Used Müller Cez 160.5.8 for sale (1,129)

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, color: orange, Further information: Main and auxiliary frames made of high-strength double-T profiles, grade ST 52.3, 4-longitudinally profiled, with high-webbed front and rear end closures as well as cross members. Frame behind the bogie with a gradually tapering offset and a 0.8m long rear ramp. Lowest possible ground clearance through recessed wheel wells above the rear wheels. Front corners of the bogie platform chamfered at 45 degrees. Two recessed lashing rings each on the bogie platform and the ramp for attaching tensioning devices. Rear end with wide bearings for the 6-point supported ramp shaft. Side protection with a protective strip according to EC, chocks with clamping lock. Low-maintenance tapered roller bearing axles with automatic adjustment, two-circuit air brake system according to EC and parking brake. Bogie and drawbar: Made of double-T profiles in welded construction with a ball swivel joint. Drawbar standard length 1500 mm, with 8 eyelets, 50 mm in diameter. Drawbar support with threaded spindle as a height adjustment device. The vehicle does not have axle compensation! 24 Volt, 2 connection cables, 7-pole, with polarity reversal protection. Large rectangular four-chamber lights including side marker lights and reversing lights, front distribution box, rear outline lights, side marker reflector lights, and holder for a single-line license plate. Bdsdpfji Rixgox Apvsd Underbody made of pine wood, 40 mm thick, pressure-impregnated. Low-loader platform and ramp with cross-laid top layer, 30 mm thick, running longitudinally. Total floor thickness 70 mm. Bogie platform with longitudinally running single floor and recessed, open tool compartment, size L 700 x W 800 x D 180 mm. Ramps: In welded construction with trough sheet, cross members, wooden deck running longitudinally, 50 mm thick. Ramp tips reinforced. Ramp support with tension lock and securing device. Ramps can be shifted by 470 mm on each side, with perforated rail and sliding tube. Ramp shaft made of plain steel. Articulated arm spring lifter with outer and inner springs for easy single-person operation, with automatic floor supports. Steel grit-blasted, zinc phosphate primed, single-color acrylic lacquered in RAL colors, wheels silver. Traffic, light, and metallic colors as well as two-tone paintwork, wood stained.

Condition: used, empty load weight: 7,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2006, loading space length: 9,100 mm, loading space width: 2,750 mm, suspension: air, tire size: 235/75 R17,5, color: grey, Equipment: ABS, Drum brake Payload 22,200 kg Rubber floor Hydraulic double ramps and hydraulic lateral shift Gigant axles Bdodswh Rwvepfx Apvsd Subject to errors and omissions.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10024150, Sewing machine Muller Martini Ventura MC-200, Machine speed* Mechanical of 18 to 200 cycles/min, max. 12 000 cycles/h, min. signature length 120 mm, max. signature length 510 mm, min. signature width 75 mm, max. signature width 320 mm, max. signature thickness 4 mm, Lap opening min. 8 mm, low or high folio lap, Stitches Number of stitches standard 13, staggered 14, Stitch length 16.5 mm with/without blind stitch possible for all stitch types Sewing machine Muller Martini MC 200 Bdodpfxex Rywko Apvod

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm Bdsdpfeyx Impsx Apved table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram

Condition: used, maximum load weight: 31,820 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/1980, loading space length: 9,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 1980, Equipment: ABS, tail-lift, Müller-Mitteltal T4 Low-bed Trailer * SAF axles with drum brakes * Twin tires * Low-bed with extendable loading platform * Hydraulic loading ramps, adjustable (2 units) * Drive-on gooseneck * Additional rear supports * Turntable design ---Dimensions & Loading Platform--- * Loading platform approx. 9,800 mm * Loading platform width: 2,550 - 3,000 mm * Loading platform height: 900 mm --- * Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ---Vehicle number: 11892---Errors and prior sale excepted---Advertising and various lettering have been digitally removed. ---We are happy to assist you with all the formalities involved in purchasing a vehicle; simply inform us of your requirements and suggestions, and we will handle the rest. Among other things, we can offer the following services for an additional fee: Bdjdpey Skl Ijfx Apvsd - Trade-in of your old vehicle - Main inspection (TÜV/SP) - Complete export handling - Financing mediation - Application for export license plates - Vehicle transportation - Vehicle registration - Recovery and vehicle transport ---Your VTS Team

Condition: good (used), Year of construction: 2009, Mueller P7505 Pure steam generator Serial: 394131-1 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph Bedpjw Ha I Iefx Apvsdd

Condition: ready for operation (used), Otto Müller SR 30 High-speed radial drill Drill spindle holder (Morse): 40 mm Longitudinal displacement drill head (X-axis): 750 mm Arm travel height (Y-axis): 450 mm Spindle diameter: 70 mm Max drilling depth: 150 mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer to the left of the machine in the picture Transport possible at more price. Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Bodpfx Apsvilzgjvodd Otto Müller SR 30 Fast Radial Drill Drill spindle mount (morse): 40mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 450mm Spindle diameter: 70mm Max drilling depth: 150mm Speed: 2400 rpm Dimensions: 175x120x235cm (LxWxH) Power supply: 380v Without oil skimmer on the left of the machine in the photo Transport possible at an additional cost. Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 30 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 40mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 450 mm Spindle diameter: 70 mm Maximum drilling depth: 150 mm Speed: 2400 U/min Abmessungen: 175x120x235cm (LxWxH) Power supply: 380 V Ohne Ölskimmer links neben der Maschine im foto Transport gegen Aufpreis möglich. Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: ready for operation (used), Otto Müller SR 23 Fast Radial drill press Drill spindle adaption (morse): 30 mm Longitudinal displacement drill head (X-axis): 750 mm Arm stroke (Y-axis): 350 mm Spindle diameter: 55 mm Max drilling depth: 125 mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new controls, ready to put to work. Transport possible at more price. See also our other ads Also throughout the year we are looking for industrial machines. Do you have redundant machines, mail them to us with pictures and information. Seller is not responsible for typographical or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Otto Müller SR 23 Fast Radial Drill Drill spindle mount (morse): 30mm Longitudinal displacement drill head (X-axis): 750mm Height displacement arm (Y-axis): 350mm Spindle diameter: 55mm Max drilling depth: 125mm Speed: 2400 rpm Dimensions: 175x130x215cm (LxWxH) Power supply: 380v Completely new control, ready to put to work. Transport possible at an additional cost. Also view our other advertisements We are also looking for industrial machines all year round. If you have any redundant machines, please email them to us with photos and information. The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT Otto Müller SR 23 Fast Radialbohrmaschine Bohrspindelaufnahme (Morse): 30mm Length of drilling head (X axis): 750 mm Armhöhenweg (Y axis): 350 mm Spindle diameter: 55 mm Maximum drilling depth: 125 mm Speed: 2400 U/min Abmessungen: 175x130x215cm (LxWxH) Power supply: 380 V Völlig neue Steuerung, sofort einsatzbereit. Transport gegen Aufpreis möglich. Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Bodpfx Ajvilzmopvjdd Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen. Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: used, Year of construction: 1991, pressure 60 t Bdjdpfx Apev Az T Sjvod throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 120 l, inner dimension width: 400 mm, inner dimension length: 930 mm, Müller Mechanik – Vibratory Finishing Technology – MADE IN GERMANY – Our trough vibrators replace manual deburring and grinding processes. In the future, avoid time-consuming and costly manual work! With the trough vibrators from Müller Mechanik, you will achieve reproducible processing results of high quality. MMTV-9341 – Technical Data: - Usable volume: 120 dm3 - Trough internal dimensions: 930 x 410 x 510 mm - Wear-resistant coating: Polyurethane, 18 – 20 mm - Maximum payload: 400 kg - Empty weight: approx. 490 kg - Operating voltage: 3N ~ 50 Hz 400 / 230 V - Connected power: 1.5 kW - Motor rated speed: 1,500 min-1 - Speed control stepless via frequency inverter Bdodpofid Tcofx Apved

Condition: new, Year of construction: 2026, functionality: fully functional, usable tank capacity: 20 l, inner dimension width: 200 mm, inner dimension length: 520 mm, Müller Mechanik – Vibratory Finishing Technology – MADE IN GERMANY Bsdpfx Apefid Sqevsdd Our trough vibrators replace manual deburring and grinding processes. Avoid time-consuming and costly manual operations in the future! With the trough vibrators from Müller Mechanik, you will achieve reproducible processing results of high quality. MMTV-5321 – Technical Data: - Useful volume: 20 dm³ - Max. payload: 80 kg - Motor speed: 1500 rpm - Polyurethane wear coating, seamlessly cast, wall thickness 10-12 mm - Operating voltage: 3N ~ 50 Hz 400/230 V, connection power 0.25 kW - Empty weight: approx. 68 kg - Process control, switching range: 1 min - 99h 59 min - Dosing pump control, switching output: 230 V ~ 50 Hz max. 2 A

Condition: good (used), Manufacturer: MÜLLER MARTINI, year of manufacture: 1994, serial number: 94.00398.01 Bjdpjy Ez Umjfx Apvodd

Condition: used, maximum load weight: 6,940 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 11/2026, loading space length: 5,360 mm, loading space width: 2,470 mm, loading space height: 350 mm, total width: 2,550 mm, Equipment: ABS, Equipment: * 40 mm jaw coupling * height-adjustable drawbar eye * drop-down side walls * storage box Bodpfx Aey Si Etopvedd * removable rear wall * drawbar eyes * BPW axles * galvanized Other information: * 1 previous owner * German first delivery * Downrated from 11.9t to 10.0t without technical modifications Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim, near Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide an individual quote! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Our offer is always WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional charge. All information in advertisements, online content, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment should be checked separately if necessary. Subject to errors and prior sale.

Condition: used, Year of construction: 2000, machine/vehicle number: 510565, functionality: fully functional, operating hours: 5,840 h, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype Bedpfxoxvqnbo Apvsdd We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Bdodpfeyx Im Aex Apved Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l Bedpfxjyx Il Es Apvsdd power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 Bodpfx Apswvva Sevedd with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t Bjdpfxovuukbe Apvodd dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1989, pressure 100 t Bdsdpfx Ajvuk Naepvsd distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA)

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m Bdjdpfxovuufls Apvjd year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1800 x 1000 mm table height over floor 900 mm Bedpfovuubmex Apvjdd die cushion pressure in table 80 t die cushion stroke in table 100 mm Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s working speed 15 - 80 mm/s oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram Bodpfx Apsvut Tbjvodd

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm Bdodpfxovut Ryj Apvsd die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm Bedsvut H Iopfx Apvodd yom 1980 - Modernization of control (Siemens S 7) in 2004 with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Bedovcqanepfx Apvsdd Terms of delivery: ex location