Used Hydraulic High-Speed Press *New* for sale (70,717)

Condition: used, Year of construction: 1990, pressure 25 t Fsdpjt Hw Ezofx Ahpopi throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm Fjdpfx Ajt Hw E Ijhpspi total power requirement 33 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: excellent (used), pressure 16 t Fedeyrhmhopfx Ahpepi weight of the machine ca. 16 t

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m Fsdot Hwrzepfx Ahpspi

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm total power requirement 16 kW weight of the machine ca. 10 t Fjdet Hwxuepfx Ahpspi dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t Fjdpfx Ahjt Hw Dwopspi dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm Fpsdpfsyif Nrox Ahpei dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm. Fpjdpjzhfzmjfx Ahpsi

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, High-lift pallet truck, reach truck Load capacity: 1500 kg Lifting height: 3000 mm Length: 1720 mm Width: 805 mm Height: 2040 mm Mast type: Duplex Dead weight: 590 kg Fork length: 1150 mm Year of manufacture: 2026 Operating hours: 0 Fpjdjui Rbbepfx Ahpsi Condition: new Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24 V Immediately ready for use Available immediately!

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Fodpfxezdnzho Ahpopi

Condition: good (used), Speed head up to 30.000 rpm Fodpjzk U Stofx Ahpspi

Condition: used, Year of construction: 1988, Immediately available from the racing department: Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Fedjzi I Rgepfx Ahpepi Weight 7 tons

Condition: good (used), Hydraulic press 10 tons. Fjdpfx Aozdufyehpjpi Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg

Condition: used, Technical details: pressure: 160 t table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg Fedpfx Aou Nfpuohpopi dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Fsdjv If T Tspfx Ahpopi Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm Fjdpfx Ahewvva Sjpepi table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t Fpsdpfevuuflox Ahpsi required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t Fpedsvut H Ijpfx Ahpji dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, High-speed milling spindle, HENNINGER Type 814 / 5131 / 1:5 / 15000 Maximum speed: 15,000 rpm at 70% duty cycle Gear ratio: 1:5 Power transmission: up to approx. 2.5 kW Fodpfx Asf Axn Uehpopi Overhang: 110 mm (machine spindle to clamping nut) Tool holder: MK4 with M16 draw-in thread Collets, Type OZ16, Ø: 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Weight: 6.5 kg Good condition.

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Fsdpfxoxwk E Ae Ahpopi Stroke 380 mm Max Capacity 100ton

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee. Fjdpfx Ajzd Tf Sjhpspi

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Fpedpfxex Sr Evs Ahpsi Prior sale is reserved.

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 Fodpozbqn Hefx Ahpopi description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Fedpszbql Sefx Ahpjpi Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK AEM-1080Q is a fully automatic, high-performance die-cutting machine with a stripping station, specifically designed for the precise processing of cardboard, solid board, and corrugated board. It is ideally suited for the production of high-quality packaging with exact die-cut contours and clean removal of the die-cut waste. Thanks to its robust construction, high die-cutting force, and modern automation, the KMK AEM-1080Q offers maximum productivity while maintaining the highest precision. It is the perfect solution for packaging manufacturers who rely on speed, reliability, and first-class quality. ### Highlights * Fully automatic die-cutting machine with integrated stripping station * Die-cutting force up to 350 tons * High production speed of up to 6,500 sheets per hour * Precise die-cutting accuracy of ±0.1 mm * Suitable for cardboard, solid board, and corrugated board * Automatic feeder and delivery system * High production reliability and ease of operation * Robust industrial design for continuous operation * Short setup times and high cost-effectiveness ### Applications The machine is ideally suited for the production of: * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Shipping packaging * Displays * Packaging made of cardboard and corrugated board * Labels and special packaging ### Technical Data * Maximum paper format: 780 × 1,080 mm * Minimum paper format: 360 × 400 mm * Maximum die-cutting format: 770 × 1,075 mm * Internal dimensions of the die: 790 × 1,100 mm * Die plate format: 780 × 1,080 mm * Minimum gripper margin: 8 mm * Die-cutting accuracy: ±0.1 mm * Maximum die-cutting force: 350 t * Production speed: up to 6,500 sheets/hour * Feeder stack height: 1,550 mm * Delivery stack height: 1,400 mm * Material thickness, cardboard: 0.1 – 2.0 mm * Corrugated board: up to 4 mm * Main motor: 11 kW * Total power: 17.8 kW * Machine weight: approx. 17,600 kg * Machine dimensions (L × W × H): 5,880 × 2,100 × 2,350 mm (plus pre-feeder and operator platform) ### Standard Equipment * Automatic high-stack feeder * Precise die-cutting system * Integrated stripping station * Automatic delivery system * Robust die plate * User-friendly machine control * High-quality safety and monitoring systems ### Included in the Scope of Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians Fpedpfxozg E Sio Ahpoi ✅ Machine commissioning on site ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support, even after installation ### Delivery Time Approx. 6–8 weeks after order receipt ### Machine Type Fully automatic die-cutting machine with integrated stripping station KMK AEM-1080Q