Used Iemca Smart 320 / 40Ll for sale (4,754)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9 Nwjdpewx Dbijfx Aazel

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Pinacho Smart Turn 6 CNC lathe, 200 x 1000 mm, with Fanuc OI Mate TC control, 65 mm spindle bore, 400 mm swing over carriage, 210 mm swing over cross slide, 4-position automatic tool turret, two speed ranges (0-675 rpm / 675-3000 rpm), working feeds 0-10000 mm/min, 7.5 kW motor, year 2007, in very good condition. Nedpfeztz Awex Aazewl

Condition: used, HORIZON Stacking Receiving Tray, ST-20 The Horizon ST-20 is a smart and efficient tool for print shops. It helps organize and stack printed materials neatly, making work easier and faster. It takes printed sheets and stacks them in an organized way. It can stack sheets flat or slightly offset to the side, which helps manage different types of print jobs. Key Features - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600. - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs. - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it. - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order. Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Nwsdpfxjw Eva Do Aazol Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2015, operating hours: 9,564 h, functionality: fully functional, CNC FANUC 31i-MODEL B5 TOOL PRESETS Nwedpfx Aowayv Eeazsl N. 2 SELF-CENTERING N. 7 HSK TOOLS

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI – Dry Liner Box Trailer Basic Data * Vehicle Type: SZK 18 eLB41-LI * Coupling Height Unladen: 1,150 mm Weights (Registered / Technical) * Fifth Wheel Load: 12,000 kg / 12,000 kg * Axle Load: 18,000 kg / 18,000 kg * Gross Vehicle Weight: 30,000 kg / 30,000 kg Dimensions * Body Dimensions: 13,620 x 2,480 mm i.L. * Internal Height: 2,715 mm * Loading Height Rear Portal: 2,650 mm * Unladen Vehicle Height: approx. 4,000 mm * Front Height: 100 mm (incl. floor) Axles * 2 axles, each with 9,000 kg load capacity * 2nd axle as a lift axle * KRONE axles with air suspension and disc brakes * Brake disc: 430 mm * Aggregate distance: 8,135 mm * Wheelbase: 1,310 mm * Warranty: 6 years without mileage limitation Nedpfxozf Tfbo Aazowl Tires & Rims * 4x 385/65 R 22.5 M+S * KRONE Smart Tyre Monitoring * Without spare wheel Braking System * EBS 2S/2M with ABS * Spring brake parking brake * Braking system: WABCO Box Body * Closed body * Side walls: Sandwich panel 28 mm, steel outer layer, insulated * Roof: Sandwich panel 30 mm, PU core, insulated * Forklift protection inside, on the sides: 320 mm high * Front wall: Steel sheet, inside 9 mm screen-printed panel * Rear wall: Steel container door with seal * LED light strip in the cargo area on the left * 2 ventilation louvers per side * 2 rows of lashing rails (800 mm / 1,600 mm above floor) Floor * 30 mm waterproof glued plywood floor * Strength according to EN 283 up to 7,000 kg forklift axle load Lighting * Complete LED * Multifunction rear lights, full LED (Hella Gen.2) * LED side marker lights with flashing function * Outline/brake lights at the rear, top Certificates * EN 12642 Code XL * VDI 2700 Beverage Transport * Daimler Guideline 9.5 * CEMT/CM certificate Paint * Chassis: RAL 9005 Deep Black * Box body: KRONE White * Roof: RAL 9010 Pure White

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 5,000 mm, total height: 1,500 mm, total width: 1,300 mm, input voltage: 400 V, overall weight: 800 kg, year of last overhaul: 2026, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, Ilapak SMART Horizontal Flowpack Packaging Machine, used. Condition: very good - like new Machine specifications: - Machine speed up to 100 cycles per minute (cpm) - Sealing jaw length 250mm, new straight blade - Acceptable dimensions of the packaged product: length: 50-550mm, width: 20-230mm, height up to 120mm - Adjustable forming shoulder - Maximum film reel length: 630mm - NPNB (No product no bag) system - Sensor for working with printed film - Overall machine length: 5m, width: 1.3m, height: 1.5m - Weight: 850 kg Additional systems: - Vacuum system for removing air from the package Nwsdpfx Aaszugwiozel - Gusseting film folding Optional: - Printer - Labeling machine

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Nwsdpezvpaijfx Aazjl Machine in very good operating condition. It can be inspected at any time during production. Only 10,800 operating hours.

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Nwjdpfx Asrn I Dfeazel Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW

Condition: used, Year of construction: 2008, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 920 mm center height over bed 160 mm turning diameter in the gap 430 mm centre distance 920 mm bed width 181 mm digital readout DPA 2000 3 Achsen spindle bore Ø 38 mm turning speed range 10 - 2.500 U/min power requirement 1,5 kW 3-jaw-chuck diameter 160 mm taper in tailstock-quill MK 3 dia. of quill 32 mm Njdpfx Ajzzrdboazowl quill stroke 100 mm voltage 400 V weight of the machine ca. 410 kg dimensions of the machine ca. 1,60 x 0,70 x 1,55 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 832432 - 3-axis digital display DPA 2000 - Constant cutting speed - Stepless speed control - Digital speed display - RÖHM 3-jaw flat spiral chuck - Face plate Ø 255 mm - Fixed steady rest - Rotating steady rest - Machine light - Rotating center point

Condition: excellent (used), CTI FoodTech 320 APA Automatic Fruit Slicing and Pitting Machine – Stainless Steel The CTI FoodTech 320 APA automatic fruit slicing and pitting machine is designed for the industrial processing of fruit through automated slicing, opening, and pit separation operations, reducing manual handling and providing a continuous and uniform process. The equipment features a feeding and conveying system that positions the fruit pieces to automatically perform the slicing and pitting operations. Its configuration allows simultaneous operation with multiple pieces, making it particularly suitable for industrial fruit processing lines. Its construction, primarily in stainless steel, and its hygienic design allow for use in canning plants and fruit processing facilities. MAIN FEATURES - Manufacturer: CTI FoodTech - Model: 320 APA - Type: Automatic fruit slicing and pitting machine - Functions: Slicing, opening, and pitting - Automatic and continuous processing - Controlled product feed - Multiple processing positions - Individual piece positioning Nwodpfxjzxcaue Aazsl - Automatic cutting system - Pit separation - Continuous product transport - Construction primarily in stainless steel - Safety guards - Hygienic design for the food industry - Integrable into industrial fruit processing lines APPLICATION The CTI FoodTech 320 APA is designed to automate the preparation of stone fruit before subsequent processing or packaging operations. The fruit is fed and positioned individually in the conveying system. As it moves along, the equipment performs the necessary operations to slice the product and separate the pit from the pulp, producing fruit that is ready to continue to the next stage of the process. It can be integrated with: Fruit feeding systems Washers Sizers and graders Peelers Inspection belts Cutting equipment Scalding or cooking systems Freezing Fillers and packaging machines Complete fruit processing lines APPLICATIONS Especially suitable for canning industries, fruit processors, frozen fruit manufacturers, and fruit and vegetable processing plants that need to automate slicing and pitting operations. Depending on the installed format and configuration, this type of equipment is intended for the processing of stone fruit, preparing the product for canning, freezing, further processing, or packaging. The combination of CTI FoodTech technology, model 320 APA, and automatic processing provides an industrial solution for fruit preparation and pitting lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: manual, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, foot remote control, Techna – Fab Swing Beam Guillotine Model: QC12Y-6 x 3200mm Year: 2007 Max. Cutting Length: 3200mm Max. Cutting thickness: 6mm Machine with: Power Back Gauge Nsdpezv Tzkjfx Aazowl Squaring Arm Front Supports

Condition: ready for operation (used), Gildemeister CNC lathe Model CTX 320 Linear Year : 2003 Working length : 600 mm. Max. working diameter : 245 mm. Spindle speeds : 6000 rpm. Spindle bore 80 mm Spindle speeds on the Sub spindle : 4000 rpm. Spindle borer : 65 mm. Number of tools : 12 pcs. No. of rotating stations : 12 pcs. Spindle speeds rotating tools : 5000 rpm. X-axis travel : 160 mm. Z Travel : 450 mm. Y-axis travel : +/- 35 mm. Njdpfxozu R E Ds Aazewl Control : Siemens Cycle hours : 29000 Equipped with : -Subspindle -ECO LM 65 loader -2 straight rotating tool -2 angle rotating tool -6 holder -Chuck -Manuals

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Serial number: 202210301 Nwedpfxezwxp Ae Aazol Operating hours: 1,160 h Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Pressure vessel Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring Nwsdpfxsxz Dqmo Aazjl • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 eLB41-LI – Dry Liner Box Semi-Trailer Basic Data • Vehicle type: SZK 18 eLB41-LI • Fifth wheel height, unladen: 1,150 mm Weights (Permissible / Technical) • Kingpin load: 12,000 kg / 12,000 kg • Axle load: 18,000 kg / 18,000 kg • Gross weight: 30,000 kg / 30,000 kg Dimensions • Body dimensions: 13,620 x 2,480 mm (internal length) • Internal height: 2,715 mm • Rear door clearance height: 2,650 mm • Unladen overall height: approx. 4,000 mm • Front construction height: 100 mm (incl. floor) Axles • 2 axles, each rated at 9,000 kg • KRONE axles with air suspension and disc brakes • Brake disc size: 430 mm • Aggregate spacing: 8,135 mm • Wheelbase: 1,310 mm • Warranty: 6 years with unlimited mileage Tyres & Rims • 4x 385/65 R 22.5 M+S • KRONE Smart Tyre Monitoring • No spare wheel Braking System • EBS 2S/2M with ABS • Spring-actuated parking brake • Brake system: WABCO Box Body • Closed body design • Internal forklift impact protection, lateral: 320 mm high • Front wall: steel sheet, interior 9 mm phenolic resin plywood • Rear wall: steel container-type door with seal • LED light strip, left side of loading compartment • 2 ventilation louvres per side • 2 rows of lashing rails (800 mm / 1,600 mm above floor) Floor • 30 mm thick waterproof bonded composite floor • Load capacity compliant with EN 283 up to 7,000 kg forklift axle load Lighting • Full LED lighting • Full LED multifunction rear lights (Hella Gen.2) • LED side marker lights with indicator function • Rear contour brake lights (upper) Certificates • EN 12642 Code XL • VDI 2700 Beverage Transport • Daimler Guideline 9.5 • CEMT/CM certificate Nwjdpfx Aevw Hnqjazel Paintwork • Chassis: RAL 9005 Deep Black • Box body: KRONE White • Roof: RAL 9010 Pure White

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a refurbished generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Nwedpfx Aajz D H Dlozel Option to switch to the EGHE 200°C + bypass configuration. Further customization can be discussed.

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Nsdjzq D Iqopfx Aazswl Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 375 mm Nwedpjz E A Dwjfx Aazel Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Opening Force | Stroke: Max. 130 kN | 350 mm. Nwsdpfx Aasy Aybyjzsl Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: used, Year of construction: 2006, Lot of seven sturdy, used rack pallets, stackable. Njdpfxez Dw Hkj Aazswl Dimensions approximately 320 x 120 x 120 cm (L x W x H), individual weight approximately 125 kg. Fitted with 12 mm vehicle construction board; the racks can be stored on the pallet, see photos. Payload 1.3 tons, stacking load 3.9 tons, year of manufacture 2006. Transport dimensions approximately 320 x 120 x 200 cm (L x W x H). Weight approximately 900 kg. Sold only as a complete package; the price is for all 7 pallets together.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 5,400 h, mileage: 87,000 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS SOCAGE DA 320 Year 2010 Working height 20 m Horizontal outreach 9 m Basket capacity 230 kg Nwedszqzwiopfx Aazol Hours 5.400 km 87.000 Complete of all documents

Condition: used, mileage: 547,000 km, power: 302 kW (410.61 HP), first registration: 03/2018, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Additional information: * Payload: 12577 kg * Height: 3900 mm * Width: 2550 mm * Length: 5960 mm * Type | Front axle: Dunlop R * Tire size | Front axle: 385/65 R22.5 * Tire tread depth (inner, left) | Front axle: 100% * Tire tread depth (inner, right) | Front axle: 100% * Maximum axle load | Front axle: 8000 kg * Type | Rear axle: Goodyear R * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth (outer, left) | Rear axle: 90% * Tire tread depth (inner, left) | Rear axle: 90% * Tire tread depth (outer, right) | Rear axle: 90% * Tire tread depth (inner, right) | Rear axle: 90% * Maximum axle load | Rear axle: 11500 kg * Wheelbase: 375 cm * Cabin: Yes * Price on request: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Steering | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Additional features: * 27 MC / CB radio * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control system (TCS) * Automatic transmission * Automatic climate control * Heated mirrors * Bluetooth * On-board computer * Camera connection for trailer camera * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Electronic Stability Program (ESP) * Website * Air conditioning * Refrigerator * Air suspension * Air-suspended seats * Metallic paint * Fog lights * Parabolic suspension * Particle filter * Radio/CD player * Rain sensor * Retarder * Disc brakes * Sunroof * Sleeper cab * SemCollection * Side skirts * Sun visor * Spoiler * Auxiliary heater * Central lubrication system Nodpfx Ajz Dzl Roazowl * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 2014, Clamping force: 50 t Screw diameter: 30 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Shot volume: 85 cm3 Shot weight: 77 g Injection pressure: 2000 bar Type: Horizontal Drive: Hydraulic Nwjdpfxjzcaips Aazol

Condition: like new (used), Year of construction: 2018, operating hours: 591 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: JUNGHEINRICH EJG 320 Mast: 2W2500 ID: 24061.5795 Category: Demo Mast: 2W2500 Nodpszv H Scjfx Aazswl Lowered height: 2120 mm Lifting height: 2500 mm Capacity: 2000 kg Year: 2018 Hours: 591 hours Battery: 24 V / 330 Ah - GEL Options: A VERY unique COUNTERBALANCE stacker!!! Equipped with: - FREE-LIFTING adjustable forklift forks - SUITABLE for all types of pallets - POWER STEERING!!!

Condition: like new (used), Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake Manufacturer: Bystronic Model: XACT Smart 160/3100 Serial number: XACT 22040SE Year of manufacture: 02/2022 Technical specifications: Maximum pressing force: 1600 kN Maximum working length: 3100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Nwjdpfx Aey U I Tbeazel Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 10,500 kg