Used Knoll Filter Device for sale (18,362)

Condition: excellent (used), Collet set MK 4 Lodjupzblopfx Ac Ajhh Make Horma 17 pieces from 4-25 mm in diameter (28562) in carrying case

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Lodpscnw U Djfx Ac Aehh Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Lhjdpjcqy I Sjfx Ac Aoh Location: in stock at 54634 Bitburg

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Lhedpfoy A Tpqex Ac Ajh Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Lsdpocdy I Rsfx Ac Aehh Location: Available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser Lhsdecnw T Ijpfx Ac Aoh 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. Ljdpfx Acozdty Ns Ajhh The images may contain accessories.

Condition: good (used), Welding device, welding robot -Welding device: for plates that are to be welded at an angle Lodpfjb A Hrlox Ac Ashh -with: travel distance adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable -without: MIG/MAG welding machine

Condition: used, Year of construction: 2006, Nominal volume flow: 4900 m³/h. Minimum volume flow: 3532 m³/h. Intake nozzle: 250 mm. Static pressure at Vmin: 2740 Pa. Air pressure connection: 8.5 bar. Motor: 6.5 kW. Storage location: Nattheim. Lhsdpfx Acozd An Nj Aoh

Condition: good (used), Welding rotary device, rotary tilting table, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary and tilting table, welding rotary device -Three-jaw chuck: Ø 200 mm Lsdpfx Aef Nb Dwoc Aohh -Speed: 1/8 to 2 1/4 rpm -Direction of rotation: Right/left rotation -Peak height: 535 mm -Dimensions: 925/1100/H700 mm -Weight 188 kg

Condition: good (used), Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive Lsdpfx Asb Hiy Ssc Ashh -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights Lodpozf E Hqjfx Ac Ashh - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Ljdpfx Aozf E Dvoc Ashh Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak times, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers are easy to transport. The machine has undergone a major inspection in our in-house workshop and is fully functional. It has only been operated with a water softener, so there are no limescale residues in the system. The matching drip tray for dispensing coffee is not shown in the picture, but it is also included. The base cabinets shown in the picture are not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Ljdpfjzbk Sxsx Ac Aohh Tested & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal Technical data: W x D x H: approx. 1173 x 600 x 947 mm Design with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Further details: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water outlet: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, major inspection performed, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: like new (used), INLET 10 bar Max Temp. -10°C...60°C Application: Compressed air systems Width: 70 mm Height: 300 mm Depth: 75 mm Weight: 726 g Lhsdpfszcla Tox Ac Aeh Condition: Like new

Year of construction: 2017, condition: excellent (used), SCAIME bag pourer with Donaldson stainless steel filter Year: 2017 Ljdorfzdlspfx Ac Ajhh

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Weight: 38 kg Good condition Lsdpfxjzbhuqo Ac Aohh A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price. Lhjdpey Eyzfefx Ac Aeh

Condition: used, • Type: DSH2/12V • Suction cup type: 150K Lhsdpfx Acjywi Dms Ajh • Year of manufacture: 2013 • Serial number: 84 • Lifting capacity: 900 kg vertically/horizontally • Lifting capacity per suction cup: 150 kg vertically/horizontally • Can rotate and tilt • Includes battery for independent operation on construction sites

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, total width: 1,160 mm, total length: 1,160 mm, For sale is a high-quality Motan material distribution station (6x6) for the central supply of materials in plastics processing. Lhjdpjzcvgwofx Ac Ajh The system has a robust design and is intended for continuous industrial use. The use of hardened steel profiles makes the material distribution station particularly wear-resistant and ideally suited for abrasive plastics. Thanks to its compact design on a pallet, it is easy to transport and can be quickly put into operation.

Condition: used, Year of construction: 2022, Volume flow rate: 18,000 m³/h, active filter area 237.6 m², condensate drain, designed for 10 machining centers, mounted on a custom-built steel frame above the hall entrance gate, complete with piping, manufactured to the dimensions of the hall, and intended as a supply line to the individual CNC machining centers. Subject to prior sale. Lsdpfx Acey T Nxve Aehh

Condition: used, functionality: unexamined, Self-propelled oil skimming device for removing oil from still and flowing bodies of water. Diameter approximately 1,250 mm Lsdpfx Acozbt Ice Aehh Capacity up to 400 l/min.

Condition: excellent (used), Covis control Measuring range 330 x 400 mm Spindletaper SK 40/50 Lhodpowufaxjfx Ac Aeh MARCELS MASCHINEN AG

Condition: good (used), exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter Lsdog I D Nyjpfx Ac Ashh -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. Lodpfx Ajl Ax Uwec Aohh The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm