Used Konica Minolta Develop Ineo+1060L for sale (987)

Year of construction: 2019, operating hours: 3,575 h, condition: excellent (used), Weiss Climate Test Chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours: 3,575 h. For sale is a high-quality climate test chamber of the type ClimeEvent C/1000/70/5. This unit is used in industry, development, and quality assurance to test components and products under extreme temperature and climate conditions. The chamber enables realistic simulation of environmental conditions – from severe cold to high temperatures as well as humidity exposure. Ideal for electronics, automotive, materials testing, and research. The unit operates reliably and reproducibly and is designed for long-term tests as well as standard-compliant testing. With this climate chamber, temperature and humidity conditions can be precisely set and controlled. This enables you to test aging, load, and function of components under real-world environmental conditions. Typical applications include temperature cycling tests, climatic tests with humidity, and endurance tests. Thanks to rapid temperature changes (up to approx. 5 K/min), accelerated testing is also possible. Technical specifications: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% r.h. Interior (test chamber): approx. 950 x 1100 x 950 mm Itjdpfsy Avfzex Am Ejf Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A / R23 Weight: approx. 1,300 kg Important information for you as a buyer for your security: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding Itedoycuuyopfx Am Ejf • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Iedpfxey A H Ume Am Ejtf Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: excellent (used), functionality: fully functional, Very nice AMT PostPro SFX vapor polisher. Comes with parameters for TPU and PA12. Includes all extra accessories like the rack underneath. Itedpfxoy Dgluj Am Esf Additionally, this system comes with custom-developed recipes to run third-party consumables, saving approximately 70%!

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Itsdexqhuuopfx Am Esf Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Itodjyl Av Djpfx Am Eef

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS Itedpfeyl Avwox Am Eof GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600+Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 Itjdpsyl Avqsfx Am Esf DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB DSQC679 IRC5 Teachpendant,20% discount at order more then 1 unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Itjdoyl Avkspfx Am Eof

Condition: excellent (used), 3HAC085598-001 SxTPU4 (für IRC5) Itsdpjyhxqmsfx Am Eof DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front Ijdpfjwtb Rqox Am Ejtf • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, mileage: 300 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Iodpfx Amoy D Dapo Eotf Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Itedpsy D Daiefx Am Esf Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Itsdpfx Amsy D A U Sj Eef Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 300 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components Itjdpjy D Dacofx Am Esf New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the upgraded safety and performance test package “P Plus.” This is not a standard laboratory incubator, but rather a high-end safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. The device is fully functional and has been tested. It originally sustained a transport-related housing damage, which has been professionally repaired and repainted. Technically flawless – visually in very good condition 100% operational – no limitations Price advantage: €1,000 cheaper than comparable units Special Value Added: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR hazard level 5 (fire/flames, no explosion). What exactly can the device do? (Item 2 – Performance & Application) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles at temperature) - Long-term temperature runs and thermal cycling tests - Testing of unpowered and cyclical powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / E-mobility / Energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical and acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection inside chamber - Exhaust port with reversible overpressure valve - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual trigger of suppression system - Cable feedthroughs for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, but without explosion or uncontrolled propagation. This is not an abuse or destruction testing device, but a compliant, safe test chamber for real-world operational and fault scenarios. Technical Key Data: Temperature range: –10 °C to +100 °C Internal volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. overall load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50 / 60 Hz Phase: single-phase Isdpfxjyyw E Re Am Eetf Power consumption: approx. 2.1 kW Fusing: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this device is special: - Genuine battery safety test cabinet - EUCAR hazard level 5 capable - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale value Weight: approx. 285–300 kg Documents & Downloads Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors reserved!) Further questions? Please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Iedsyyvwxjpfx Am Eetf Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Ijdpfxoyyvrvs Am Eotf Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: RDX-500-071501, laser wavelength: 532 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, type of input current: three-phase, overall weight: 750 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,850 mm, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 100 mm, Equipment: documentation/manual, type plate available, This ultrashort-pulse laser processing station (Pulsar Photonics RDX 500) is currently in operation. It ist used for ablation/patterning of transparent conductive coatings (e.g., ITO) and for precision glass cutting. A system demonstration can be arranged upon request. Itodsx Uzwgopfx Am Eef In its current configuration with an 532 nm (green) laser, the machine is also suitable for applications in the field of microstructuring and micromachining. Our partners can develop the specific parameters for your usecase. The replacement value of this machine is around 415 000 €

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, Iedpjxaal Rsfx Am Estf dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment • Variable speed • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Ijdpfx Amev Hr D No Ejtf Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Dimensions (L)1168mm x (W)493mm x (H)990mm

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Itedpfx Asy D E Tdom Esf

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Itsdsyyw T Uspfx Am Eof Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Condition: new, machine/vehicle number: Baureihe GSP, When shredding long pipes and profiles, conventional granulators face significant challenges. In most cases, pits or platforms are required to feed the long and bulky parts. This is why ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long pieces can be easily fed, and the risk of blockage is eliminated as the machine meters the material automatically. When the grinding chamber is overfilled, no further material is accepted until the machine can operate again without overloading the motor. Itedpfx Ajyr Thkom Esf ZERMA also offers a wide range of options such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Isdpfsyr Tg Tjx Am Eetf Injection molding Thermoforming Blow molding Recycling Extrusion Waste