Used Grid Resistance, U03 for sale (3,448)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Tjdpfx Aljz Dmn Rs Aoc Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: excellent (used), L-Sealer with Shrink Tunnel For sale is a professional, semi-automatic L-sealer with an integrated shrink tunnel from the quality Italian manufacturer Pactur. It is ideally suited for the fast, professional shrink-wrapping of cardboard boxes, books, bottles, textiles, and other packaged items. The Ladypack 80/SI model is distinguished by its exceptional flexibility and very large sealing frame. It combines the sealing and shrinking processes into a single, compact, mobile unit, saving a significant amount of space on the production floor. Impulse Sealing System: The L-sealer operates using a Teflon-coated sealing wire. It produces clean, extremely strong seals without generating smoke. Efficient Shrink Tunnel: The integrated tunnel features a closed-loop air circulation system with adjustable air deflectors. This ensures perfectly uniform heat distribution and a flawlessly smooth shrink finish—even with complex product shapes. Precise Digital Control: The clear control panel allows for exact adjustment of sealing time, sealing wire cooling time, and tunnel temperature to match the specific film thickness and type (PO, PE, or PVC) being used. Heavy-Duty Conveyor Belt: The tunnel is equipped with a durable, heat-resistant metal mesh conveyor belt. It reliably transports even heavy items (e.g., printed materials, canned goods, or wooden components). Ergonomic Infeed Table: The separate, mobile preparation table allows for quick and easy insertion of products into the center-folded film. The film roll unwinds smoothly on ball bearings. Ideally suited for print shops, logistics centers, laundries, or contract packers for shrink-wrapping: - Cartons and multipacks - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle packs and cans Technical Specifications & Features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 Series Type: L-sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packages) Control system: Digital control unit for precise adjustment of sealing time and tunnel temperature Conveyor: Robust, heat-resistant metal mesh belt in the shrink tunnel Mains voltage: 380 V / 3-phase Max. power consumption: 11.5 kW Mobility: Entire system and the separate infeed table are mounted on sturdy swivel casters Max. film roll width: 700 mm Max. film roll diameter: Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (determined by the tunnel opening height) Tsdpfx Alsz Dtf Ae Aec Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 Todpfx Aswnhccel Ajc - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 64,900 km, power: 109 kW (148.20 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,600 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial customers. Internal ID number: [3398] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery Tedpfezc Dn Nex Al Aoc * Financing possible, even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * Immediately ready for use * Accident-free * High and long * Trailer hitch up to 3,500 kg possible * Reinforced springs * Rear-view camera * Automatic climate control * Bluetooth multimedia system * Navigation system * Cruise control * LED daytime running lights * Metallic paint * Alloy wheels * Chrome package * Comfort equipment * 3 seats Special equipment: Storage compartment in the roof lining of the driver's cab, dashboard "Techno", exterior mirrors electrically adjustable and heated, cruise control system including speed limiter, rear wing doors with glazing, heated rear window, infotainment system: UConnect with CD and MP3 player, with navigation unit, automatic climate control, upholstered headrests, black radiator grille frame, cargo area partition with window, light alloy wheels 6x16 (V-spoke), metallic paint, smoker's package, full-size spare wheel (including spare wheel holder), headlight surround black, sliding door load/passenger compartment right with glazing, seats in the driver's cab: double passenger seat, bumpers in vehicle color, daytime running lights LED, rear-view camera, tinted glazing, decorative strip front bumper in aluminum look Other equipment: Driver's airbag, turn signals integrated into the exterior mirror, brake assistant, body/structure: high-roof box van standard, body variant: high roof, crankcase ventilation heated, cargo area partition (grid) behind the driver, steering column (steering wheel) adjustable, engine 2.3 L - 109 kW JTD CAT, wheelbase 3450 mm, tire repair kit, low emission according to exhaust standard Euro 5, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: passenger seat adjustable with armrest and lumbar support, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: driver's seat with armrest and lumbar support, water sensor fuel filter, oil level sensor. ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only for the general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or by written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 114,880 km, power: 55 kW (74.78 HP), first registration: 02/2016, fuel type: diesel, overall weight: 1,945 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 4,380 mm, total width: 1,810 mm, total height: 1,862 mm, loading space length: 1,800 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0622. N506309 ----EQUIPMENT Todpfoz D N N Dsx Al Aoc * Exterior mirrors, electrically adjustable, heated and foldable * Trailer hitch with fixed ball head * Air conditioning with pollen filter * City Design Package 2 - 7-inch touchscreen - storage compartment (for double cab) - on-board computer - Connecting Box (Bluetooth hands-free system with USB port) + AUX input - parking assist system, acoustic, rear with reversing camera - radio, tri-tuner with MP3 * Partition, half-height, with grid, sound insulation and pass-through hatch * Transmission: 5-speed manual * ABS with electronic brake force distribution and mechanical brake assist * Storage compartment above the front seats * Airbag, driver side * Floor covering: plastic floor in the passenger compartment * Dome light in the cargo area * Rev counter * Three-point seatbelts * Electronic stability program (ESP) with traction control (ASR) * Speed limiter/cruise control * Headrests (3), front * Paintwork: solid color * Ladder rack * Steering wheel with height and reach adjustment * Headlight range adjustment, manual * Package: Electric - exterior mirrors, electrically adjustable and heated - front power windows with comfort operation - central locking with remote control * Package: Ergonomics - storage compartment between driver and passenger seat - driver's seat with height adjustment - storage compartment under the driver's seat * Particle filter: diesel particulate filter * Upholstery: fabric * Side protection strips, black * Power steering * Seat: passenger seat bench "Extenso" with folding table in the middle backrest incl. document holder * Seat: driver's seat with longitudinal and backrest adjustment * Doors: rear hinged doors, sheet metal * Doors: sliding door, right side * Lashing eyes, 6-fold in the cargo area * Immobilizer * Central locking with remote control - automatic door locking when driving - separate locking of the cargo area and driver's cab... and more. ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: excellent (used), mileage: 356,535 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 10x8, wheelbase: 7,200 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, traction control, - 4x4 - Aluminum fuel tank - Heated mirrors - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Media system - Rotating beacon - Rearview camera - Sun visor - Power take-off (PTO) - Central lubrication system Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 19,600 kg Payload: 30,400 kg GVW: 50,000 kg Functional Body brand: RHINO REAR DUMP TRUCK WITH FLAPS 24.5 M³ Dump truck: Rear Maintenance, history and condition APK (Technical Inspection): New TÜV certificate upon delivery Technical condition: very good Optical condition: very good Identification Registration number: 32-BNJ-7 MAN TGS 50.500 10x8 BLH WS + RHINO 24.5 M³ HARDOX REAR DUMP TRUCK First registration: 08.04.2019 Registration number: 32-BNJ-7 Mileage: 356,535 km Drive: 10x8 Power: 500 hp Transmission: Automatic Cab: Day cab MOT / APK valid until: 06-2027 Available: 2 identical vehicles For sale is an exceptionally robust and well-maintained MAN TGS 50.500 10x8 BLH WS 5-axle truck, equipped with a sturdy RHINO 24.5 m³ rear dump truck made of wear-resistant HARDOX steel. This vehicle was specifically designed for the most demanding operations in the construction, earthmoving and transport sectors. The powerful 500 hp engine, 10x8 drive, large wheels and hydraulically sprung and steered rear axles provide excellent traction, stability and maneuverability – even under difficult operating conditions. CHASSIS & DRIVE * MAN TGS 50.500 * Heavy-duty 5-axle chassis * 10x8 drive * 500 hp * Automatic transmission * Large wheels / heavy-duty off-road design * Rear axles hydraulically sprung * Rear axle hydraulically steered * Excellent traction on difficult terrain * Very good maneuverability despite 5-axle chassis * Central lubrication system * DIN mounting plate on the front of the vehicle * Rotating beacons RHINO 24.5 M³ HARDOX REAR DUMP TRUCK The vehicle is equipped with a very robust and heavy-duty RHINO rear dump truck. * Volume approx. 24.5 m³ * Rear tipping * Dump bed made of wear-resistant HARDOX steel * Very robust and durable construction * Aluminum cover flaps Tsdpfxjzzn Ehe Al Aoc * Suitable for intensive professional use * Suitable for heavy bulk goods * Ideal for earth, sand, stones, construction debris and other heavy materials The combination of the heavy-duty 10x8 chassis and the robust HARDOX dump bed makes this MAN particularly suitable for demanding earthmoving, construction and infrastructure work. CAB & EQUIPMENT * MAN day cab * Air conditioning * Automatic transmission * Comfortable...

Condition: new, power: 427 kW (580.56 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 68,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Air horn - Metallic paint - Particulate filter - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cabin - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Auxiliary heating system - Toolbox - Windshield Internal number for customer inquiries: 4-185 Chassis in stock -> Ready-to-use vehicle with timber platform body and loading crane from our stock selection within 3 weeks!!! MAN TGX 26.580 6x4 BL with short timber body & timber loading crane according to your specifications or from stock! Vehicle description: * Cab GM: the spacious (wide, long, medium height) * LED headlights * LED daytime running lights, fog lights, position lights and tail lights * Stone guard for headlights, coarse mesh * Protective roof for rear lights * Suspension leaf spring/air * Drive 6x4 * Wheelbase 4,500 mm + 1,350 mm * Tire size front 385/65R22.5, rear 315/80R22.5, trailer 315/80R22.5 * Engine D3876LF11 - 580 hp / 427 kW EURO 6d SCR 2900 Nm * MAN TipMatic 1230 OD, with retarder 35 * Differential lock in rear axle * Fuel tank aluminum 390l + 80l AdBlue * Trailer coupling ROCKINGER 500 G 6A * Central locking with remote control * Glass sunroof, electric * All exterior mirrors electrically adjustable and heated * Additional cab insulation, thermal and acoustic * Auxiliary heater * Air conditioning, Climatronic * Digital axle load display (ALM) in the cab for air-sprung axles * Display in instrument panel for trailer data (axle load) Tsdpfx Aszik Uzjl Aoc * Cool box under bunk, fully retractable * MAN EasyControl control panel, 4 functions, can be operated from the outside when the door is open: work lights, auxiliary drive, engine start/stop and hazard warning lights * High-performance engine brake MAN EVBec, steppable * MAN EasyStart hill start assist * Driver and co-driver comfort seats, air-sprung, with lumbar support, shoulder adjustment, heating and seat ventilation * Multifunction steering wheel, leather, adjustable height and tilt, with parking position * Front cooler protection, grid * Bumper, steel, 3-piece * 2 bunks * Storage compartment on the back of the cab with flexible gooseneck lamp, control module, alarm clock and charging station * MAN Media System Navigation Professional 12.3 inches * Navigation SD card EUROPE * Smartphone integration * Infotainment control MAN SmartSelect with touchpad and direct selection buttons * Lane departure warning LDW * Driver attention alert MAN AttentionGuard * GSR equipment: rear view camera, turning assistant, tire pressure monitoring, emergency braking assistant, etc. * and more Superstructure: PAVIC OPTIPA steel short timber body 6800mm loading length with aluminum front panel 4 OPTIPA SL timber bolsters with 8 OPTIPA AL10 aluminum frames Access ladders Toolbox and more Loading crane: according to your choice: Palfinger Epsilon TZ15 9.8 or Palfinger Epsilon Q150Z 9.6 alternatively TajfunLIV 150Z 9.6 or TajfunLIV 150Z 9.6 cabin crane...

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm Tedpfx Aloy E Hyne Aoc saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft Tjdpfx Ajzk N Dwsl Aec - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. Todpfsvc Amtex Al Aoc The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW Tedpfsu Nzwujx Al Aec voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 280 mm, number of axes: 4, This 4-axis MORBIDELLI A644S FTP 41 PC was manufactured in 2015. It features an impressive X-axis travel of approximately 4,400–4,500 mm and Y-axis travel of approximately 1,350 mm. The machine is equipped with a CNC milling spindle and an automatic tool changer, ensuring efficient processing. If you are looking to get high-quality CNC processing capabilities, consider the MORBIDELLI A644S FTP 41 PC machine we have for sale. Contact us for further details. • Work table: Vacuum clamping system • Spindle: CNC milling spindle • Tool changer: Automatic Additional equipment Tsdpjz Dwawofx Al Asc • Vacuum pump: approx. 250 m³/h

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights QUICK HIGHLIGHTS ✔ Factory-New Mercedes-Benz Arocs 4140K 8x4 ✔ Genuine German MEILLER H436 Rear Tipper ✔ 20 m³ HARDOX 450 Steel Body ✔ Proven Mercedes-Benz OM460 EURO-3 Engine ✔ 394 HP | 1,900 Nm Torque ✔ Mercedes PowerShift 3 Automatic Transmission ✔ Heavy-Duty Mining & Construction Specification ✔ Cooling Package for Hot Climates ✔ Cyclone Dust Filtration System ✔ Ready for Immediate Worldwide Export Built for Maximum Uptime Every hour a truck stands still costs money. The Mercedes-Benz Arocs 4140K has been engineered to keep working in the world’s toughest operating environments. Whether transporting rock in a quarry, moving sand on construction sites or supporting large mining and infrastructure projects, this dump truck delivers the reliability, durability and productivity professional operators depend on every day. The heavy-duty 8x4 chassis, powerful Mercedes-Benz driveline and genuine German-built MEILLER tipper body are designed to perform under continuous heavy loads, both on- and off-road. Engineered for Mining, Quarry & Construction This is not a standard road truck fitted with a tipper body. The Arocs 4140K is a genuine construction truck built for demanding industries where reliability is essential. Its reinforced chassis, heavy-duty suspension and excellent ground clearance provide outstanding stability on uneven terrain, while the robust driveline ensures maximum traction under difficult working conditions. Ideal for: Mining Operations Quarry Projects Road Construction Earthmoving Infrastructure Development Aggregate Transport Sand & Gravel Transport Rock Transport Government Projects Municipal Works Proven Mercedes-Benz Power At the heart of the truck is the well-proven Mercedes-Benz OM460 12.8-litre inline six-cylinder EURO-3 diesel engine producing 394 HP and 1,900 Nm of torque. Combined with the Mercedes PowerShift 3 automatic transmission, this proven powertrain delivers smooth shifting, outstanding pulling power and dependable performance in demanding working environments. The EURO-3 engine is particularly appreciated throughout international export markets thanks to its reliability, straightforward maintenance and long service life. Built for Hot & Dusty Climates Many heavy-duty trucks perform well on the road. Few are specifically configured for extreme working environments. Todjy Rucuepfx Al Aoc This Arocs dumper is equipped with a cooling package for very hot regions, a construction-site air filtration system, an additional cyclone dust filter and a raised air intake behind the cab. These features help protect the engine and maintain performance when operating in dusty mines, desert regions and remote construction sites. Genuine German MEILLER H436 Tipper The original MEILLER H436 rear tipper body is one of the most respected tipper systems in the industry. With a generous 20 m³ capacity, an 8 mm HARDOX 450 wear-resistant steel floor and a heavy-duty hydraulic tipping system, it has been developed for intensive daily operation and long service life. Whether...

Condition: used, mileage: 730,000 km, power: 460 kW (625.43 HP), first registration: 08/2016, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Mercedes Benz Actros 1863 Flatbed with Tarp, Retarder, Full Air Suspension, Navigation, Camera, Tail Lift, Euro 6 For inquiries: 0926813 * Condition: very good * Engine power: 460 kW / 630 hp * Engine displacement: 15,569 ccm * Permissible total weight: 18,000 kg * Weight: 10,740 kg * AdBlue * Retarder * ABS * ASR * ESP * Differential lock, rear axle * Adaptive cruise control * Lane keeping assist * Storage compartment above driver / center / passenger * Audio system: CD radio (Bluetooth) * Navigation system * Rear view camera * Electric sunroof * Automatic climate control * Auxiliary heater * Air-suspended comfort seat for driver * Seat heating for driver * Emission standard EURO 6 * 2x bunk beds * Pull-out cooler box under the bed * Electrically adjustable and heated exterior mirrors * Stowage compartment on the outside, left * Suspension: Air / Air (Full Air) * Electric windows * Fog lights * Electrically extendable sun visor * Underrun protection * Additional headlights on the cab Tail lift: Dautel * Load capacity up to max. 1,500 kg * Year: 2016 Body: Refrigerated box * Manufacturer: Schwarzmüller * Wear-resistant wooden floor * Edscha tarp Load compartment length: 7,300 mm Load compartment width: 2,480 mm Load compartment height: 2,800 mm Tires: 1st axle: 385 / 55 R22.5 30%, air-suspended 2nd axle: 315 / 70 R22.5 20%, air-suspended Schwarzmüller PA 2/E Flatbed with Tarp, Through-Loading System Int. No. for inquiries: 0926812 * Condition: very good * Year of manufacture: 2016 * ABS * EBS * BPW axles * Through-loading system * Edscha tarp * 2-axle air suspension * Aluminum underrun protection Load compartment length: 7,250 mm Load compartment width: 2,480 mm Load compartment height: 2,770 mm Tires: * Front axle: 385 / 55 R 22.5 air-suspended / 35% Todpfsz Ec Nysx Al Aoc * Rear axle: 385 / 55 R 22.5 air-suspended / 35% ----Price: EUR 39,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale are reserved.

Condition: used, mileage: 35,834 km, power: 107 kW (145.48 HP), first registration: 12/2023, fuel type: diesel, overall weight: 4,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale are subject to change! Internal number: 1417.8757176 ----EQUIPMENT * GAMO conversion into a sales vehicle, including FRESH?MASTER 460 - AIRPLUS refrigerated display case - body in GAMO® sandwich construction, exterior and interior made of GRP (glass fiber reinforced plastic), corrosion-resistant, exterior: white - GELCOAT? surface coating, insulation with high-quality PU hard foam, edge and frame profiles made of aluminum, thermal bridge-free roof and body profiles, white RAL 9016 - adjustable roof ventilation, 2-component cast floor with flocking and sealing, driver's cab connection with passage door, sales flap on the right side in driving direction - REFRIGERATED DISPLAY CASE SYSTEM AIRPLUS? refrigerated display case, two-part stainless steel tub, circular brushed, approx. 4,500 x 785 mm display area, electronic control with hot gas defrosting, digital display, programmable defrost times, refrigeration unit, thermostat-controlled auxiliary fan, continuous, insulated under-counter refrigeration compartment with five openings for installing flaps or drawers, internal roller fans, the evaporator is directly accessible via the service flap - heated condensate tray under the evaporator - REAR WALL washing and hygiene area, hot water supply, double washbasin, under-counter boiler with knee switch, two canisters, refrigeration unit conversion, continuous wall worktop, wheel arch conversion - ELECTRICAL SYSTEM: 230V electrical basic installation with FR distribution box, RCD circuit breaker, fuse 16 amps up to max. 3.5 kW, FR light switch, two FR double sockets (2 at the counter, 1 under the worktop), CEE wall socket 230V/16A. DIMENSIONS: Internal dimensions: 4500x2320x2050mm LWH. External dimensions: 4900x2420x2720mm LWH * Renault air suspension rear axle - Goldschmitt auxiliary air suspension for rear axle * Exterior mirrors with extended arm for 2.35 m body width * Package: Sound & Climate DAB+ - air conditioning with pollen filter - radio MP3 DAB+ with integrated Bluetooth hands-free system * Interface for bodywork (CAN) * Seat: Driver's individual seat, height-adjustable - with lumbar support * Extended rear wiring harness * Pre-wiring for body electrical system * ABS with EBV and brake assist - with automatic activation of hazard warning lights during emergency braking * Storage compartment above the windshield * Airbag: Driver side * Trailer hitch * Exterior mirrors, electrically adjustable and heated * On-board computer * Tachometer * ESP with load detection and ASR - Electronic Stability Program with traction control including hill start assist and trailer stabilization * Power windows * Transmission: 6-speed manual transmission * Glove compartment, closed * Headrests - height-adjustable * Fuel tank 105 liters * LED daytime running lights * Paint: Solid color * Steering wheel adjustable in height * Light and rain sensor * Alternator 185 A Tedpfx Aloz Emqbj Aec * Engine: Start & Stop automatic ENERGY = Technology package to reduce consumption, including start-stop automatic and Energy Smart Management (ESM), a system for recovering braking energy * Pollen filter * Upholstery: Fabric "Kaleido" * Diesel particulate filter, self-cleaning * Side wind assist * Power steering * Seats: Driver's seat height adjustable * Seats: Suspended driver's seat - with lumbar support - with center armrest * Socket: 12V sockets on the dashboard (2 pieces) * Connection for engine information * Underrun protection front axle * Immobilizer, electronic * Ce

Condition: used, mileage: 633,000 km, power: 200 kW (271.92 HP), first registration: 10/2015, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, loading space length: 7,990 mm, loading space width: 2,490 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Benz Atego 1527 Flatbed with Sideboards, Euro 6 For inquiries: 0926825 * Condition: very good * Power: 200 kW / 270 hp * Engine displacement: 7,698 cc * AdBlue * ABS * ASR * ESP * Differential lock, rear axle * Audio system: CD radio (Bluetooth) * Roof hatch, mechanical * Driver's seat, comfort suspension seat * Sun visor, exterior, transparent * Rotating beacons on the roof * Emission standard: EURO 6 * Axle configuration: 4x2 * Exterior mirrors, electrically adjustable and heated * Suspension: leaf spring / air * Power windows * Underrun protection * Storage box, left side / plastic * Storage box, right side / plastic Body: Flatbed * Sideboards * Wear-resistant wooden floor Tjdoz Ewv Ijpfx Al Aoc Dimensions (cargo space/loading area) Cargo space length: 7,990 mm Cargo space width: 2,490 mm Cargo space height: 600 mm Tires: Front axle: 305 / 70 R 19.5, 30% leaf-sprung Rear axle: 305 / 70 R 19.5, 30% air-sprung ----Price: €19,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors, and prior sale are subject to change.

Condition: new, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting - Wall or free-standing installation possible Tsdpeu Nhbysfx Al Asc - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 09/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 18-inch TWIN-MONOTUBE-DESIGN rims, satin matte black * MAN TGE raised suspension * Hill start assist * Exhaust system, EU6e (EC) * Trailer coupling, fixed * One towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling to the side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirror on the left, convex, with integrated LED turn signal and wide-angle view * Exterior mirror on the right, convex, with integrated LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist * Battery 520 A (92 Ah) * Rubber flooring in the cab * Electronic parking brake * AGM battery (520 A, 92 Ah) and generator * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Stone chip protection (without CO2 optimization) * High roof, painted in vehicle color * Differential lock on the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Park steering assistant with parking assistance incl. side protection * Grab handles at the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights and coming and leaving home function * Electrical connection block and KFG with ABH programming * Premium interior noise reduction measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, assembly 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable flap, illuminated * Rear wing doors without window cutouts * Air conditioning "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Panel van * Child safety lock, electrically operated * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant "Light Assist" * Leather multifunction steering wheel, heated with Tiptronic * Left-hand traffic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Attention and fatigue detection system * MAN SmartLink * 4-cylinder turbo diesel engine 2.0 l / 130 kW (4V) BIT, Common-Rail * Basic engine is: TK1/TK4 * Fog lights incl. cornering light * MAN Connect * MAN Media Van Navigation Business (12.9 inches) * 12V socket, cup holder * Tire pressure monitoring system * Standard wheelbase 3,640 mm * Three-point automatic seatbelts with height adjustment * Rear wing doors with increased opening angle * Heat-insulating glazing * 12V socket in the cab * Swivel seat left * Swivel seat right * Seatbelt warning, E-contact in the seatbelt buckle, driver and passenger seat * Seat covers in fabric "Toronto Grid" * Seat heating for driver and passenger seat, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assistant * Engine start, standard * Side wind assistant * Windshield wiper interval control with light and rain sensor * LNFZ version with up to 3 seats * Keyless Go with SAFELOCK Tedpfxez Ed N Ue Al Ajc * Blind spot detection on both sides and departure warning * Turning assistant * Emergency assistant (active lane keeping assistant, emergency assist, and traffic jam assistant) * Preparation for alcohol interlock * Intelligent speed assistant * With multifunction camera * Digi

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - 8 lashing points - Approach angle 16° - Loading flap Net price: €2,899.16 / Gross price: €3,450.00 Article number: MBA227261500.01 Technical data: • Brand: Martz • Model: BAU-3 260/2 S • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 260 x 150 x 25 cm • External dimensions (L x W x H): 460 x 210 x 164 cm • Loading height of the floor: 34 cm • Permissible total weight: 2,700 kg • Unladen weight: 522 kg • Payload: 2,178 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed wood floor, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading flap mounted on a shaft • Stable eccentric locks • Option to insert accessories at all 4 corners for tarpaulin frames, grid attachments, sideboards or front panel extensions • Robust support feet on the loading flap • Lifting aid for the loading flap • Very low chassis for a low approach angle • With bucket storage • 8 lashing points recessed in the frame profile (600dAN/kg), TÜV certified • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT overrun device and parking brake • Very stable bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-sized safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Todpex Tbkkjfx Al Asc 46419 Isselburg Over 1,200 trailers available immediately! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function Features: - Tilting loading platform - 8 tie-down points - Universally applicable, sideboards can be retrofitted Net price: €2,092.44 / Gross price: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Unladen weight: 340 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wood floor, slip-resistant and waterproof • Option to insert at all 4 corners for grating attachment, sideboard attachment, or front wall extension • Sturdy eccentric locking mechanisms for securing the loading platform • Very low chassis for a shallow loading angle • Tilting loading platform, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 tie-down points recessed in the side frame profile • Reverse assist system • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Tsdpfxsx Tcfps Al Ajc Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 2009, operating hours: 2,133 h, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 100 mm, number of axes: 3, number of slots in tool magazine: 8, total height: 2,350 mm, table width: 4,500 mm, spindle motor power: 12,000 W, product length (max.): 6,000 mm, spindle speed (max.): 24,000 rpm, This 3-axis FORMAT4 PROFIT H22 was manufactured in 2009. It features a robust work table type with a pod and rail vacuum bed, equipped with 6 moveable support rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking to get high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT H22 machine we have for sale. Contact us for further details. - Voltage (V): 400.0 V- Frequency (HZ): 50.0 Hz- Phase (PH): 3.0- Power (KW): 18.0 kW- Duty Cycle: S6-40%- Current (A): 36.0 A- Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups- Tool Changer: Linear rack tool changer mounted under the gantry rail plus additional pick-up/aggregate station Included Equipment: Tedpez Hk I Hefx Al Ajc Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking

Condition: good (used), mileage: 130,465 km, power: 265 kW (360.30 HP), first registration: 03/2013, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, Year of construction: 2013, Equipment: AdBlue, Bluetooth, EBS, air conditioning, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - EPS - Low noise - Tipping hydraulics - Particle filter - Radio/CD player - Sunroof - Side door - Toolbox = Further Information = Suspension: Leaf spring Front axle: Steerable Number of cylinders: 6 GVWR: 33,000 kg Crane: Fassi F155A0.22 Active, year of manufacture 2013, behind the cab Technical condition: good Optical condition: good Vehicle number: 123 Mercedes-Benz Actros 3336 / Tipper + Fassi F155 / Bordmatik / Euro 5 / 130,000 km .: WDB9321631L727408 Suspension: Leaf / Leaf Transmission: Semi-automatic Air conditioning Engine brake Cruise control Euro 5 130,000 km 2-sided tipper with Bordmatik system Crane: Brand: Fassi Type: F155A0.22 Year: 2013 Special equipment: Storage compartment on engine tunnel, trailer socket 15-pin 7+7-pin, audio system: CD radio (Bluetooth), exhaust pipe raised behind cab, exhaust pipe raised behind cab, variable, air horn, cab: cab entrance movable, cab: comfort suspension (1.8 Hz), transmission 16-speed, air filter: filter for construction site vehicles, air filter: enlarged paper air filter, parameterizable special module, sun visor, socket in cab 24V, stone guard grid, front bumper in steel design, warning sound for reverse gear, oil cooler for transmission Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer brake 2 - line, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirrors wide-angle and heated, left, outside temperature display, battery 165 Ah, roof hatch (steel), differential lock rear axle, cab: M (medium length), suspension: leaf / leaf, generator 80 A, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, fuel tank: 300 L, model upgrade from 06/2008, engine 12.0 L - 265 kW V6 Diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, rear window, disc brake front axle, seats in cab: driver's seat, sprung seat, standard, steel rims 9.00x22.5, Telligent - gearshift, drum brake rear axle, preparation for CB radio, preparation for telephone/fax, front axle straight, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 33.0 t No liability for printing and typographical errors, changes, prior sales and errors! = Company Information = No liability for printing and typographical errors, changes, prior sales and errors! Tedpsz Abhfofx Al Aoc Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, mileage: 55,691 km, power: 110 kW (149.56 HP), first registration: 09/2022, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, EQUIPMENT - Tow hitch: fixed - Exterior mirrors, electrically adjustable and heated - Co-driver's double seat bench on the right - On-board tools and jack - Electrical connection block - Suspension: reinforced rear suspension - Rear wing doors without windows - Rear wing door closure with release mechanism - High partition with fixed window (8 braces) - Air conditioning with manual control in the driver's cab - Multifunction display "Plus" - Navigation system DiscoverMedia incl. streaming and internet - Without child safety lock in the passenger compartment - ParkPilot in the front and rear area - ParkPilot in the rear area - Side panels, hardboard - Seat heating, left - Seat heating, front - Universal floor in the passenger/cargo area Tedszctqaopfx Al Aec - Lashing eyes for securing cargo, reinforced - Speakers (full-range) - Airbag for driver and co-driver - Exterior mirrors, electrically adjustable and heated - Exterior mirrors, left and right, convex - Hill start assist - Brake light, third - Tinted glass, green - Tachometer - Three-point automatic seat belts - Electronic stability program - Suspension: 16" suspension with 16" brake system - Suspension: suspension and damping, standard - Power windows, electric (2) - Fresh air system with multi-stage fresh air - Transmission: 6-speed gearbox - Rubber floor covering in the driver's cab - Glove compartment with lockable flap - Rear tailgate without window - Heating and ventilation system in the driver's cab - Child safety lock, electrically operated - Headrests - Fuel tank with 70 l capacity - Paint: solid color - Headlamp range adjustment - Multi-collision brake - Non-smoker version - Upholstery: fabric, design "Double Grid" - Radio: digital radio reception - Diesel particulate filter and AdBlue system - Sliding door, right - Crosswind assist - Power steering, electromechanical - Start-stop system - Daytime running lights - Telephone: mobile phone interface - Lashing eyes for securing cargo - Immobilizer, electronic - Central locking with remote control and interior operation - Approved as a truck ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as part of the payment. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, mileage: 42,660 km, power: 130 kW (176.75 HP), first registration: 06/2025, fuel type: diesel, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Hill start assist * Exhaust system, EU6e (EA) * Tow hitch, fixed * Towing eye, front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swiveling, with wide-angle mirror on the front passenger side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, left and right, convex, with LED turn signal and wide-angle area * Front-wheel drive * Emergency brake assist (Front Assist) * Rubber floor covering in the cab * Wooden floor in the cargo compartment with wheel arch covers * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Operating voltage 12 V * Tie-down rails (airline) in the cargo compartment: side walls and stone chip protection (with CO2 optimization) * H3 - High roof, painted in body color * Springs and shock absorbers reinforced, stabilizer reinforced * Rear step, over half the width * Immobilizer, electronic * Parking assist (PDC), front and rear * Grab handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Preparation for tachograph (Smart TCO 2.0) with preparation for Toll Collect, with DSRC antenna * Daytime running lights with assist driving lights and coming and leaving home function * Electrical connection box and preparation for body and trailer coupling * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine, 2.0L, assembly 03N.G * Cruise control system * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Grab handle on the bulkhead in the cargo compartment * Manual air conditioning "Climatic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assist "Light Assist" * Leather multifunction steering wheel with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Driver alertness and fatigue detection system * MAN SmartLink * 130 kW (LD) * Fog lights incl. cornering lights * MAN Connect services incl. call services * MAN Media Van Navigation Business (12.9 inch) * 12 V socket, cup holder * Tire pressure monitoring system * L4 - Long * Three-point automatic seat belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V sockets in the cab (in the instrument panel and in the left seat frame) * Suspension seat "ergoComfort", left * Front passenger double seat bench, right, with storage compartment and foldable center backrest * Seat belt warning, front * Seat covers in fabric "Toronto Grid" * Seat heating for driver and front passenger seat, separately adjustable * Side paneling in the cargo compartment made of plywood, up to the roof frame * Side marker lights * 2 remote control keys Tsdpjz Htk Djfx Al Asc * Approved as 3.5t * Start-stop system with brake energy recovery * Side wind assist * Windshield wiper intermittent operation with light and rain sensor * Special purpose vehicle (SPV) version with up to 3 seats * Keyless Go * Sliding door, right * Cornering brake function * Lane keeping assist (Lane Assist) * Preparation for alcohol interlock * Speed limiter with predictive control * Multifunctional front camera * Digital radio reception (DAB+) * Front axle, reinforced *

Condition: new, table length 2400 mm Todpfxed Raw Aj Al Asc table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Price excludes packaging and shipping.