Used Flake Purifier 2048 Cmn Version for sale (4,594)

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Hodsxr Umgepfx Abgjp Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Hedpfozb Idrsx Abgep Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Hsdpfxszb Idfe Abgop Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Hedpfozdkttsx Abgsp Safety devices Prepared for dust and chip extraction

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Hedpfxsw U Tlzj Abgop Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Model - Formpack F0 TMF Long Version. Serial number - F438. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Hedpfxowp Ac Hj Abgsp Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Hsdpfjzd Uqcex Abgsp Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Hjdpsrzbfcsfx Abgjp

Condition: excellent (used), functionality: fully functional, Provisur Weiler 878 grinder, 50hp model. Greta machine for burger, sausage, Petfood manufacturer. Can mince fresh or frozen flaked meat. Extended hopper. Hodpfx Aox Av Ruebgjp

Condition: excellent (used), Flake ice machine on stand, can produce up to 3.2 tonnes per day of flake ice. Lovely condition. 3 in stock. Hjdpfxjh Nnd Rj Abgjp

Condition: good (used), Direct from UK factory where it was filling water based solutions into bottles. Single head version also available. Hodpfxoyzcv Do Abgop

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Hsdpew H Adrofx Abgep

Condition: excellent (used), 2017 Multi Purpose Cooker, 6 rack capacity. Superb condition, bought new in 2017 and lightly used in meat free factory. Beautiful, immaculate condition, try finding another as clean as this inside. We also have an eight rack version of this from 2012. Hsdpfx Ajrd Rp Ujbgep

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: PI2E310140HB2M, Equipment: air conditioning, centrifugal blower fan (backward-curved impeller) with an EC motor. These are commonly used in: HVAC ventilation systems Heat recovery units (MVHR) Air handling units Commercial extraction systems Fan coil units and air purifiers The label shows: Manufacturer: PSCME Model: PI2E310140HB2M 230V AC, 50/60 Hz 390 W 1190 RPM It also has 10 VDC / PWM speed control inputs, which means its speed can be electronically controlled. The wheel shape with the curved blades is designed to move a large volume of air efficiently and quietly. In simple terms, it's essentially the motor and fan assembly from a ventilation or air-conditioning system. If you found it separately and want to know: What machine it came from Its approximate value How to test it How to wire it up I can help with that too. A clear close-up of the entire label and any stickers or markings would help identify the exact application. Based on the label in your photos, I can identify it more precisely. Model Details Manufacturer: PSCME Model: PI2E310140HB2M Type: EC centrifugal blower fan Voltage: 230V AC, 50/60 Hz Power: 390W Speed: 1190 RPM Control: 0–10V DC or PWM speed control What is it used for? This type of fan is usually found in: Heat recovery ventilation systems (MVHR) Air handling units (AHUs) Commercial ventilation systems Kitchen extract systems Industrial air circulation equipment The 310 in the model number suggests a wheel diameter of around 310 mm. Approximate Value Used value depends on condition: Untested: £30–£80 Tested and working: £80–£200 New equivalent: £250–£500+ Wiring According to the label: AC Supply Brown = Live Blue = Neutral Green/Yellow = Earth Speed Control Red = 10 VDC output Blue = Ground Yellow = 0–10 VDC / PWM control input White = FG (tachometer/fan speed signal) ⚠️ Since this runs on mains voltage (230V), it should only be wired and tested if you're comfortable working safely with mains electricity. Hodpfszf Ibqsx Abgsp What machine did it come from? The fan itself is generic and could have been fitted by manufacturers such as: Vent-Axia Nuaire Systemair FläktGroup S&P (Soler & Palau) Airflow Various Chinese OEM ventilation units If you have all 10 photos, please upload them (or especially any photos showing labels, stickers, or the complete unit it came from). I may be able to identify the exact machine and tell you its likely resale value more accurately.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Year of Manufacture: 2018 Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Water side: 10 bar Operating Conditions: Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Hodpfxew R Ualo Abgjp Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed with air knives with pressure roler belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm Hsdpfxozhkz So Abgjp

Condition: used, functionality: fully functional, mileage: 301,436 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Hsdpfx Asyta S Eebgop Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 446,350 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Hsdpfx Abezhm Tdogsp Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 10 mm Rear left outer - 10 mm Rear right inner - 10 mm Rear right outer - 10 mm

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Hsdpfx Abehwhfuegjp CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), mileage: 161,297 km, power: 100 kW (135.96 HP), first registration: 07/2018, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2018, Equipment: air conditioning, tail-lift, trailer coupling, = Additional Options and Accessories = - Tail lift = Notes = Dual tires, payload: 977 kg, unladen weight: 2523 kg, gross vehicle weight: 3500 kg, towing capacity, unbraked: 750 kg, towing capacity, center axle, braked: 3500 kg, trailer coupling, air conditioning, engine power: 100 kW (134 hp), fuel: diesel, Euro: 6, number of seats: 2, tail lift, tail lift size: 195 x 130, AC tail lift, EURO6, detachable tow hitch, 3500 kg, original Dutch version. = Further Information = Axle configuration Tire size: 195/75R16 Hedpfjzhgc Ejx Abgep Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth, left: 7 mm; Tire tread depth, right: 7 mm Axle 2: Dual tires; Tire tread depth, left, inner: 8 mm; Tire tread depth, left, outer: 7 mm; Tire tread depth, right, inner: 8 mm; Tire tread depth, right, outer: 8 mm Weights Unladen weight: 2,523 kg Payload: 977 kg GVW: 3,500 kg Maintenance APK (Technical Inspection): valid until 09.2026 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: 326 € per month (delivery van, 72 months); Please inquire for further information and conditions Identification License plate: V-345-RF

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Hsdpfxoyk Evqo Abgep Key Features Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, Year of construction: 2006, power: 31 kW (42.15 HP), input voltage: 400 V, input current: 53 A, input frequency: 50 Hz, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,575 mm, travel distance Z-axis: 265 mm, number of axes: 3, number of slots in tool magazine: 8, overall weight: 5,700 kg, Equipment: CE marking, Biesse Rover C 6.40 Config 1 FT CNC machining centre Description ROVER C 6.40 FT - numerically controlled machining center Working fields - configuration 1 - X= 3685 mm; Y = 1575 mm; Z = 265 mm CE Safety devices FT Work Table - dimensions X = 3685 Y = 1560 mm 6 Stops with a stroke of 115 mmBack work station 6 Stops with a stroke of 115 mmFront work station 4 Side stops with a stroke of 115 mm (2 Lh + 2 Rh) inclusive of the pneumatic system Vacuum system for 2 300 m3/h pumps 300 m3/h vacuum pump Configuration 1 Composition C1-A1 Boring head BH 22 L SLOT 1 9 kW (12.2 HP) Electrospindle, HSK F63 adaptor, air cooling Prearrangement for the assembly of a 360° operating unit (C axis) Hsdpfjzgwa Sjx Abgjp Revolving tool changer with 8 places Composition C1-P1 Automatic lubrication system Colour LCD in replacement of the standard LCD. Software update from BiesseWorks (machine version) to BiesseWorks Advanced (machine version) BiesseWorks - Advanced programming system CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), mileage: 328,648 km, power: 105 kW (142.76 HP), first registration: 10/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,500 mm, total width: 2,100 mm, total height: 3,000 mm, loading space length: 3,680 mm, loading space width: 2,010 mm, loading space height: 2,070 mm, Year of construction: 2020, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, power mirror, seat heater, traction control, trailer coupling, = Additional options and equipment = - Halogen lamp - None - Manual - Radio/cassette - Reversing camera - Lane departure warning system - Fabric - Partition wall = Remarks = Configuration: 4x2, Unladen weight: 2350 kg, Gross weight: 3200 kg, Tow hitch, Cabin type: single cab, Air conditioning, Number of airbags: 1, Parking assistance: none, Electric mirrors, Partition wall, Radio/cassette, Carplay, Color: white, Metallic, Lighting type: halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Engine power: 105 kW (141 hp), Fuel: diesel, Euro 6, Drive technology: timing chain, Transmission type: automatic, Power steering, ABS, ASR, Starter battery, Body type: extra-long version, Roof rack: none, Rear closure: tail lift, Central locking, Number of seats: 2, Seat configuration: 1+2, Seat upholstery: fabric, Manual seat adjustment, ac automatic EURO6, Tire type: all-season tires Hedpexu Ubpofx Abgsp = Further information = Axle configuration Brakes: disc brakes Suspension: leaf suspension Weights Unladen weight: 2,350 kg Payload: 850 kg Gross vehicle weight: 3,200 kg Functional Loading height: 82 cm Maintenance APK (main technical inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification Registration number: KLEYN1

Condition: used, mileage: 592,683 km, power: 280 kW (380.69 HP), first registration: 02/2004, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 5,520 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: air, total length: 9,700 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 710 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tachograph (control device) - Fixed - Halogen lights - Tail lift - Manual - Sleeper cab - Fabric - Central lubrication = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,250 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 510 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Central lubrication, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lights, Engine power: 280 kW (375 hp), Fuel: Diesel, Emission standard: Euro 3, Transmission type: Manual, Gearbox manufacturer: Scania, Gears: 6, Clutch pedal, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: fold-under tail lift, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R. Cargolift, Tail lift material: Aluminum, Spare wheel, Spare wheel tread: 3 % = Further Information = Transmission Transmission: SCA, 6-speed, manual transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 11 mm; Tire tread right: 12 mm Axle 2: Tire size: 295/80R22.5; Twin tires; Inner left tire tread: 15 mm; Outer left tire tread: 15 mm; Inner right tire tread: 15 mm; Outer right tire tread: 15 mm Weights Unladen weight: 8,250 kg Payload: 9,750 kg Gross vehicle weight: 18,000 kg Functionality Tail lift: B.A.R. Cargolift, fold-under flap, 1,500 kg Loading floor height: 130 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands and all years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good prices • Honest dealing • We speak many languages • We understand our customers • Support with import and transport • (Export) registration handled quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Hodpey Hqlwefx Abgep Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Hjdpfxjxv A Rbe Abgjp Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications