Used Hommel-Etamic C 305 for sale (55,119)

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 100 mm Nedpji Hph Sefx Aazowl for shelf spacing: approx. 200 mm Dimensions of head plates: 128 x 90 mm Profile dimensions: C 46 x 23 mm Weight: approx. 1.200 kg | per piece General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: like new (used), Year of construction: 2010, Power 1.1 kW, Nsdpfx Aswa R H Ujazewl 220 V 50/60 Hz, Weight 55 kg Coolant R410A. 970 g 3 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Condition: good (used), Year of construction: 1996, incl. Chip conveyor incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Nedpsw Rc Drjfx Aazowl Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Speeds / ranges: 154Rpm Number of slides: 2 Power: 44kW Length: 6000mm Width: 2200mm Height: 2600mm Weight: 33000kg

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode Nodpoyuuzdjfx Aazswl • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 Nwedpszzplcefx Aazel - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: new, Year of construction: 2027, Recirculating air chamber oven, electric, new unit, delivery time 17-18 weeks -Temperature 300°C -Internal dimensions W x D x H: 1500 x 3000 x 2000 mm -External dimensions W x D x H: 2410 x 3560 x 2730 mm Nwjdpjlkb Ezjfx Aazol -Volume: 9000 liters -Control system: Eurotherm Nanodac, 100 programs with 25 segments each -Additional 100 programs can be saved/loaded via FTP or a USB flash drive -2 recirculating air fans -Double door with safety door sensors -Over-temperature protection, Eurotherm 3216i -Control system/recorder with color touch display -Stable steel construction, anthracite exterior -Motorized dampers -Electrical version: 400 V / 50 Hz / 3NPE -Increased heating capacity: approx. 70 kW -Guide rails, recess for driving in a trolley -Documentation, CE declaration of conformity -Electrical wiring diagram with spare parts list We will gladly offer transport, installation, and training for your employees. As a new unit, it is also available with an exhaust fan and other equipment! Delivery time approx. 10-12 weeks. Please contact us! We offer new and used industrial ovens, which we can also modify and supplement according to customer requirements. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, recirculating air oven, chamber oven, heating oven, chamber recirculating air oven, annealing oven, tempering oven.

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) Nwsdpoxbtvfofx Aazsl - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 with three different climate zones: evaporation zone - heating zone - drying zone Nwjdpfszcnu Hjx Aazol Mobile pallets with conveyors, therefore no minimum size requirement for components Continuous vertical conveyor system

Condition: used, mileage: 318,590 km, power: 279 kW (379.33 HP), first registration: 10/2014, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 8x4, wheelbase: 2,000 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 7,000 mm, loading space width: 2,460 mm, Year of construction: 2014, Equipment: air conditioning, crane, electric window regulation, Technical information Number of cylinders: 6 Drivetrain Drive: Wheel Axle configuration Tyre size: 315/80r22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Weights Empty weight: 18.316 kg Carrying capacity: 13.684 kg GVW: 32.000 kg Functional Mast: telescopic (5 parts) Make of bodywork: PALFINGER PK 26002-EH Nsdpezdtzaofx Aazewl = Additional options and accessories = - PTO

Condition: used, Second-hand machine Long-belt grinding machine Motor power: 4 PS / 3 kW Motor speed: 2,890 rpm Table dimensions: approx. 2,460 mm x 900 mm Nwjdpfxjzk Nvmj Aazsl Manual table height adjustment Transport dimensions: approx. 3,600 x 1,600 x 1,450 mm Weight: approx. 500 kg Availability: at short notice Location: Röllbach

Condition: new, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 5,610 mm, total length: 2,550 mm, Spurbreite vorn 1980mm Breite zwischen den Radarmen 1400mm Lastschwerpunkt 450mm 600mm 600mm Überhang vorne 245mm Radstand 1565mm 1915mm 2115mm Überhang hinten 140mm Nennverlustmaß bis Gabelrücken 1100mm 1100mm 1150mm Nwodpfszzrr Sex Aazol Anfahrwinkel max. 45° Rampenwinkel max. 29° Abfahrwinkel max. 45° Mastneigung nach vorn 3° Mastneigung nach hinten 5° Wenderadius min. 1950mm 2260mm 2490mm Plattformhöhe 545mm Plattformbreite 850mm 1200mm 1350mm Fahrgeschwindigkeit max. 15 km/h Steigfähigkeit 15% V2003 T Kubota Diesel / 3 ltr. GM LPG 44KW / 48KW Fahrzeugelektrik 12 Volt Gabelzinkenabmessung 50x150x850mm 50x150x1200mm 50x150x1350mm Bereifung vorne OD 450mm/Width 200mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, total width: 2,200 mm, total height: 3,715 mm, overall weight: 24,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 610 mm, controller manufacturer: DELEM, controller model: DA-66W, product length (max.): 5,100 mm, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. Nwedpfx Aey U Hwroazol - Bending Force / Press Capacity: 330 Ton / 3300 kN- Usable Bending Length: 4100 mm- Distance Between Uprights: 3600 mm- Stroke / Y-Axis Travel: 400 mm- Installation Height / Daylight: 600 mm- Throat / Ausladung: 500 mm- Approach Speed: 0 - 200 mm/s- Return Speed: 0 - 125 mm/s- Working Speed: 0 - 8.5 mm/s- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke / Travel: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Power Supply: 400V / 50Hz- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton (23 t on nameplate)- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Technical Specification Bending Length 4100 mm

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function Features: - Tilting loading platform - 8 tie-down points - Universally applicable, sideboards can be retrofitted Net price: €2,092.44 / Gross price: €2,490.00 Article number: MUL115331800.01 Technical data: • Brand: Martz • Model: UNILADER 330 C • Vehicle type: Car transporter • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 330 x 184 x 0 cm • External dimensions (L x W x H): 490 x 245 x 87 cm • Permissible total weight: 1,500 kg • Unladen weight: 340 kg • Payload: 1,160 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Screen-printed wood floor, slip-resistant and waterproof • Option to insert at all 4 corners for grating attachment, sideboard attachment, or front wall extension • Sturdy eccentric locking mechanisms for securing the loading platform • Very low chassis for a shallow loading angle • Tilting loading platform, with gas springs • Optional retrofitting of higher sideboards and a rear ramp • Very stable steel frame • 8 tie-down points recessed in the side frame profile • Reverse assist system • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Support wheel _____ Accessories can be retrofitted by our specialist workshop!! Njdpjx Tcfpjfx Aazewl - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - Lashing rails - 30mm Iso wall - Aero slope Net: €8,373.95 / Gross: €9,965.00 Article number: TKC227401820.07 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 865 kg • Payload: 1,835 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame very torsion-resistant due to its stable construction • Floor panel made of Finnish multiplex • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Top layers made of hot-dip galvanized and additionally powder-coated steel sheet Nedpfx Aszy Arajazjwl • Roof made of GRP sandwich 25mm • Aerodynamic slope on the side wall • Non-slip with gas springs • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking mechanism, lockable from inside and outside • Rear frame on hot-dip galvanized steel, welded solid • 8 lashing eyes recessed into the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, sandwich panel construction Equipment: - Lashing rails - 6x lashing eyes - 30mm insulated wall Net price: €6,008.40 / Gross price: €7,150.00 Article number: TKC227351820.01 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 775 kg • Payload: 1,925 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust design • Floor made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel locking mechanism • Continuous interior height: approx. 200cm • Continuous interior width: approx. 184cm • 2x maneuvering handles at the front • Doors with special sealing profiles made of hard/soft plastic • Rear frame made of hot-dip galvanized steel, welded Nwsdpfx Aaoyivbzezol • 6 lashing points embedded in the floor (750 DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2026, faceplate diameter 2000 mm swing diameter 2500 mm turning height 1600 mm control Fanuc 0i-D stroke of vertical slide 1000 mm tool holder 1 distance face plate/tool carrier 1075 - 1875 mm vertical adjustment of the crossrail 800 mm workpiece weight 13 t faceplate turning speed range -stepless- 1 - 200 U/min feeds mm/min rapid traverse 10/12 m/min weight of the machine ca. 42 t This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price without live tooling). Nodpjzzd Ryefx Aazowl Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, Sandwich construction Equipment: - Lashing rails - 8x lashing eyes - 30mm insulated wall Nwjdpfozy Dbpox Aazjl Net: €7,050.42 / Gross: €8,390.00 Article number: TKC227401820.02 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Unladen weight: 870 kg • Payload: 1,830 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, screwed V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor panel made of Finnish plywood • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aluminum ramp • Non-slip, with gas springs • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With twist-lock closure, lockable • Loadable with max: 800 kg • 2x maneuvering handles at the front • Rear frame made of hot-dip galvanized steel, welded • 8 lashing eyes recessed in the floor (750DaN/kg) • Slot-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reversing automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, side door, sandwich construction Equipment: - 6 lashing eyes - Lashing rails - 30mm insulated wall Net price: €8,983.19 / Gross price: €10,690.00 Article number: TKC227351820.09 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 355 x 184 x 205 cm • External dimensions (LxWxH): 521 x 237 x 267 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 810 kg • Payload: 1,890 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, robust, bolted V-drawbar • Very stable aluminum frame • Frame is very torsion-resistant due to its robust construction • Floor made of Finnish plywood • Many crossmembers, resulting in high point load capacity • Body made of very strong steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, approx. 70cm, with three-bolt safe locking system, can be locked from the inside and outside • Ramp & door combination • Aluminum loading ramps can be switched to wing doors • Loading possible via ramp or also with a forklift from the rear • Non-slip with gas struts • With 4 crossbars, hot-dip galvanized • Instead of 2 rear doors • With swivel latch, lockable • Load capacity max: 800 kg Njdpfszy Dkdjx Aazewl • Continuous interior height: approx. 200cm • Continuous interior width: approx. 180cm • 2x maneuvering handles at the front • Rear frame on hot-dip galvanized steel, massively welded • 6 lashing brackets embedded in the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection around the interior • Maintenance-free rubber spring axles from ALKO • Reversing aid automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Year of construction: 2025, Label shrink tunnel for shrinking labels on bottles, cans or jars. Basic version with conveyor belt. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: Ø 110xH250mm; tunnel size: L1500xW120xH300mm; max. output: 200 containers/minute; power: 380V, 14kW; machine dimensions: L1800xW600xH1665mm; weight: 250kg. Nwedpfov Nlxfsx Aazsl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2019, operating hours: 2,758 h, Equipment: all wheel drive, Wacker Neuson DV60 Dual View dumper from the year 2019 with only 2,758 operating hours! ----* Manufacturer: Wacker Neuson * Type: DV60 * Year of manufacture: 2019 * Operating hours: approx. 2,758 * Operating weight: 4,733 kg * Payload: 6,000 kg * Rotating dump body * Air conditioning (A/C) * Rotating dump body * First owner * Central lubrication system * Dual View (rotatable driver's seat) * Deutz diesel engine * Rear-view camera * Good condition! * More photos and video available upon request (WhatsApp) * Price: 32,900 euros, net + 19% VAT. ----For further questions, please call: Nwsdozwzkcspfx Aazjl Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is subject to change and without guarantee. Errors and prior sale are reserved.

Condition: good (used), functionality: fully functional, machine/vehicle number: R-QN777, mileage: 46,190 km, power: 130 kW (176.75 HP), first registration: 05/2024, fuel type: diesel, empty load weight: 2,506 kg, maximum load weight: 994 kg, overall weight: 3,500 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,680 mm, total width: 2,190 mm, total height: 3,075 mm, loading space length: 4,150 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, onboard computer, power assisted steering, power mirror, rear view camera, soot filter, spoiler, start-stop system, tail-lift, tire pressure monitoring, truck registration, Box body Tail lift Spare wheel Spare wheel with steel rim Air conditioning Exterior mirror (passenger side) electrically adjustable Driver armrest Stop & Start Cruise control Speed limiter Nwedpozw Iyqjfx Aazsl Cruise control Speed limiter

Condition: like new (used), Year of construction: 2017, operating hours: 485 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 1,680 mm, Manufacturer + model: STILL EXV 14 C * EX * Miretti 2G / Zone 1 - 3D / Zone 22 * Mast: 2F2350 ID: 26080.9198 Category: Demo Mast: 2F2350 Lowered height: 1680 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2017 Hours: 485 hours Capacity: Complete NEW * 24v / 240ah * Manufactured 04/2026 Options: * EX * MIRETTI - E7935 System / Certificate = TUV - CY 16 ATEX 0205756 Gas group = IIB Type = Cat 2G (allowed in ZONE 1 and 2) Temperature class = T3 Gb Dust group = IIIB Type = Cat 3D (allowed in ZONE 22) Nwsdjzv R I Uepfx Aazol Temperature class = 200*C (= T3) C - Db

Condition: as good as new (ex-display), Code: N0249 Brand: HAMMER - FELDER - AUSTRIA Model: C 3 31 - CE Standard Universal 5-works combined machine - CE Standard Planer width 310 mm Table length 1400 mm Helical planer spindle “Sylent Power” with reversible blades Thickness height 225 mm Circular saw unit tiltable 0-45° Cutting height 103 mm Nsdpfx Aaezqgduozewl Scoring unit Aluminium carriage 2000 mm Spindle moulder unit diameter 30 mm – 4 speeds Motor power 4 Hp

Condition: new, Year of construction: 2025, Complete Large Vertical Filling System for premade bags. - Weighing range: 2.000 - 50.000g, max. speed of the machine in neutral: 16 cycles/minute. The system includes product elevator, automatic weighing machine, belt conveyor and bag sealding OR sewing machine. - For granule products like seed, pet food, etc.. The premade bags are clamped manually into the pneumatic clamping device. The product will be dosed by weighing and filled into the bag. By using the belt conveyor the filled bag will be passed to the sealing or sewing machine. - Platform- and In-/Outfeed-dimensions can be customized: Technical Specifications do depend on the final layout/construction of the complete system. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nwsdpfx Aasv Nm Dvszel

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm Nwjdpfx Aashutpvezol turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *