Used Jac Mb for sale (3,331)

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered Kedpfx Aoxaa Sdjl Nslu . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) Kedpfxob A R Tno Al Nelu -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Condition: excellent (used), -Bearing type: Spherical roller bearing Kljdpfx Alob A Rzze Nju -Type: 23224. VB 33. MB -Brass cage -Grease groove -Borway diameter: 120 mm -Outer diameter Ø: 215 mm -Width: 76 mm -Weight: 12.5 kg

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane Kledpfscb E Trjx Al Nju -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Klsdpfxedzqa Ho Al Neu Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Kedsxcwxgepfx Al Nelu Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: good (used), geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle Klsdpfx Aleb A Rndj Nsu -Shaft diameter: Ø 24 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

Condition: used, first registration: 06/1975, axle configuration: 4x4, color: red, gearing type: mechanical, Year of construction: 1975, Unladen weight: 4,000 kg Maximum speed: 25 km/h Interior: black Number of keys: 1 Manufacturer: Mercedes-Benz Provincialeweg 5334 J VELDDRIEL, NL Kjdpfsuu T S Hjx Al Nolu

Condition: used, KAMRO thickness planer Model MB 6 Motor 5.5 HP / 400 Volt 2-knife cutterhead (strip knives) Planing width 630 mm Klodpfx Aeypbf Ejl Nju Planing height approx. 200 mm Feed speed 9 and 18 m/min 2 table rollers Knife setting gauge Weight approx. 1000 kg

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Ksdpfsrwxz Rex Al Nelu Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: good (used), Manitowoc Multiplex MB-8-1PP slush machine ice cream machine Manitowoc Multiplex MB-8-1 workstation for mixing in a cup. Features: Mix and serve directly in the cup. Improve consistency, control product cost, reduce waste, labor and serving time. Automated features to complete the entire beverage preparation process - right in the cup! Integrated nugget ice machine The integrated nugget ice maker is the perfect ice for all types of specialty drinks and provides high beverage capacity during peak hours. The ice maker meets a large ice demand within 24 hours. Built-in refrigeration for storage and dispensing system. Exclusive easyToUCH™ control system. User-friendly, icon-based touchscreen control simplifies beverage preparation and inventory management. The control panel provides visual training, cleaning, maintenance and data collection information. With the icon-based easyToUCH™ touchscreen, preparing a beverage is as easy as pressing a button. This intuitive control panel lets you do everything you need to operate the machine - from beverage preparation to training to cleaning. Klodpfx Ajpgwh Aol Nju Menu language Dutch Without product holder/drawer Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL Klsdpfxexa T Ryo Al Nou * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab * Reversing camera * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch Klodpfsg Ewi Nsx Al Nju - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 1982, Equipment: cabin, MB-Trac 800 Kljdpfx Aexrivpsl Nju Central gear shift Hydraulics Forestry equipment was only installed after refurbishment. The vehicle has never worked in the forest!

Year of construction: 2006, condition: ready for operation (used), CME horizontal milling machine Type MB 3000 FLEX Rotary table size 1.400 x1.400 mm Max. table load 12T Longitudinal travel (X) 3.000 mm Vertical travel (Y) 2.000 mm Cross travel (Z) 1.000 mm Drill travel (W) 700 mm Rotary table (B) 360 - 0,001 degree Boring spindle dia. 150 mm Spindle speed 50-2200 rpm Spindle taper 50 ISO Spindle motor power 30 kw Ram size 580-430 mm CNC Controller Heidenhain iTNC530 Accessories: Cooling through spindle 60 bar ATC 60 pots Hours: Spindle 27.048 hours Machine dimensions: Height 4.856 mm Length 6.663 mm Width 10.000 mm Kjdpfxogui Txj Al Nolu Weight 70 T Build year 2006

Condition: used, Electric chain hoist, electric lifting unit, crane HADEF type MB 62/69 Kjdpfsxciuyox Al Nolu Serial no. 52795 Year of manufacture: 1979 Load capacity: 500 kg Hook path: 2.5 meters Lifting speed: 4 m/min Fine lifting speed: 1.2 m/min 2 load chains = 500 kg Power supply: 380 Volt, 50 Hz - Suspension eye at the top of the crane Good condition

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Kledsx A Imbspfx Al Nju Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Kedpex A Imhofx Al Nelu Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: used, machine/vehicle number: 1285A, mileage: 40,141 km, power: 46 kW (62.54 HP), first registration: 01/1964, fuel type: gasoline, color: green, gearing type: mechanical, Equipment: all wheel drive, trailer coupling, Oldtimer-Tuv is made new only 332,- Euro tax and insurance per year , The Willys-Jeep is the Us-Jeep of the second world war. A real feast for the eyes for every military vehicle fan. The Jeeps are in a very good original condition, also the body is in a great condition has not been welded yet has of course no holes!!!! directly from the French military very well maintained and serviced!!! Equipped with: folding windshield, soft top, manual transmission with 3 gears plus off-road reduction, four-wheel drive, 4-cylinder in-line engine side-controlled with 2161cm? The Jeep drives really great!!! Tire size 6.50 - 16, ere M201 in stock! Also other all-wheel drive vehicles and other military vehicles are still available in my offer. All my vehicles can be seen with technical data and prices on my homepage. For more information call 0049 (0)2248 le Greetings your Philipp from the Hanfbachtal Kedpfxeqx Szgo Al Nolu

Condition: used, Year of construction: 2002, operating hours: 10,500 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: Okuma, controller model: U100, spindle speed (max.): 8,000 rpm, coolant supply: 12 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MB46 from 2002 Low operating hours! Machine can be inspected under power. 32 tools BT40 Scraper belt conveyor Internal cooling 8 bar Kljdpfewt Dqaox Al Nsu 8,000 rpm 4th axis included

Condition: ready for operation (used), functionality: fully functional, mileage: 193,044 km, power: 125 kW (169.95 HP), first registration: 08/1999, fuel type: diesel, empty load weight: 9,290 kg, overall weight: 15,000 kg, tire size: 11 R 22,5, axle configuration: 4x2, color: orange, gearing type: mechanical, suspension: steel, number of seats: 2, Year of construction: 1998, Equipment: ABS, cabin, differential lock, * German vehicle, * double H-shift gearbox, * leaf spring suspension, Bucher Aufbah * Cityfant 60 * front disc brush * second disc brush * cylindrical brush * 11,248 operating hours * water tank * spray system Kledjw Nhmvopfx Al Nsu * 4-cylinder Mercedes-Benz auxiliary engine * belt drive for suction unit. The vehicle is in exceptionally good condition for its year, several spare brushes are available. !!!!! New MOT (TÜV) available at extra cost!!!!!

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each Kodpsih H Epefx Al Nolu 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 01026, grinding length: 1,200 mm, grinding width: 600 mm, total height: 550 mm, total length: 1,200 mm, total width: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 550 mm, feed length Z-axis: 1,200 mm, workpiece weight (max.): 975 kg, grinding wheel diameter: 400 mm, distance table to spindle center: 600 mm, table length: 1,200 mm, table load: 975 kg, table width: 550 mm, grinding wheel width: 100 mm, overall weight: 6,750 kg, grinding spindle motor power: 11,000 W, rotational speed (max.): 1,400 rpm, input voltage: 400 V, control cabinet length: 1,200 mm, control cabinet width: 800 mm, control cabinet height: 2,020 mm, space requirement height: 2,935 mm, space requirement length: 4,450 mm, space requirement width: 2,540 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: FAVRETTO SURFACE GRINDING MACHINE - Model: MB 100 DGT CNC - Year: 2005 - Serial No.: 01026 - Controller: SIEMENS 810D Ksdpfx Aley Ibpis Nelu - Magnet 1000x500 / working area 800x500 mm - Maximum grinding wheel: 400x152.4x100 mm For sale is a very lightly used, highly precise, and stable CNC surface grinding machine, capable of grinding 1000x500 mm, including a grinding wheel balancing device. The machine has been regularly maintained and was used for grinding small workpieces up to 1 kg. It is connected to the power supply and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 760 mm Z-axis travel: 760 mm Spindle center to table surface: 50 to 810 mm Spindle end to table center: 135 to 895 mm Table size: 500 x 500 mm Max. load capacity: 500 kg Index positions: 360 Speed range: 50 to 15,000 rpm Number of speed ranges: stepless Taper: NT No. 40 Spindle diameter: 70 mm Feed Rapid traverse (X/Y/Z): 60,000 mm/min Manual feed (X/Y/Z): 1 to 60,000 mm/min Tool changer Tool holder: Standard MAS BT40 Magazine capacity: 48 stations Max. tool diameter (adjacent positions occupied): 70 mm Max. tool diameter (adjacent positions free): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Total power requirement: 43 kW Dimensions & Weight Space requirement: 2.7 x 4.73 x 2.87 m Machine weight: 11.5 t Kledpfx Alsxvq Hds Nju

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Kodpfxox Av Uae Al Njlu