Used Frech Accessories For Die Casting Machines for sale (80,168)

Year of construction: 2024, condition: used, functionality: fully functional, Maximum paper feed size ( mm ): 1320*980mm Minimum paper feed size( mm ): 350x450mm Maximum die cutting size( mm ): 1300x960mm Cedjw Rwipjpfx Akqsrf Minimum mouth size( mm ): 8mm Maximum die cutting pressure( T ): 350N/cm² Machinable paper( mm ): 200-2000g/ m² / 10mm (max thickness) Die cutting accuracy( mm ): ±0.1mm Maximum speed(sheets/hour): 5500 sheets/h Maximum stack height of paper feed(mm): 1400mm (above the level) Minimum stack height for receiving paper(mm): 1250mm (above the level) Gross power(KW): 18.5kw Machine weight(T): 19 T Overall dimension: 7500x2200x2250mm

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min Crsdpjxv Si Tefx Akqsf weight 4400 kg motor power 14 KW Condition is very good, ready for production

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Csdpjw Uhriefx Akqorf Ready for production!

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Crodpfx Akjyha N Heqsf Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Year of construction: 2017, condition: used, functionality: fully functional, The press was operated from 3/2017 until 2022 when was professionally dismantled. It is stored in a protected warehouse, in Kirov, Russia. The press was operated for a maximum of 6 days a week in 2 shifts. It was sold more than 60,000 large washbasins produced on this press. Price of 280 000 EUR. The owner of the press is Dřevojas, Czech republic. Price for new machine was 456 000 EUR. Width: ~4920 mm Cedpfxsrt Tw Ds Akqjrf Length: ~14020 mm Height: ~3085 mm Weight: ~45 ton (product purchase trolley group and moulds are not included) Max Mould size: 1000mmx1700mmx650mm Max mould number: 8 Horizontal or 12 Vertical Energy: 380 V Air: 16 bar Cudtjikx Water (45°C): 4 bar (min.) Water (70°C): 3-4 bar

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 101 125664, total width: 3,100 mm, total length: 10,000 mm, input voltage: 380 V, overall weight: 40,000 kg, • Buhler 840T • Manufacture No 101 125664 • Year 1985 • Refurbished and installed in 2016 by PVM in Germany. • Runs on 3 phase 380V Cedozabp Sepfx Akqsrf • Original Intercirc Machine with wiring and manuals • Fitted with new panel 2016. • New pump fitted 2025 • Weight circa 40T • Length 10 meters / width 3.1 meters / height 2.8 meters • Electric Morgan furnace 72kw • Colosio auto ladle system. Working machine making aluminium components up to 6kg shot weight as recently at April 2026. Buyer responsible for de-comissioning, moving and transporting.

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Crsdpsy Suz Tofx Akqjf

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clearance between the columns: 640 mm, closing stroke: 640 mm, total height: 2,500 mm, total width: 2,400 mm, stroke length: 480 mm, total length: 7,500 mm, column diameter: 120 mm, ejector force: 240,000 N, ejector stroke: 145 mm, mold height (min.): 250 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 16,600 kg, clamping force: 4,600 kN, power: 31.5 kW (42.83 HP), workpiece weight (max.): 8 kg, pressure: 160 bar, Equipment: documentation/manual, BÜHLER GDM H-400B Version 6.0 – 460T Complete die casting cell for aluminum with automatic mold spraying and automatic pouring ladle Manufacturer BÜHLER Model GDM H-400B Version 6.0 Year of manufacture 1996 Condition The machine is complete, in good working order, and has been regularly operated. It can be inspected while running after prior arrangement of a viewing date. Description We offer for sale a complete aluminum die casting cell based on the renowned BÜHLER GDM H-400B Version 6.0 injection molding machine with a clamping force of 460 tons. BÜHLER has been recognized for many years as one of the most reputable manufacturers of die casting machines in the world. The GDM H-400B model is a proven design, known for its high durability, precision, and low operating costs. The machine offered is sold as a complete production cell including an injection molding machine, an automatic mold spraying system, and an automatic pouring ladle. This configuration allows for efficient and repeatable production of aluminum castings. The offer includes: Die casting machine BÜHLER GDM H-400B Version 6.0 Year of manufacture: 1996 Clamping force: 4600 kN (460 tons) DATACESS control Complete control cabinet Technical documentation Automatic mold spraying system ACHESON Dog1000FCT.1S-A Year of manufacture: 2000 Automatic lubrication and mold cooling Power supply: 3 × 400 V Control: 24 V DC The system ensures uniform application of the release agent, improves the surface quality of the castings, and reduces the production cycle time. Automatic pouring ladle Equipped with: Siemens SIMATIC HMI Touch control The unit automatically picks up molten metal from the furnace and dispenses the appropriate amount of aluminum into the injection chamber, ensuring high process repeatability and reducing material losses. Technical data of the injection molding machine Clamping unit Clamping force: 4600 kN Second-stage clamping force: 180–420 kN Moving platen stroke: 640 mm Ejector force: 240 kN Ejector stroke: 145 mm Mounting plates Fixed platen: 990 × 1165 mm Moving platen: 990 × 990 mm Distance between columns: 640 × 640 mm Column diameter: 120 mm Molds Minimum mold height: 250 mm Maximum mold height: 780 mm Injection unit Piston stroke: 480 mm Effective piston stroke: 455 mm Available piston diameters: 60–110 mm Maximum aluminum casting weight: up to 8.5 kg Maximum injection pressure: up to 1485 bar Hydraulic system Maximum working pressure: 160 bar Oil tank capacity: 850 liters Electrical parameters Connected power: 31.5 kW Protection class: IP55 Dimensions Footprint: 7.5 × 2.4 m Height: 2.5 m Weight: 16,600 kg Key advantages ✔ Renowned BÜHLER brand ✔ Clamping force of 460 tons ✔ Complete production cell ✔ Automatic ACHESON mold spraying ✔ Automatic pouring ladle ✔ Siemens SIMATIC HMI control ✔ Complete technical documentation ✔ High production efficiency and repeatability ✔ Possibility of producing medium and large aluminum castings Application The machine was operated in a production facility and is offered as a complete workstation. It can be inspected and its technical condition verified after prior arrangement of a viewing date. Availability Crsdpfx Aozg E Rfskqsf The machine is available immediately. Loading and transportation arrangements can be made within Poland and throughout Europe.

Condition: used, Year of construction: 1994, closing pressure 600 kN Cjdjtuxmyspfx Akqsrf clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm Codpfx Aevxlufskqjrf capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm Crodpjvfhrtjfx Akqsf height of form 300-700 mm column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2093249C, total height: 1,050 mm, total width: 680 mm, input voltage: 400 V, power: 8 kW (10.88 HP), workpiece weight (max.): 175 kg, pressure: 2 bar, input frequency: 50 Hz, Professional, floor-standing Schultheiss VPC 055 / 400 Sp induction vacuum pressure casting machine. Manufactured in Germany, this heavy-duty unit is designed for large-volume, high-capacity jewelry production and industrial casting components where absolute speed and thermal stability are required. Equipped with a powerful 3-phase induction heating system and a digital West 6100+ temperature controller, it delivers rapid melting cycles and superb alloy homogeneity through an integrated mixing booster effect. Key Features: - Industrial Capacity: Equipped with a large crucible capacity, optimized for production-level batches. - 3-Phase Power System: 400V supply guarantees rapid melting times and consistent duty cycles. - Advanced Digital Monitoring: Integrated West 6100+ precision controller for exact thermal management. - Precision Vacuum & Pressure: Excellent fill rates for incredibly fine filigree details or heavy solid trees. Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 055 / 400 Sp - Year of Manufacture: 2009 Cedpsy Tbigsfx Akqorf - Serial Number: 2093249C - Voltage: 400V / 50Hz (3-Phase) - Power: 11 kVA / 16 A (approx. 8 kW active power) - Max. Temperature: 1,450°C - Casting Pressure: Up to 2.0 bar - Condition: Great condition, fully functional, clean casting assembly, and clear interface controls. VPC 066

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm Crodofrvzvspfx Akqjf capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute Codpfxoyzt D Ee Akqorf 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal Codpfx Aox Hp E Aokqorf 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN Cjdpfx Aeiu Smbskqorf height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10306675, type of input current: three-phase, input voltage: 400 V, clamping force: 8,400 kN, input frequency: 50 Hz, Horizontal die casting machine Manufacturer: Bühler, Model: SC D/84, Year: 1999 Serial number: 10306675 Cedpfx Aksynh Dlsqorf Max. locking force: 8,400 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Including Gerlieva GS 1200/1400Z mould spraying unit Including Westomat W900SLDG 900kg holding furnace Including ABB IRS5 45kg extraction robot

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 10499123, clearance between the columns: 780 mm, column diameter: 150 mm, ejector force: 225,000 N, ejector stroke: 175 mm, mold height (min.): 360 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 6,615 kN, input frequency: 50 Hz, Horizontal Die Casting Machine Make: Bühler, Model: GKS EVO B66D, Year: 2011 Serial number: 10499123 Mold height: 360 - 900 mm Mold opening stroke: 800 mm Max. surface pressure: 100 N/mm² Min. clamping dimensions: 620 x 620 mm Clear tie bar distance: 780 x 780 mm Tie bar diameter: 150 mm Ejector stroke: 175 mm Ejector force: 150 kN Max. clamping force: 6615 kN Cycle time: 30 s Plunger speed: 5.0 m/s Crsdpfjynhzksx Akqof Incl. mold spraying unit Gerlieva GS 1000/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB4400

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 10298440, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, input frequency: 50 Hz, Horizontal die casting machine Crodpfeyngyfex Akqef Make: Bühler, Model: SC D/42, Year: 1998, Serial number: 10298440 Mold height: 300 - 750 mm Mold opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping dimensions: 500 x 500 mm Clear tie bar distance: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. clamping force: 4200 kN Cycle time: 30 s Plunger speed: 5.0 m/s Incl. die spraying unit Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB BUHL ROB 46002004

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Codeyngv Topfx Akqjrf Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: like new (used), Year of construction: 1995, machine/vehicle number: 10262342, Automated high pressure die casting machine Bühler. 9800 kN clamping force. Credpfx Aofbl Enekqsf Machine is DISMANTLED

Condition: used, Year of construction: 1997, functionality: fully functional, clearance between the columns: 579 mm, casting force: 350 N, stroke length: 420 mm, column diameter: 125 mm, overall weight: 12,000 kg, power: 22 kW (29.91 HP), Locking Force: 350 metric tons Codpjv D Dwpefx Akqsrf Tie Bar Diameter: 125 mm Clearance Between Tie Bars: 579 x 579 mm Die Thickness (Minimum - Maximum): 300 - 700 mm Die Stroke: 420 mm Moving Platen Size: 940 x 940 mm Injection Position: -125 mm Power Requirement: 22 kW Machine Weight: 11,974 kg (26,400 pounds) Sold with trimming press and manipulator.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) Cedpfofbl E Ssx Akqorf The machine is DISMANTLED. Has been repainted recently.

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Crsdpfx Akjyhznhoqof Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Crsdpfxjyhzpls Akqof Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!