Used Hidroliksan Cfss 100 for sale (22,785)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Gbodpovf E Avsfx Abmsl Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Measuring gauge Gbsdpfx Abjy Ipbmomjl Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Gbedpfx Aoyvfkljbmol Model: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Pressing force: 100 t Working width: 3 m Weight approx.: 8 t Dimensions approx.: 3,600 x 1,600 x 2,600 mm

Condition: new, mileage: 10 km, power: 75 kW (101.97 HP), fuel type: diesel, overall weight: 2,040 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Pre-installation for trailer coupling Cargo area package: 4 lashing eyes, cargo area lighting Worksite package Cargo floor and side walls made of wood Comfort Connect package with Multiflex cabin Gbodpfx Asyz Hm Tsbmol Additional features: Passenger airbag, passenger airbag switchable, driver airbag, automatic headlight assist (Coming Home, Leaving Home), electrically adjustable and heated exterior mirrors, exterior mirrors with black covers, onboard computer, brake assist, rear parking assist, rear wing doors without windows, body/build: panel van, head airbag system, adjustable steering column (steering wheel), model update, engine 1.5 L - 75 kW Diesel FAP, payload 650 kg, electric parking brake, Peugeot Connect Box / SOS button (emergency call for vehicle location), wheelbase 2785 mm, tire pressure monitoring system, safety package, low emissions according to Euro 6e standard, gear shift indicator, Eco-LED headlights, right sliding door, SCR system (AdBlue technology), front side airbag, black side protection strips, seat cover/upholstery: Curitiba fabric, smartphone station, special paint Snow White / Kaolin White, start/stop system, automatic door unlocking (in case of accident) Errors, changes, and interim sales reserved. The equipment details listed in this advertisement do not represent guaranteed characteristics in the legal sense and serve solely for general information purposes. Binding specifications concerning features are exclusively part of the purchase contract.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Version: Temperature Shock Test Chamber Cooling unit: Water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and temperature cycling tests. For use in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Godpjy H Hk Ajfx Abmebl Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Precooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual display - 2-zone system - Transfer cart for rapid specimen transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Construction - Separate hot and cold chambers - Stainless steel test space - Industrial-grade construction Dimensions External: 2335 x 940 x 1820 mm Handling dimensions: 1990 x 940 x 1652 mm Internal: 410 x 480 x 660 mm Weight Approx. 950 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit and piping diagram - Spare parts list Service before delivery (optional) - Functional check - Refrigerant service - Leak test - Test run with log Condition Used. Cosmetic condition as shown in photos. Scope of Delivery - Test chamber TSS-70/350-A - Documentation (where available) Note Used machine, sale without warranty. Inspection can be arranged upon request. Loading and transport can be organized if required. Subject to prior sale and technical modifications. For any questions, please feel free to contact us.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers -OLEO hydraulic buffer -Type: 21 - M FS - 100 -Stroke: 150 mm -Piston rod: Ø 76mm -Dimensions: 151/151/H584 mm -Quantity: 3 hydraulic buffers available Gedpfxjd Subus Abmjbl Price: per piece -Weight: 18 kg

Condition: used, mileage: 532,000 km, power: 330 kW (448.67 HP), fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,600 mm, total width: 2,550 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electric window regulation, parking heater, power mirror, Year of manufacture: 2021 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle 1: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Rear axle 2: Lift axle; Tyre profile left: 100%; Tyre profile right: 100% Number of cylinders: 6 Engine capacity: 10.837 cc Empty weight: 9.625 kg Carrying capacity: 16.075 kg GVW: 25.700 kg = Additional options and accessories = - Air horn - Air suspension - Aluminium fuel tank - Flashing lights - Work lights - Hardwood omega floor - Heavy duty engine brake - Line assist - Lock diff - Outside temperature display - Parking air conditioning / roof air conditioning - Radio Gedpfx Ajy N A Hfebmjbl - Refrigerator - Sleeper cab - Toolbox stainless steel 2x - Vehicle heater - Visor = Remarks = Inside demension LxB 815 x250 cm

Condition: used, mileage: 100 km, power: 160 kW (217.54 HP), first registration: 12/2013, fuel type: electric, axle configuration: 4x2, wheelbase: 4,650 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, total length: 8,400 mm, total width: 2,550 mm, Year of construction: 2013, Tail lift: Dhollandia, 1500 kg = More information = Empty weight: 7.410 kg Carrying capacity: 4.590 kg GVW: 12.000 kg Technical condition: poor Visual appearance: good Registration number: 80-BDJ-6 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Gbsdpfeydcqljx Abmjl Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, net belt width ± 600 mm total electrical power 33 kW Gsdpoy Emtujfx Abmsbl thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Sourdough – Rapid Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 – 100 kg total rye flour with timer Stainless steel construction Connection: 400V, 16A CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Options: Delivery service Maintenance contract Service package Instruction & commissioning Gbodpfx Absvdkt Romel Many more bakery machines in stock!

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant Gbodpfx Ajy Hkgbebmol 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) Gbodpfx Abjy Hkfdomsl - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2013, operating hours: 10,000 h, Field of application: Construction Gbsdox Dmugepfx Abmjl Please contact Theo Lelie for more information Terex RT100 RT Rough Terrain Crane 4x4x4 Bj 2013 53 m Main Boom 90 ton / 3 m Cummins QSB 6.7 engine CE Declaration

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Gbsdpfsy Hkd Hox Abmel Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Gsdpfsy N R N Ujx Abmsbl Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material. Punch activation by hand lever, profile shear with foot pedal. Gedpfx Asy R N T Iebmjbl Throat depth: 510 mm Press force: 60 tons Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm plate Punching diameter: 39 mm in 12 mm plate Round steel: 45 mm Square steel: 40 mm Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,000 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1980, Immediately available ex location: MAE Hydraulic Straightening Press Type HY – S 100 RH Year of manufacture: 1980 Inspected according to UVV Stroke: 500 mm Pressing force: 100 tons Gbjdpfx Aey R N H Iobmol Table: 4000 x 500 mm Complete with straightening unit Weight: 5,700 kg Price: EUR 4,500.— plus VAT, ex location Hamburg

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 Gbodpoy Ib A Nsfx Abmol MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Gjdpfx Aboy Nynaomjbl Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, mileage: 72,072 km, power: 75 kW (101.97 HP), first registration: 10/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and equipment = - Spare key - Speed limiter - Reversing camera - Stability control Gbjdpjy Ik N Ssfx Abmsl - Alternating current = Notes = Car-Pass URL: Car-Pass ID: ccdee4be-31bb-48ae-a820-8a7dab568c2e = Further information = Tyre size: 205/60R16 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle: Tyre tread left: 6 mm; Tyre tread right: 7 mm Unladen weight: 1,479 kg Payload: 911 kg Gross vehicle weight: 2,390 kg Damage: none

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) Gbjdpfx Ajy Nkwlsbmol • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: used, mileage: 10 km, power: 75 kW (101.97 HP), first registration: 02/2026, fuel type: diesel, overall weight: 2,040 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Additional equipment: Passenger airbag, passenger airbag deactivatable, driver airbag, traction control (ASR), automatic lighting follow-me-home function (Coming Home, Leaving Home), onboard computer, Comfort Package, Comfort Package with Extenso cab, driver assistance system: emergency call and assistance system (CITROEN Connect), rubber floor mat passenger/cargo area, rear wing doors without windows, body type: panel van, automatic climate control, driver and passenger side separately adjustable, head airbag system, cargo partition wall without window, heated steering wheel, alloy wheels, model update, engine 1.5 L - 75 kW diesel FAP, payload 650 kg, wheelbase 2785 mm, Safety Package, low emissions as per Euro 6e standard, right-side sliding door without window, SCR system (AdBlue technology), front side airbags, black side protection strips, front left seat height adjustable, special paint finish Ice White / Kaolin White, stop-start system, front bumper body color/black, rear bumper standard, automatic door unlocking (in case of accident), exterior door handles black, lashing eyes in cargo area, Worksite Package. Gedpeyf Tatjfx Abmobl Errors, changes, and prior sale excepted. The details provided in this advertisement do not constitute a legally binding specification of equipment and are for general information purposes only. Binding equipment features are exclusively a part of the purchase contract.

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Gsdpfxswnprxs Abmebl Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected Gbjdpfx Aboy Ihbxsmsl under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Tipping hydraulics = Remarks = Crane Rotator: ✓ Squeeze Box: ✓ = More information = Gbodpsy Ip Dbefx Abmel Front axle: Steering Rear axle: Double wheels Crane: TLC 105.2, behind the cab