Used Gea Cfs High Throughput Continuous Fryer for sale (25,751)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Lasdpfeyvrwtjx Aifod Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Lodpoy U Hriefx Aifjad

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes Lsdpfozka Ruox Aifead A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Laedpfoy Ry Hrox Aifsd Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (12 oz), manufactured in 2018. Machine designation: Paper Cup Machine (12 oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. (Country: Korea) Model: DSD-60A Serial number: 18-DS-0045 Year of manufacture: 2018 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. Laodezia U Djpfx Aifod If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We are offering this very well-maintained machine for the production of paper cups (8oz), manufactured in 2017. Lajdpsziau Dofx Aifed Machine designation: Paper Cup Machine (8oz) Manufacturer: DAE SUNG HIGH TECH CO., LTD. Model: DSD-60A Serial number: 17-DS-0027_INTERPACK Year of manufacture: 2017 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Model Gral 300 Total contents 300 litre Jacketed bowl with trolley Useful contents 1/2 tot 2/3 Power of mixer motor 16 -24 kW- double speed Rotation speed mixer arm I speed : 120 - II speed : 185 rpm Power of chopper motor 7- 9 kW – double speed dahlander Rotation speed chopper arm I speed : 1297 - II speed : 2524 rpm Hydraulic motor 1,5 kW Bowl Doubel wall jackted suited for heating and cooling Laodegn Ehaspfx Aifod Dimensions Height 2.900 mm Depth 1.600 mm (without valve) Width 1200 mm ALL PRODUCT CONTACT PARTS AISI 316

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Laodpfx Aiszb Nvisfed Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Part Number: 12509184 Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Location: Kusel

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, RESERVED 12 months warranty, in stock, available for immediate delivery, in excellent condition Resistance-heated system with a gas-tight furnace chamber suitable for hardening, brazing, sintering, annealing, ashing and preheating. -Tmax 800°C -Rod program controller SE-402 -3-zone heating -Gassing system -Max. gas operating pressure 7 mbar -Gas circulation -Gassing system, vacuum-tight -Gas purging system -Vacuum system -Note: no safety package installed! -Inner chamber dimensions WxDxH 580x830x1500 mm (special length) -Chamber volume approx. 722 liters -Max. load weight approx. 1000 kg -Two-stage rapid cooling with frequency converter -Burner with flame monitoring -Automatic shutdown / emergency purging in case of flame failure, not in case of power failure! -Sight glass DN150 -Max. gas operating pressure 7 mbar -Power supply 400V, 3 phases, N, PE -Heating power 70 kVA -Rated current 3x97A -Weight 1900 kg -Outer oven dimensions WxHxD 1700x1950x2750 mm -Control cabinet dimensions WxDxH 510x1360x500 mm -Operating manual, wiring diagrams, CE declaration The furnace is offered as refurbished. Electrically tested, including test reports. Inspection in our warehouse by appointment! Lajdpfxeyxlwre Aifod The furnace is not suitable for gas nitriding with NH2/ammonia! Furnace, furnaces, industrial furnace, melting furnace, annealing furnace, heat treatment furnace, sintering furnace, protective gas furnace, tempering furnace, hardening furnace, chamber furnace, brazing furnace, debinding furnace, dewaxing furnace, stress-relieving furnace, vacuum furnace, protective gas furnace.

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 Lajdpoy Nmy Aefx Aifjd condition: Very Good condition Available: Immediately

Condition: good (used), Item: NO-2003-Dairy-Cheeseplant Complete Dairy Cheese Plant Consisting of: - 3 pc Damrow Double-O cheese vats volume 12.000 liter. 2650 x 4000 x H 3150 mm - 1 pc Gadan Prepress unit with cutting and filling curd to moulds. 2200 x 10.000 x H 2600 mm - 1 pc Gadan Final Cheese Press with moulds 280X340 mm 2700 x 9300 x H 1800 mm - 1 press stand for pre-presser 3100 x 3900 x H 3700 mm - 1 intermediate station 2200 x 2700 x H 3150 mm - 1 pc Unit to take out cheese from moulds. 550 x 2150 x H 1400 mm - 1 end station 1600 x 3260 x H 2750 mm Lasdpfxjkzk Dds Aifod Equipment has been running until week 10 and will be dismantled starting week 16-17 Can also supply Brine system. We can dismantle and pack complete plant in Container/Trucks See attached pictures and video

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Equipped with a loading device. Laodpozmwk Rjfx Aifed Please let me know if you are interested.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 302/0252, Used CFS CUTMASTER cutter from 2010. For videos and more information, please contact me. Lsdpozaaw Uefx Aifoad

Condition: good (used), Year of construction: 2005, GEA Niro NS2006P piston homogeniser Lsdpew Ulcrsfx Aifsad Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

Condition: excellent (used), Year of construction: 2016, GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares Laodpfx Aiew Ulc Eefed

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Laodpfeyk Hlysx Aifjd

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, GEA KOPPENS PRF 600 PerFormer | Plate former for burgers, nuggets, and convenience food products Manufacturer: GEA Koppens / Convenience Food Systems (CFS) Laodpfxjzkv Nms Aifsd Model / Type: PRF 600 PerFormer Serial number: 712 Year of manufacture: 2001 Power supply: 400 V | 50 Hz | 3 Ph | 60 A Power: 30 kW Working width of the belt: 600 mm Machine weight: 2850 kg The GEA Koppens PRF 600 PerFormer is a high-performance, industrial plate former designed for use in automated production lines in the meat, fish, convenience food, and vegetarian industries. This machine is an industry standard, dedicated to the precise shaping of products such as burgers, nuggets, meatballs, fish sticks, and cutlets. Thanks to its advanced raw material distribution system, the former guarantees perfect consistency in weight and preserves the fiber structure of the processed material. The core of the machine is a proven plate forming mechanism with a working width of 600 mm, which works in conjunction with a large loading hopper, enabling the achievement of the highest production rates required in industrial processing plants. The operation of the PerFormer former is characterized by minimal raw material loss and a uniform compaction level of the final product, which directly translates into optimized production costs.

Condition: good (used), CSF Fryer Model BRN 3000 / 500 Lasdpfxexr Rugj Aifjd Terminal fluid heating system In everyday use Price € 10,950.00 We can organise shipping

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Ljdpfjv A Rppsx Aifoad Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm

Condition: used, Item: A-9600-GEA-APV-Evaporator Used Evaporator Ljdpfx Aiovi Razsfjad Price by GEA & APV (SPX) Capacity 7.000 L & 12.000 L Dismantled, moved to stock

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. Laedownx Ngjpfx Aifsd High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Lajdpfxey Rtlzo Aifod

Condition: used, Used GEA Westfalia model SC 6-01-576 stainless steel disc bowl separator. - Manufacturer: GEA Westfalia - Model: SC 6-01-576 - Permissible density of product to be treated: heavy liquid phase 1.1 kg/dm3 and solid phase 1.4 kg/dm3 - Maximum speed rated: 11.970 rpm. Lajdpfxezbucue Aifsd - Drive: flanged electricmotor with coupling 5.5 kW, 1740 rpm, 50 Hz, Ex II 2 G rating - Included: switchboard with control panel - Mounted on a skid

Condition: good (used), Height: 2700 mm Width: 1200 mm Length: 2400 mm Power supply: 400V 50Hz 3N Power: 31/40 kW Laodpfx Asrp Ezksifed Main material: stainless steel, acid-resistant Throat diameter: 200 mm

Year of construction: 1995, condition: good (used), Item: M-2068-Collette-CVC50 Mixer and aerator unit Manufacturer: Collette (GEA) Model: Converticoll CVC 50 Lasdpfoh Dbvtox Aifed Year of manufacture: 1995 For mixing and aerating dairy or confectionery products.