Used Hot Former for sale (3,914)

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Tjdpfx Aljpy Dxrs Aec The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Tjdpst Ag Udofx Al Aec

Condition: new, Year of construction: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum; MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface; mark sensor registration control; quick change former assembly, pneumatic sealing unit; servo motor film pulling; bag size: L(100-300)xW(80-240)mm; max. speed of the machine in neutral: 60 cycles/minute; stainless steel; 220V/3.5kW; 6bar, 0.36m³/min; machine dimensions: L1550xW1160xH1480mm; weight: 600/700kg. - Specifications volumetric dosing unit: 4 cups; perfect for free flowing granulate like products (rice, salt, sugar, etc.); stainless steel; dosing range: 80-2.000ml; max. speed of the machine in neutral: 60 cycles/minute; - Specifications: stainless steel; filling system with rotating screw; Servo motor; filling weight: 10-2000g; 50 liter filling hopper; accuracy: 0.5-2%; max. speed of the machine in neutral: 60 cycles/minute; airproof; damp pressure, side opening hopper, including dust collector. Todpfxjv Nmh Ij Al Ajc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 Tedpfxjxdt Dhj Al Aoc • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. • Location: Upper Austria (AT), loading on site possible. No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.

Condition: excellent (used), SIEMENS TELEPERM measuring transducer 315 bar Tjdjxmv Inspfx Al Aec Further data: see photos The measuring transducer is available in multiple units.

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Todowxlm Hjpfx Al Aec Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: used, Year of construction: 2009, operating hours: 4,050 h, Thermoformer Todpszr N U Esfx Al Ajc Make: Multivac Model: R245 Built 2009 Low running hours: 4050hrs from New! Ex bakery: used for flexi film on Bagels Lots of spare parts included

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Tsdpfx Aezvgi Ijl Aec Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Device weight: 860 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 Todjzwhdispfx Al Aoc - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Tedpfx Aszrikmel Aoc Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: new, Galen Hot Slag buckets are made of Hardox HiTemp material, special adapters, teeth and welding wire. Hot slag can reach temperatures of approximately 750 °C so extend durability with Galen bucket Tsdpfx Aetn Dh Eel Aoc

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Condition: used equipment (not new/factory), functions normally, tested and operational. Todpfx Alszvdfmj Asc

Condition: not inspected (used), functionality: unexamined, Light curtain SICK FGSS300-1 Safety Category: Type 4 1x Transmitter 1x Receiver Supply voltage: 24V +/- 20% Power consumption: 11 W Protection class: IP 65 Tsdpfx Aozkazgsl Aoc Protected field width: 6 m Protected field height: 300 mm Response time: 15 ms 1x Control unit LCUX1-400 Requirement level: Type 4 Power consumption: 6 W Response time: 15 ms

Condition: excellent (used), Year of construction: 1999, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 4204, pressure: 6 bar, total width: 1,700 mm, inner dimension width: 1,700 mm, workpiece weight (max.): 3,000 kg, turntable diameter: 1,400 mm, We offer this shot blasting machine manufactured by Carlo Banfi in 1999 and completely overhauled by METAL SERVICE s.r.l. in 2024. Rotating barrel machine with metal ribs Capacity: 3,000 kg Diameter: 1,400 mm Chamber width: 1,700 mm Magnetic separator Tsdpfxoznvtas Al Ajc Double turbine, each with a 30 kW electric motor and belt drive Complete with: Dust collection filter Loading hopper complete with guards Parts unloading conveyor belt Complete with CE certification, electrical diagrams, and operating and maintenance manual If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system Todjzzwk Tspfx Al Asc adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Condition: used, Year of construction: 1993, functionality: unexamined, machine/vehicle number: 104931294, grinding length: 1,500 mm, grinding width: 600 mm, type of input current: three-phase, input voltage: 400 V, Flat and profile grinding machine Geibel & Hotz FS 1560 SA, manufactured in 1993. Machine no. 104931294, connection 3 x 400 V, 50 Hz, rated current 45 A, fuse rating 63 A, control voltage 230/24 V. Grinding length 1,500 mm, grinding width 600 mm. Magnetic clamping table, coolant supply to the grinding wheel, splash guard, control panel with preset counters for the Y and Z axes. Tedpfx Ajz A Ukwel Aoc Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by agreement. All information without guarantee.

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 Tjdpfxsz A Trge Al Ajc MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Beak-Shaped shrinking dies for U-profiles They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2017, We offer a table shot blasting machine TZS 1 Todpfx Aljwurhis Asc Manufacturer: KOVO Staněk Table diameter: 1,100 mm Year of manufacture: 2017 Weight: 2,500 kg Very good condition.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. Tsdpfez Dfuvjx Al Asc It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation.

Condition: good (used), Technical data for the pallet racking upright: Racking system: Jungheinrich Type: MPB Included in the scope of delivery: 01x Pallet racking upright, used Tjdpfoz A S H Nox Al Aoc Frame profile material color: hot-dip galvanized Bracing material color: Sendzimir galvanized Upright type: STD´B´28 Profile dimensions: 120 x 65.5 x 2.5 mm Includes cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (bolted bracing) Height: 6,750 mm Depth: 1,100 mm Note: Steel grade S420MC is superior compared to S355MC Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: excellent (used), Complete line to produce pancakes, crepes and blinis. Carousel hot plate system. In excellent condition. Tjdpfx Asx Hailel Aec

Condition: new, Year of construction: 2025, MDPE-1 SPOT WELDER portable 1 kVA High-performance transformer 2 levels of power regulation Tsdpfxof Eyvve Al Aec Electronic current and time control Possibility to work with 230V power supply The range of welded sheets: to 1 + 1 mm Width: 110mm Length: 460mm Height: 300mm Weight: 12,5kg Power supply: 230V

Condition: ready for operation (used), smar LD 301 Intelligent measuring transducer, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Tsdpfjz Acz Tsx Al Aec

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, We offer a continuous jet dyeing machine with a roller track – GIETART GW 1500-415. Manufactured in 2005. Number of turbines: 4. Power consumption per turbine: 11 kW. Width of the dyeing chamber: 1500 mm. Height of the dyeing chamber: 415 mm. Roller tracks with electric drive: 11.5 m + 11.5 m. Sweeping brush: 1500 mm. Tjdpfez Ebtkex Al Ajc Total power consumption of the machine: 65 kW. Complete documentation, including electrical diagrams, is included with the machine.

Condition: used, Technical details: Tsdpfx Alou Nu I Ts Aec material diameter up - to:: Ø 20-30 mm material length: ca. 70 mm Numbers of turbines: 3 Stck. Beam Hour: ca. 200 space requirement approx.:: Höhe ges. ca. 4,5 m connected load: ca. 40 kW Shotblasting Line for Springs application area: - for automatically cleaning of beam technical work of springs in troughput transportation trough the plant via drag chain. - troughput speed of the chain adjustable Has been in use very little, only approx. 200 running hours plant consists of: - machine housing, internal ( (high - alloy tool steel - hardened) with interchangeable beam plates - conveyor system - 2 pieces of blasting chamber maintenance doors - bucket conveyor - beam chamber length / depth: approx. 2000mm / approx. 670mm - material steel balls Ø 0,3 - 0,8mm - material to be machined: springs Ø 20 - 30mm x L: 70mm - drive power of the traction chain 1.1 kW - -feed speed max. 15 rpm. - maximum beam feed approx. 500kg (per unit) - connected load approx. 40 kW Condition: - without turbine blades (can be retrofitted for an extra charge) i.D. *