Used Güntner Condenser for sale (967)

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 11 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, New Kaeser Aircenter SM 16 - 11 bar screw compressor with integrated refrigerant dryer and compressed air tank Sigma Control 3 Year of manufacture: 2026 Operating hours: 0 Pressure: 11 bar Hjdpfszizi Nex Af Henp Nominal power: 7 kW + 0.49 kW Noise level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters capacity Refrigerant dryer dew point: +3°C Electronic level-controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 630 x 1220 x 1720 mm Weight: 440 kg Cgobpqyozizhlsb E Dow Option: K1 and T2

Condition: new, Year of construction: 2026, functionality: fully functional, New Kaeser Aircenter SM 16 - 11 bar screw compressor with integrated refrigerant dryer and compressed air tank Sigma Control 3 Year of manufacture: 2026 Operating hours: 0 Pressure: 11 bar Rated power: 9 kW + 0.49 kW Volume flow rate: 1.61 m³/min Noise level: 66 dB(A) Full load current: 24 A Compressed air outlet: 3/4" Compressed air tank: 270 liters capacity Refrigerant dryer dew point: +3°C Electronic level-controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 630 x 1220 x 1720 mm Weight: 440 kg Hnsdjzizhljpfx Af Hsp Option: K1 and T2

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Hnodpfoywwrfjx Af Hep Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Year of construction: 2009, condition: used, Used machine environmentally friendly thanks to the use of R404A Energy savings due to rotary refrigerant compressor (20–30% more efficient than conventional piston type) Intelligent condensate drainage Maximum operating pressure: 13 bar Processed compressed air volume: 5,200 l/min, 7,312 m²/h Motor power: 1.58 kW, 230 V Maximum inlet temperature: 55°C Hjdpfxszk Nrhe Af Hsnp Dimensions: 557 x 460 x 789 mm Availability: short notice Storage location: Röllbach

Year of construction: 2015, condition: used, Used machine Year of manufacture: 2015 Equipment and technical data: - Suction capacity: 611 l/min - Delivery rate: 485 l/min (at 8 bar) - Motor: 4 kW / 400 V - Aggregate speed: 1437 rpm - Oil capacity in the crankcase: 0.9 l - Max. operating pressure: 10 bar Hedjzk Nqkepfx Af Hjnp - Tank capacity: 270 l - Number of cylinders: 2 - Sound pressure level: 83 dB(A) - with refrigerant dryer DK 985 Eco: - Volume flow at pressure dew point +3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - with automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Dimensions: 930 x 830 x 1840 mm Weight: 190 kg Availability: short-term Location: Röllbach

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Hnedpfx Afszhadcs Hsp Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate Hedpfx Ajzg Twasf Hjnp 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Weiss Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Hodpfx Aezg Tn Eof Honp Areas of application: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW, Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Hjdpfx Ajzg Tl Rjf Henp Test chamber dimensions (W x D x H1/H2): 1400x800x800/1020 mm Door opening dimensions (W x H): 1300x680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control over the entire working area, Ethernet connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Hnjdpfjzg Er Aox Af Hep Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Water-cooled climate chamber Volume in liters: 1500 Internal dimensions: height 1000 mm, width 1000 mm, depth 1500 mm External dimensions: height 2200 mm, width 1293 mm, depth 3400 mm Thermal testing Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5 °C to 1.5°C Climate testing, temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Hedpfx Aszgr Rrof Hsnp Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory Hjdsu T Hrvepfx Af Hsnp -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: excellent (used), Compressor AIRCRAFT ACS Duo – used – Galvanised tank, screw compressor, incl. refrigerated dryer, incl. condensate treatment unit, automatic condensate drain ----- Technical Data ----- Tank capacity: 2 x 100 litres, Filling performance: 360 litres, Max. pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Hsdpfx Ajwb Evtjf Honp Weight: 201 kg Quality Info: - fully cleaned - electrics checked - immediately ready for operation

Condition: new, - Exhibition machine - For continuous air demand and intermittent operation Electronic control for reliability and efficiency. Increased flexibility thanks to two compressed air tanks High-quality and expandable equipment. Smooth and quiet running. Can also be used in intermittent intermittent operation. DUO KK equipment with refrigeration dryer and fine filter as pre-filter before the refrigeration dryer Condensate conditioner for oil-water separation Automatic condensate drain. ----- Technical data ----- Tank size: 2 x 100 liters, Effective delivery volume approx. 380 liters, Maximum pressure: 10 bar, Motor: 4.0 kW, Hnjdpfx Afju R S A De Hsp Speed: 2,880 rpm, Sound pressure level: 65 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg - new exhibition machine -

Condition: not inspected (used), Bluhm Systems Marking Laser Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Hnjdpfx Afezgci Ee Hjp Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Hodpjzgbtiefx Af Hjnp Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Hnjdpszf Ibksfx Af Hjp Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough, installed as standard R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Hjdpfxjzfzame Af Hsnp Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Type: WT11-1000/40 For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Temperature Chamber We offer a Weiss temperature chamber here. Weiss temperature chamber, air-cooled with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature tests: Temperature range -70°C to +180°C Temporal temperature deviation in the center of the useful space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min Heat compensation max. 2750 W Feedthrough integrated in the standard configuration R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert shelf 50 kg Total load of the shelf supports 100 kg Data for operation: Test chamber lighting Halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation of water-cooled test cabinets max. heat dissipation to the environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Type: WT11-1000/70/5 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Hnsdpszfy Rwsfx Af Hsp Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the telephone.

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Hodoxlkg Aepfx Af Hjnp Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Replaceable coater Hjdpfx Aezd Tt Aef Honp Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5 m/s Large line detection: 25 m/s Build volume: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2020, condition: ready for operation (used), A Guggenberger chamber washing machine is available. Number of wash carts: 8, wash cart capacity: 8 pallets, pallet dimensions X/Y/Z: 1200mm/800mm/160mm, spray pump power: 11kW, fan capacity: 4000m³/h, operating hours: approx. 4350h. Including rotary nozzles, spin drying unit, tilting device, exhaust fan with steam damper, condensate separator, gloss drying, tank heating with booster, compact belt filter system, oil skimmer and steam condensator. Documentation available. An on-site inspection is possible. Hnodpfozlt N Hsx Af Hop

Condition: excellent (used), Here we offer a Feutron climate test chamber. Hnsdpfjzd Sdgex Af Hsp Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Hnjdsy T Iyfepfx Af Hsp

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Hjdpfszd Rzwox Af Hjnp Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level: