Used Kolbus Da 36 for sale (8,668)

Condition: new, neu Dkodpjyrhppofx Agget ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Dedpfx Aowu Suvoggjkt Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec Dodpfxowvih No Aggjkt - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A Djdpex Rz Dxsfx Aggokt - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Dodpfx Aoxz Ex Soggskt Feel free to contact us for more information!

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop Djdjykca Hspfx Aggskt - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 Dkodpfx Ajxrp Thegget stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2007, loading space length: 13,633 mm, loading space width: 2,435 mm, loading space height: 2,871 mm, * Lift axle * Edscha convertible top * Disc brakes * Tail lift * Unladen weight: 8,850 kg -----Internal vehicle number: 11086----Errors and prior sale excepted Dksdpfx Agjwz Dl Teget WhatsApp support available! If you have any questions about the vehicle or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp - German, English -- WhatsApp - German, English, Arabic

Condition: excellent (used), DEMAG hub motor 36/20 K6P for electric hoist P1600 available with clutch and brake disc on request Type 36/20 K6P, motor in good, tested condition Motor/armature/rotor/runner, bearing shields, clutch, brake also available separately P2000 casing, cable drum, cable guide from large stock Dkedpfx Aev Uai Aoggot

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope Dodpfev Uvftox Aggskt P2000 rope guide Traverse / sheave - rope pulley All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: like new (used), functionality: fully functional, Heidelberg Ti 36/66 folding machine + Kbi36 + Sta 30 F with marking system + NSF 36 (no stop feeder), consisting of: - Flat pile feeder Fi 36 - Year 2002 - 1st folding station Ti36/6 with 6 folding pockets on the first unit, equipped with new extra grip soft rollers (Falztechnic) - Year 2002 - 2nd folding station Ti 36/6 with 6 folding pockets on the second unit, equipped with new extra grip hard rollers (Falztechnic) with polycord for extra small formats - Year 2003 - Electronic knife KBi 36 for cross folding - Year 2002 - Small format delivery STA 30 F + MKE with shingled stack movement - Year 2005 - No stop feeder NSF36 for continuous production. - Shingle delivery SA36 - Year 2004 Djdpeyzpmcsfx Aggskt - Transfer table between 1st and 2nd station

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm Dsdpfxjyuu H Hj Aggekt -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Condition: used, Charger Dedpfsyvcmwjx Aggskt

Condition: excellent (used), power: 18 kW (24.47 HP), fuel type: diesel, Year of construction: 2026, operating hours: 4 h, Year of manufacture: 2026 Model year: 2026 Dksdpjy Smzfofx Aggot Drive: Track GVW: 3.900 kg CE mark: yes Technical condition: very good Visual appearance: very good Damages: none

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m Dodpfx Ajy Tyyqjggokt weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) Dkedpjzdcwrjfx Agget - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, functionality: fully functional, mileage: 221,149 km, power: 368 kW (500.34 HP), first registration: 02/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Dedpfx Agszdc Dxsgekt Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 14 mm Front right - 14 mm Rear left inner - 5 mm Rear left outer - 6 mm Rear right inner - 6 mm Rear right outer - 6 mm

Condition: good (used), Year of construction: 2001, Weiler DA 210 Lathe Weiler DA 210 with Fagor digital readout, year of manufacture 2001, in very good original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant!! Technical Data: WORKING AREA Centre height: 210 mm Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre distance: 1,000 mm SPINDLE Spindle nose: DIN 55027 / DIN ISO 702-3 Size 6 Spindle bore: 52 mm Spindle bearing diameter (front): 83 mm MAIN DRIVE Drive power 60% / 100% duty cycle: – / 5.5 kW Speed range: 44 – 2,000 rpm Number of speeds: 12 FEED RANGE Number of feeds: 66 Longitudinal: 0.072 – 4 mm/rev Dkedpfx Aoy Auyqjggst Cross: 0.036 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.5 – 28 mm TAILSTOCK Quill diameter: 65 mm Quill stroke: 120 mm Internal taper: DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 About the machine: HIGHEST PRECISION, USER-FRIENDLY OPERATION AND SOPHISTICATED TECHNOLOGY are advantages of the conventional Weiler DA series. Offered is a Weiler DA 210 lathe with Fagor digital readout, year 2001. This lathe is in very good original condition. It comes from a workshop where it was only occasionally used for special production. Very easy to operate controls. The guides are regularly lubricated via the central lubrication system. The Weiler DA 210 has been mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler DA 210 under power at our facility. You can find further lathes from well-known manufacturers on our website.

Year of construction: 2021, condition: used, Refrigeration Dryer – ALUP ADD 36 Manufacturer: ALUP Kompressoren GmbH Model: ADD 36 (1) Year of manufacture: 2021 Machine type: Refrigerated compressed air dryer Description The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems. This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines. Technical Specifications - Manufacturer: ALUP Kompressoren GmbH - Model: ADD 36 (1) - Year: 2021 - Product number: 4102005889 - Serial number: ITJ560627 - Power supply: 230 V - Frequency: 50 Hz - Power consumption: 0.236 kW - Phase: 1 Ph Operating Specifications - Working pressure: 15 bar - Maximum pressure: 15 bar - Maximum inlet temperature: 55 °C - Maximum ambient temperature: 43 °C - Refrigerant type: R513A Key Features - Reliable moisture removal from compressed air systems - Compact and energy-efficient design - Protects pneumatic tools and machinery - Suitable for continuous industrial operation - Easy integration into existing compressor installations Dodpjyt H Duofx Aggekt Applications - Industrial compressed air systems - Food and packaging production lines - Manufacturing facilities - Pneumatic equipment protection Condition Used.

Condition: used, mileage: 754,052 km, power: 338 kW (459.55 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Total Allowable Weight: 18000kg, Fabric Seats, ROAD TRACTOR Dkedpfszf Rzmsx Aggjt

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, total length: 6,800 mm, total width: 2,500 mm, total height: 3,700 mm, working height: 500 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, Lisec gas filling press FPS-36/27US, year 2006, working diresction from left to right, consisting of following: Djdpfxjzpvx So Aggjkt - RTVN-27/27MZ, measuring section for gas filling press (length, height, glass thickness and spacer size) - FPS-36/27US, gas filling for argon gas - GML, gas dosing device The machine is in good working condition and will be sold as is EXW current location in Romania, dismantled and loaded to truck. It is available immediately

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material Dkodpfszl N Apjx Agget - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 8 kg, warranty duration: 24 months, type of input current: DC, feed length X-axis: 3,400 mm, space requirement length: 3,700 mm, table height: 160 mm, space requirement width: 140 mm, welding current (max.): 3 A, power: 0.072 kW (0.10 HP), Equipment: CE marking, documentation/manual, Pedante is an automatic digital length stop for miter and compound miter saws. It is designed for workshops where many parts are cut to the same length, where cutting lengths change frequently, or where manual measuring takes too much time during repeated work. The required length is entered on the touchscreen, after which the motorized stop automatically moves to the set position. This reduces manual measuring, shortens setup time, and helps improve cutting accuracy in day-to-day production. Dedpezumkpofx Aggekt The system is suitable for joinery shops, furniture production, window and door manufacturers, and workshops processing aluminum, PVC, wood, plastic, LED profiles, and other linear materials. Pedante can be mounted on either the left or right side of the saw and can be installed as a retrofit solution on many existing saw setups without replacing the machine. It supports millimeters and decimal inches, monitors its position automatically during operation, and is built for professional workshop use. Several models are available depending on the required working length, from 1,040 mm to 5,760 mm. The system is useful for repeated cuts, batch production, custom-length parts, and work where accurate material positioning is important. Prices range from €1,440 to €2,040 excl. VAT, depending on the selected model and working length.

Condition: excellent (used), ZILLI & BELLINI Automatic Sealing Machine with 12-Piston Filling Unit – Stainless Steel Automatic sealing machine from ZILLI & BELLINI with a 12-piston filling unit, designed to integrate the dispensing of the product and the subsequent hermetic sealing of containers within an automated industrial line. The unit combines a filling system with 12 pistons and an automatic sealing section, allowing both operations to be performed in a synchronized and continuous manner. The piston filling technology is particularly suitable for products whose dispensing requires repeatable volumetric control. Its construction, primarily in stainless steel, along with the complete enclosure of the work areas and the integrated control panel, makes it suitable for professional installations in the food and canning industry. MAIN FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic filler + sealer -Filling unit: 12 pistons -Volumetric dispensing system -Automatic and continuous filling -Automatic container feeding -Synchronized positioning and transfer -Rotary processing system -Dispensing via pistons -Automatic sealing section -Cap feeding / positioning according to configuration -Continuous industrial operation -Construction primarily in stainless steel -Complete enclosure of work areas -Doors with inspection windows -Integrated control panel -Safety guards -Structure on adjustable supports -Integrable into complete packaging lines PROCESS Containers are automatically fed into the machine and transferred to the 12-piston filling unit. The system performs a controlled volumetric dispensing, introducing the pre-set amount of product into each container. Once filling is complete, the containers are automatically transferred to the sealing section. In this second stage, the caps are positioned on the containers, and the corresponding mechanical sealing is performed, resulting in a product that is ready to continue to the subsequent operations in the line. It can be integrated with: -Container depalletizers -Washing / rinsing machines -Product feeders -Cap feeding systems -Conveyors -Weight checkers -Inspection equipment -Pasteurizers -Autoclaves / retorts -Labeling machines -Cartoning machines -Palletizers APPLICATIONS Dksdpfx Agezxwxfsgot Particularly suitable for canning companies and manufacturers of packaged food products that need to automate the filling and sealing operations simultaneously. The 12-piston system may be suitable for various liquid, semi-liquid, or viscous products, depending on the product characteristics and the specific configuration of the equipment. Container formats, dispensing volumes, compatible products, and the type of sealing will depend on the tooling and configuration currently installed. The combination of ZILLI & BELLINI technology, 12-piston filling, and automatic sealing provides a compact solution for continuous industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 5,400 h, mileage: 87,000 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS SOCAGE DA 320 Year 2010 Working height 20 m Dkedpfxszqzwie Aggst Horizontal outreach 9 m Basket capacity 230 kg Hours 5.400 km 87.000 Complete of all documents