Used Machpro Mps330 | 2024 for sale (1,464)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Podpfx Agezcuyis Tjgn Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Pgjdpfx Aezcwylog Tsn Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Model - SILVER 16/16 (16 x heads). Podpoulpmzefx Ag Tsgn Serial number - 528. Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until 14/10/2024, can be viewed working until this point.

Condition: excellent (used), Year of construction: 2024, 2024 Nakamura-Tome AS-200L Twin Spindle, Driven Tooling, 'Y' Axis Multitasking CNC Slant Bed Lathe with Nakamura Fanuc Control Podpozfqdzsfx Ag Tegn Dual Forkardt 3FNC+G 215 66 Z6 Ø215mm 3 Jaw Power Chucks. Maximum Swing Over Bed Ø400mm. Maximum Turning Ø280mm. Standard Turning Ø190mm. Maximum Distance Between Spindles 800mm. Maximum Turning Length 570mm. Bar Capacity Ø65mm. Axis Travel 'X'=212.5mm, 'X1'=200mm, 'Z'=585mm, 'Y'=±41mm. Rapid Feedrates 'X'=24m/min, 'Z'=36m/min, 'Y'=6m/min, 'C'=480rpm. Maximum Main Spindle Speed 4,500rpm Stepless (Motor 15/11kW). Through Spindle Bore Ø80mm. Draw Tube Bore Ø66mm. Spindle Nose A2-6. Maximum Sub Spindle Speed 6,000rpm (Motor 7.5/5.5kW). Through Spindle Bore Ø56mm. Draw Tube Bore Ø43mm. Spindle Nose A2-5. Dodecagonal Drum Turret 15 Position. Tool Shank 25 x 25mm. Round Tool Bore Ø32mm. Driven Tooling Maximum Speed 6,000rpm (Motor 5.5/3.7kW), Number Of Milling Stations Per Turret 15, Tool Ø1-16mm, Collet Dimension AR25. Power Supply 23kVA. Run Hours 276. S/No. KL206708 (07/2024). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. With Renishaw Tool Setting Arm in Box, Parts Catcher, Tooling In Turret, Filtermist S800 Mist Extractor, LNS Turbo MH500 Chip Conveyor, Coolant System & Manuals. Approx Dimensions L3,160 x W1,805 x H1,935mm. Weight 6,000kg. NOTE: Tooling Shown In Turret Of Machine Not Included. This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2023, Overview The Duplo DC-618 Slitter Cutter Creaser is a compact yet highly capable all-in-one finishing solution designed specifically for today’s digital print environment. Professionally refurbished by Glendale engineers and presented in exceptional condition, this 2023 model (first installed in 2024) offers a rare opportunity to purchase one of Duplo’s most popular and versatile multifunction finishing systems at a significant saving over new. Designed to eliminate white borders and toner cracking commonly associated with digitally printed applications, the DC-618 combines precision slitting, cutting and creasing in a single automated process. Capable of processing up to 6 slits, 30 cuts and 20 creases in one pass, the system delivers fully finished applications at speeds of up to 23 sheets per minute. This refurbished DC-618 has been prepared to a working ‘as new’ standard and benefits from several new rollers, feed belts, covers, guides and replacement drive components including gears and cogs where required. The machine is supplied complete with PC, monitor, keyboard, mouse and updated software, ensuring it is production ready for immediate installation. Ideal for business cards, greeting cards, brochures, invitations, postcards, tickets and other full-bleed applications, the DC-618 provides exceptional automation, fast setup and highly accurate finishing performance. Key Features Fully automated slitting, cutting and creasing in one compact system Processes up to 6 slits, 30 cuts and 20 creases in a single pass Produces full-bleed applications without white borders or toner cracking Output speeds up to 23 sheets per minute Rotary slitting system with precision guillotine cutter Adjustable depth creasing system for optimised fold quality across varying stock weights Integrated CCD barcode reader for automatic job recall and setup Registration mark reading system compensates for image shift ensuring accurate finishing User-friendly Windows PC interface with unlimited job storage Colour LCD control panel with storage for up to 250 jobs onboard Oversize feed tray and stacker supports sheet lengths up to 750mm Card stacker for efficient collection of business cards and smaller finished pieces Jobs can be edited while running to minimise downtime and improve productivity What’s Included Refurbished Duplo DC-618 Slitter Cutter Creaser Windows PC with monitor, keyboard and mouse Updated operating software New rollers and feed belts Replacement covers and refurbished drive components where required Fully tested and production ready system Why Choose this Duplo DC-618 Professionally refurbished by Glendale engineers One of Duplo’s best-selling multifunction finishing systems Excellent solution for short-run digital print finishing Highly automated setup reduces operator intervention and changeover time Psdpfjzgunysx Ag Tjgn Exceptional versatility for a wide range of commercial print applications Compact footprint combining multiple finishing devices in one system Reliable, accurate and easy-to-use production workflow

Condition: good (used), Lagarde 4 trolley retort. Being removed from factory this month (August 2024). Pgedpjudx Spofx Ag Tjn

Condition: good (used), Continuous hot air oven, protein cooker. Has been cooking poultry portions and burgers etc. Nice condition and in production until April 2024. Podpew Rn T Sjfx Ag Togn

Condition: excellent (used), - Record Scorpion Flow Wrapper Pgodpfx Ageyrfvtj Ten Model: Scorpion E HS Year: 2007 (full overhaul in 2024)

Condition: used, Year of construction: 2024, XYZ 1530VS x 730mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11388443 (2024) Location: These lots are located in Rhayader, Wales, UK. Psdpezgfb Rofx Ag Tjgn

Condition: used, Year of construction: 2024, XYZ 1550VS x 1230mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11308450 (2024) Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Pgodpfezgdz Aex Ag Tsn

Condition: used, Year of construction: 2024, XYZ Proturn RLX425 x 1250mm Gap Bed Lathe with Prototrak RLX Control, Swing Over Bed 480mm, Max Spindle Speed 2500rpm, Spindle Bore 80mm, Tailstock. Serial No. RLX10180 (2024) Pedszgdxnopfx Ag Tjgn Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2024, XYZ RMX4000 Bed Mill with Prototrak RMX Control, Programmable Variable Speed Head, Table Size 1474 x 355mm, Spindle Speeds 40-5000rpm, Power Drawbar. Serial No. RM410077 (2024) Psdpfx Agszgdwde Tegn Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), fuel type: diesel, color: yellow, lifting height: 15,000 mm, axle configuration: 4x4, Year of construction: 2011, operating hours: 2,864 h, Equipment: all wheel drive, Drive: Wheel CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: IT Please contact Vink Machinery for more information Dieci Pegasus 35.16 * 2011 Pgedezg Nykopfx Ag Tjn * Diesel * 15.7 meters lifting height * 13.35 meters horizontal range * 4x4x4 * 3500 kg lifting capacity * 13100 kg own weight * Inspection until May 2024 * including documents

Condition: used, Year of construction: 2021, operating hours: 20,608 h, lifting height: 5,930 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,190 mm, fork width: 1,150 mm, total height: 2,640 mm, total length: 2,470 mm, total width: 1,320 mm, color: red, Empty weight: 3.500 kg Lifting capacity: 3.500 kg - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X387Y02106 - Operating hours: 20608 - Lifting capacity: 3500kg - Lifting height: 5930mm - Overhead clearance: 2624mm - Free lift: 1800mm - Fork length: 1190mm Podpfx Agozg A T Rj Togn - Maximum fork width: 1150mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 3rd+4th valve to fork carriage - Options: Non-marking tires, Joystick, Work lights, Half cabin, Camera, Free-lift - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 5 Pzs 775 - └ Battery year of construction: 2024 - └ Capacity: 775Ah - └ Battery voltage: 80V - Transport dimensions: 2470mm x 1322mm x 2640mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Year of construction: 2024, condition: like new (used), functionality: fully functional, Un-Used Screenbee 13.26 Trommel System Year 2024 20mm Square Hole Mesh Trommel Measures 2m Long x 1.2m Diameter Belt Feeder Cleaning Brush Pjdpfx Aszcqdksg Tjgn Manual Lifting Legs Complete With Control Panel & Plug All The Best Of Components Used. SKF Bearings, Nord Drives, Etc Powder Coated Paintwork Weighs 2,600 kgs

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Podpsy S Rqwofx Ag Togn Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 Pedpfx Aezg Er Njg Tegn TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 15 mm Sheet thickness copper: 4 mm Sheet thickness brass: 3 mm Laser power: 3,000 W Laser model: TruDisk3001 (4C) MACHINE DETAILS Control type: CNC Last documented maintenance: 10-12 Sept 2025 Operating hours (as of 09/2025): 53,082 h (currently approx. 54,000 h) Dimensions & Weight Space requirement: 9,300 x 4,700 x 2,200 mm Machine weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction system Operating manual Chiller + extraction system Compressor not included Note: Transporting the machine requires 1 standard truck and 1 truck with a width of 3m.

Year of construction: 2024, condition: ready for operation (used), functionality: fully functional, Rational Icombi Classic 10x 1/1GN, Pgsdpszhmcxefx Ag Tjn - 400V - Year of manufacture: 2024 - Dimensions: 860x780x1780 mm - Power: 19.9 kW

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Pedpfx Aozbrv Esg Togn Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 75,406 km, power: 74 kW (100.61 HP), fuel type: gasoline, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,060 mm, first registration: 03/2023, fuel tank capacity: 60 l, CO₂ emissions: 164 g/km, emission class: euro6, color: blue, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, traction control, = Additional options and accessories = - Sliding door, right side - Heated exterior mirrors - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Electronic brake force distribution - Euro 6 - Driver airbag - Remote central locking - Hill-start assist - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Multifunctional steering wheel Psdpfx Aozhl H Asg Tegn - Fog lights - Emergency brake assist - Radio - Radio with DAB - Start/Stop system - Immobilizer - Bumpers in body color - Windshield heating - Partition = Further information = General information Number of doors: 5 Model range: May 2018 - Apr. 2024 Cabin: standard Technical information Torque: 170 Nm Number of cylinders: 3 Engine displacement: 999 cc Transmission: 6 gears, manual transmission Dimensions Length/Height: L2H1 Dimensions (L x W x H): 486 x 185 x 186 cm Weights Unladen weight: 1,454 kg Payload: 721 kg GVWR: 2,175 kg Max. towing capacity: 1,200 kg (750 kg unbraked) Interior Interior: black Fuel consumption Average fuel consumption: 7.1 l/100km Maintenance, history, and condition Service booklets: Available APK (Technical Inspection): valid until 04.2027 Number of keys: 2 (1 remote control) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: excellent (used), Year of construction: 2024, turning length: 830 mm, turning diameter over cross slide: 720 mm, spindle motor power: 35,000 W, spindle bore: 115 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, rotational speed (max.): 2,800 rpm, CNC Lathe with c-axis DOOSAN - PUMA GT3100M MACH-ID 9658 Make: DOOSAN Pjdpfxszfgrzo Ag Tegn Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Part catcher Cromar chip conveyor Tool eye probe CROMAR Chip conveyor Samchully Chuck 380 mm 5 BMT Tool holders Max. turning Ø: 720mm X-Axis: 260mm Z-Axis: 830mm Spindle bore: 115mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 12 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 139,972 km, power: 74 kW (100.61 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 137 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,560 mm, total width: 1,850 mm, total height: 1,870 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Registration number: V-88-NNR Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.517 kg Carrying capacity: 658 kg GVW: 2.175 kg Interior Interior: black Consumption Average fuel consumption: 5,1 l/100km (55 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 12/2026 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Heated windscreen - Height adjustable driver's seat Pgsdpfx Agsxf Tw Dj Ten - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander Psdpfx Ajxz Ialjg Tegn - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: new, axle configuration: 3 axles, loading space length: 12,500 mm, loading space width: 24,800 mm, total length: 130 mm, total width: 24,800 mm, color: white, Year of construction: 2024, = Additional options and accessories = - Transportation = Remarks = = Additional options and accessories = - Leaf spring suspension = Remarks = The CIMC 3-axle Flatbed Semi-Trailer is a robust and versatile trailer designed to transport large, heavy or irregularly shaped loads. With three axles, this trailer offers excellent stability and carrying capacity, which is essential for transporting construction materials, machinery, containers and other heavy loads. CIMC is known for its innovative designs and reliable products, and the 3-axle Flatbed Semi trailer is no exception. Specifications: - Number of axles: 3 axles for extra stability and higher load capacity. - Load capacity: Up to 60,000kg for various purposes. - Chassis: Made of high-quality steel for maximum strength and durability. - Superstructure: Flat floor without raised edges. - Suspension system: Mechanical or air suspension systems for a stable ride and better load distribution. Features and benefits: High load capacity: - The 3-axle configuration provides excellent weight distribution and increases load capacity. - Ideal for heavy and bulky loads such as construction machinery, containers, and industrial equipment. - Durable construction: The chassis is made of high-grade steel, enabling the trailer to withstand tough conditions of daily use. - Advanced welding technology ensures a sturdy and reliable construction, significantly extending the trailer's service life. Applications: The CIMC 3-axle Flatbed Semi-Trailer is ideal for various applications such as: - Construction sector: Transportation of heavy construction materials, machinery and equipment - Logistics and distribution: Transport of containers, pallets, and irregular loads - Oil and gas industry: Transport of heavy and bulky equipment - Automotive industry: Transportation of vehicles and large machinery Dimensions: L. 12500mm W. 2480mm H. 1200mm Weight 8,400kg+- 5% This CIMC 3-axle Flatbed Semi-trailer offers a robust and flexible solution for companies in need of a versatile and reliable trailer for transporting heavy and irregular loads. Excellent stability, durability and the ability to adapt to specific loads make this trailer a valuable addition to any fleet. Only for export outside the EU. = More information = Tyre size: 315/80 R 22.52 Make of bodywork: CIMC ZJV9403JP General condition: very good Technical condition: very good Visual appearance: very good Damages: none = More information = Pedpfx Agey Rt R Dj Togn Year of manufacture: 2024 Empty weight: 8.400 kg Carrying capacity: 60.000 kg GVW: 68.400 kg Selling price: € 24.900, US$ 28.370 Tyre size on axle 1: 315/80 R 22.52 Tyre size on axle 2: 315/80 R 22.52 Tyre size on axle 3: 315/80 R 22.52 Rent kmly price currency: EUR

Condition: new, mileage: 1 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels = Additional options and accessories = - All wheel drive - Leaf spring suspension - Passenger seat - PTO - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is a high-quality refrigerated truck, designed for the safe and efficient transport of temperature-sensitive goods in various terrain conditions. With its powerful 4x4 drive, durable build quality and advanced cooling technology, this vehicle is ideal for both urban distribution and deliveries in remote areas. Specifications Mercedes-Benz Atego 1725 4x4 Refrigerator Truck: - Drive: 4x4 configuration, perfect for difficult-to-reach locations or terrain. - Maximum gross vehicle weight (GVW): 17 tons, suitable for medium to large loads. - Suspension: Robust suspension with high ground clearance for a smooth ride Engine: - Power: 245 hp (180 kW). - Torque: 900 Nm for excellent performance under tough conditions. - Transmission: Mercedes PowerShift automatic gearbox for smooth shifting and efficient fuel consumption. Cooling structure: - Cooling unit: High-quality unit with a range from -20°C to +10°C, depending on the load requirements. - Insulation: Double-walled insulated panels to ensure a constant temperature. - Capacity: Varying between 20 m³ and 30 m³ loading space, depending on the configuration. - Doors: Each door has 3 stainless steel hinges and external locks. Advantages: - Versatile use: Suitable for the transportation of perishable goods such as meat, dairy, fish, vegetables and medicines. - Excellent off-road capabilities: Thanks to the 4x4 drive, this refrigerated truck allows you to make deliveries in difficult-to-reach regions. - Energy efficient: The cooling unit and motor are designed for efficiency, which reduces operating costs. - Reliable temperature control: Optimal conditions for your goods thanks to precise temperature control and high-quality insulation. Applications: The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is ideal for: - City distribution of fresh and frozen products. - Agricultural transport of freshly harvested products to markets. - Logistics operations in remote or difficult to reach areas. - Pharmaceutical deliveries requiring strict temperature control. The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck offers an excellent balance between performance, reliability and efficiency, guaranteeing that your goods always arrive in perfect condition. Cool unit brand: Carrier = More information = Cab: day Tail lift: DLP DLP 5003, tail lift, 1500 kg Make of bodywork: Carrier Oasis 250 Cooling unit Wall thickness: 6 mm General condition: very good Cool unit make: Carrier Cargo space outer length: 500 cm Cargo space outer width: 250 cm Cargo space outer height: 200 cm Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Psdpfsy Rt Ucjx Ag Tsgn Selling price: € 114.900, US$ 130.900 Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg