

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,350 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, Cjdpfozcm Hujx Ahvogw We offer for sale new 11 m3 containers manufactured in our own production facility. The containers feature the following specifications: - Manufactured according to DIN 30722-1 - Lifting bracket with 50 mm diameter - Hook height 1570 mm - Internal body length 6,000 mm - Internal body width approx. 2,350 mm - Internal body height 800 mm - Floor made of 5 mm S-235 grade steel - Side walls made of 3 mm S-235 grade steel - Sheets and profiles continuously welded - Mostly stress-free construction - Floor brace spacing approx. 350 mm - Top chord made of S-355 special steel - All-round net hooks - External rollers, lubricatable and replaceable - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Tare weight approx. 1,900 kg - Payload approx. 13,100 kg - All steels sourced from Thyssen Krupp - All steel parts automatically sandblasted before processing - Double zinc phosphate primer with 120 µm - 2K coating in RAL 7016 with 80 µm - 6x 5t lashing points in the body floor - 2x 7t lashing points on the inside of the front wall - Traversable, spring-relieved hinged flap - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Unit price: €5,700.00 plus VAT - Also available in stock in 5.5 m Delivery throughout Germany is possible for an additional charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sales excepted.

Condition: used, overall weight: 24,500 kg, plate height: 450 mm, plate length: 4,000 mm, plate width: 3,000 mm, 2 pieces of clamping plates with T-slot. Plates are painted. Surface is sandblasted and preserved. Cgodpfszbctzsx Ahvew

Condition: used, overall weight: 23,000 kg, plate height: 600 mm, plate length: 7,000 mm, plate width: 3,000 mm, 2 pieces of clamping plates with T-slot. Plates are painted. Surface is sandblasted and preserved. Cgjdpszbcrwefx Ahvsw

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 3734, Equipment: CE marking, DANTHERM Filtration dust extraction and welding fume extraction system. This vacuum extraction system is ideal for welding processes, plasma cutting, laser cutting, sandblasting, shot peening, plastic processing, and the removal of all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The set includes a complete set of automation equipment, an electrical distribution panel, connecting elements, and a silencer. Additionally, we can provide individual workstation extraction units. Fan power: 15 kW – smooth, frequency inverter-controlled operation. Cjdpfjzh T S Tox Ahvsgw Capacity: up to 9500 m3/h. Vacuum: up to 4000 Pa.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146 Csdpfxjzd Twbj Ahvegw

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Cgsdovx Eccepfx Ahvow Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Descriptive Document of the Machinery “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine name: Printer Slotter - Model: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 ° Slotter overhauled to as-new condition ° Partial printing unit overhaul (new anilox cylinder and rubber roller, new compensator, new bearings, new lubrication pump, overhauled ink feed pump) ° Partial feeder overhaul (new feeder wheels, new lubrication pump, main motor completely overhauled by CEAR, new CAM bearing) ° Static unit overhauled to as-new condition Complete sandblasting and repainting of all machine assemblies. - Year of Partial Electrical Overhaul: 2025 Includes replacement of: sensors / push button panels / onboard cabling / solenoid valves / electrical junction boxes for machine groups. 2. Technical Specifications: - Dimensions: Length 4800mm; Cylinder Circumference 1860mm - Speed: Maximum rotation 5,500 cycles/hour under optimal conditions - Minimum shaft center distance: 450mm - Sound pressure level (feeding area): 85dB (A) - Sound pressure level (delivery area): 82dB (A) - Electrical characteristics: Supply 400Vac Three-phase 3P+PE Nominal Power: 70KW Power Consumption: 57KW Nominal Current: 102A Operating Current: 82A - Production speed: approximately 5,000 boxes/hour in sync mode, approximately 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table Group with automatic positioning of side guides and bundle support gate. - Printing Unit Group with automatic print presetting - Slotter Unit Group with extending and automatic presetting (knife heads) and carton height adjustment - Static Unit Group Codoyifdvspfx Ahvogw 4. Safety: - The machine is fitted with protective guards on all moving parts, equipped with sensors to detect guard opening. - Each machine group is provided with an emergency stop mushroom button and a rope pull switch to instantly halt group movements. 5. Electrical Equipment: - Main electrical cabinet housing all control and power distribution components - Operator control desk/console complete with touch screen panel 6. Components not included, for possible installation: - Cable tray and optional accessories - Command and power cables between cabinet/console/machine assemblies - Network bus cables -Price Negotiable Note: Possibility to purchase a Die-Cutter and Stacker (year 2008, requires overhaul)

Condition: new, mileage: 2 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. Cgjdpfx Ahey R Ud Eevjw - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,420 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering brand new hooklift flatbeds with steel side walls, manufactured in-house, for sale. The flatbed features the following specifications: - Manufactured according to DIN 30722-1 - Lifting bar diameter: 50mm - Hook height: 1,570mm - Usable platform dimensions: 6,000mm x 2,420mm x 800mm - 2x galvanized ladder rungs - 5mm S-235 steel floor plate - Plates and profiles fully welded - Each side equipped with spring-assisted steel drop sides, 3mm S-235 grade steel - 7x side wall hinges per side for enhanced performance - Drive-over and spring-assisted tailgate (4.5t point load!) - Side walls, tailgate & rear posts can be completely removed quickly if required - External rollers are greaseable and replaceable - 5 pairs of recessed lashing rings, each with a tensile load of 2.5t, variably positionable in MultiLock rails - Front side with 2 lashing rings, each with a tensile load of 7t - All steel parts are automatically sandblasted before further processing - Only high-quality steel from Thyssen Krupp used, including certification - Primed with premium 2K zinc phosphate primer - Painted with high-quality 2K paint in RAL 7016 - Warning markings according to §32 (1) German Road Traffic Regulations (StVO) & DIN 67520 - Includes type plate & container certification according to DGUV Rule 114-010 (formerly BGR 186) - Immediately available - Unit price: €7,000 plus VAT - Other platform lengths in stock (4.5m / 5m / 5.5m / 6.5m) Nationwide delivery available at extra cost! Codeyrpkzopfx Ahvegw If you are interested in other hooklift container products, we would be delighted to receive your inquiry!

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 14,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,420 mm, loading space length: 5,500 mm, loading space height: 800 mm, Dear Sir or Madam, We offer for sale, from our own production, brand new roll-off tipper bodies with steel side panels. Cjdpszbaaxjfx Ahvjgw The tipper body features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Body usable length 5,500mm - Body usable width 2,420mm - Body internal height 800mm - Front panel height 1,600mm - 5mm floor plate - Plates and profiles continuously welded - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - The outer frame profiles are made of reinforced S-335 steel - All steels sourced from Thyssen Krupp, including certificate - Laterally spring-relieved steel side panels with 3mm steel thickness - Due to the spring relief, the side panels can be moved laterally with one hand, making them very easy to handle during operation - Drive-over & spring-relieved rear gate - Outer rollers are lubricatable and replaceable - 4 pairs of recessed lashing hooks in a multilock rail with a tensile force of 2,500 kg each - Front side: 2 lashing rings with 7,000 kg tensile force each - Rear side: 2 completely recessed 5t lashing eyes - Stable design - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 16,000 kg - Tare weight approx. 1,900 kg - Payload approx. 14,100 kg - Complete zinc phosphate primer - 2K coating in RAL 7016 - Incl. type plate & container testing according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price €6,800.00 plus 19% VAT - Also available in other usable body lengths (4.5m / 5m / 6m / 6.5m) Delivery throughout Germany possible for an additional charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,200 kg, empty load weight: 1,800 kg, loading space volume: 10 m³, loading space width: 2,350 mm, loading space length: 5,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering new 10m³ containers for sale, manufactured in our own production facility. The containers feature the following specifications: - Manufactured according to DIN 30722-1 - Lifting beam, 50mm diameter - Hook height 1570mm - Internal body length 5,500mm - Internal body width approx. 2,300mm - Internal body height 800mm - Floor made of 5mm S-235 steel - Side walls made of 3mm S-235 steel - Sheets and profiles continuously welded - Largely stress-free construction - Floor stringer spacing approx. 350mm - Top rail made of S-355 special steel - All-round net hooks Cgedpfx Ahoza U Hkovow - External rollers, greaseable and replaceable - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 15,000kg - Tare weight approx. 1,800kg - Payload approx. 13,200kg - All steels sourced from Thyssen Krupp - All steel parts automatically sandblasted before processing - Double zinc phosphate primer with 120µ - 2-component paint in RAL 7016 with 80µ - 6x 5t lashing points in the body floor - 2x 7t lashing points on the inside of the front wall - Drive-over, spring-relieved hinged flap - Incl. type plate & container inspection according to DGUV Regulation 114-010 (formerly BGR 186) - Unit price: 5,500.00€ plus VAT - Also available in stock in 6m length Nationwide delivery is possible for an additional charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player Csdpfxjy R Ar Rs Ahvogw = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for troop transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Military Operations: Troop and equipment transport. - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day ...

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Codpfxey U Auyj Ahvegw Lighting: • 1 x LED AS, each 1x on