Used Gasoline Injector Test Bench for sale (12,980)

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Credpszd Ultofx Apbeh Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Credpjzii A Refx Apbsh Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Csdszqzplepfx Apberh Type: S 3000 Evolo Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz Crodpezpv Iasfx Apbeh CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crodszpw Hdjpfx Apboh Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Serial number: 210141 – Year of purchase: 2022 Crodozmxqrspfx Apboh The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: excellent (used), Vötsch Temperature Shock Testing Chamber Type: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a two-chamber temperature shock testing chamber from Vötsch, designed for rapid temperature change tests. Suitable for industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: Hot Chamber: +50 °C to +220 °C Cold Chamber: -80 °C to +70 °C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate, hot chamber: approx. 11 K/min Heating rate, cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Test Chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant: R404A: 2.9 kg R23: 1.27 kg Pressure Data: ND max.: 22.5 bar HD max.: 25 bar Dimensions: approx. 930 x 2115 x 1970 mm Weight: approx. 1000 kg Equipment: Two-chamber shock testing system Digital control Program operation Observation window Cable entry Condition: Used Optical condition as shown in the pictures Normal storage and usage marks present Scope of delivery: Vötsch VT 7012 S2 temperature shock testing chamber Accessories as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Crsdpfx Asy Iyuwepbjh Subject to changes, errors and prior sale. We are happy to answer any further questions by phone.

Condition: excellent (used), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature control of the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Credjzd R Azepfx Apbsh Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: HT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Side feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) Csdpfezd R Tgox Apbjrh (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), Here, we offer a shock test chamber. Water-cooled temperature shock test chamber Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Codpozd R Uwjfx Apbjrh Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -65°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Type: HT 7012 S2 Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climate test chamber Technical data: Crjdpozd Sdmofx Apbeh Nominal volume of test chamber: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width 2000 mm, height 1000 mm Viewing window, heated, 2 pieces, width 500 mm, height 600 mm Feed-through opening, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, time-dependent ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 % RH Humidity difference, time-dependent ≤ ± 3.0 % RH Dew point range, intermittently up to -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators Here we offer a temperature test chamber. Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 in an empty test chamber Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm Cedpfx Aezd Sfqjpberh External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop Codpfx Aezdcmtepberh -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR Cedpjzdcmyefx Apberh All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Crodpfszgbmiex Apbeh Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants that comply with legal regulations Cjdpfx Apozdtdhjborh 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Cjdpozgr Eiofx Apbjrh Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1989, input - primarily 400 V three phases Crjdpfecw Twpox Apbeh output - secondarily reversible - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases power 50 KVA space requirements width - 800 x depth - 400 x height - 2,000 mm weight approx. 430 kg

Condition: new, Tool grinding machine Manufacturer: OPTigrind Model: GH 20 T Art. No.: 3100125 Condition: New machine Speed: 5,000 rpm Clamping range: 1 - 12 mm Standard equipment: - Collets 385E, sizes 4 / 6 / 8 / 10 / 12 mm Crsdpfoc I Tzvox Apboh - Corundum cup grinding wheel - Diamond cup grinding wheel - Device for re-grinding turning tools - Device for re-grinding shank milling cutters - Device for re-grinding twist drills - Operating manual

Condition: used, total surface approx. 33,54 m² Crjdpfx Aec S R H Nspbsh 6 plates 2,000 x 1,290 mm width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Condition: new, Year of construction: 2026, CORMAK W16 Bench Drill Press for Metal with Tapping Function – Precise and Reliable Drilling Machine The CORMAK W16 metal bench drill press is a precise and reliable column drilling machine equipped with a tapping function. Designed for professional applications, it is suitable for locksmith workshops as well as industrial production lines. The integrated spindle rotation direction change system makes it an ideal solution for both drilling and internal thread cutting operations. Main advantages of the machine Credpfx Aporif Iuebeh Tapping function with automatic spindle rotation reversal – provides full control over the process without the need for manual gear changes. Manual rotation direction change using a foot lever – allows precise tool retraction during special operations. High spindle rigidity – ensures accurate holes even during long operating cycles. Adjustable drilling/tapping depth setting – protects against exceeding the specified technological parameters. Tilting and rotating worktable – adjustment of ±45° horizontally and full 360° rotation around the column. Belt drive system – ensures quiet operation and reduced vibration. Built-in overload protection – safety limit switch installed in the belt transmission guard. Construction and technology The CORMAK W16 column drill press is based on a highly rigid cast iron construction, ensuring stable operation even with maximum quill extension. The spindle with an MK2 taper provides compatibility with a wide range of tools. The belt drive system offers five speed ranges (480–4100 rpm), allowing precise adjustment of operating parameters to the properties of the processed material. Precision and work efficiency Thanks to the 100 mm spindle quill stroke and adjustable drilling depth, the operator has full control over every stage of machining. The integrated tapping function makes the W16 a versatile machine for both drilling and thread cutting while maintaining high repeatability. The spindle speeds have been selected to provide optimal efficiency for drilling holes and producing metric threads in materials with different hardness levels. Applications The CORMAK W16 metal bench drill press is an ideal solution for: mechanical workshops and tool rooms, maintenance departments, assembly and production lines, technical schools and training centres. The machine is suitable wherever a precise drill press with tapping capability is required for machining steel, aluminium and engineering plastics. Standard equipment Self-locking B18 drill chuck MK2 drill chuck arbor Foot lever for changing rotation direction Belt transmission guard with limit switch Technical specifications Parameter Value Maximum drilling diameter 16 mm Spindle quill stroke 100 mm Spindle taper MK2 Spindle speed range 480 / 800 / 1400 / 2440 / 4100 rpm Spindle axis-to-column distance 193 mm Table dimensions 200 × 230 mm T-slots (table/base) 18 mm / 14 mm Base dimensions 528 × 360 mm Maximum spindle-to-table distance 315 mm Maximum spindle-to-base distance 556 mm Horizontal table rotation range ±45° Table rotation around column 360° Motor power 750 W / 400 V Weight 90 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Cjdpfx Aporwl Nnjborh Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm Codpfsrwmbgox Apbjrh - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm Crsdjvh Nbbopfx Apbeh total power requirement 0,37 kW

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Csdju Uiitspfx Apbjrh