Used Menn Thread Rolling Machine - Flat Die for sale (73,132)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Bjdpfx Abeza E Rmj Djdg

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Bdsdpfx Absyxq Ucs Djg

Year of construction: 2025, condition: ready for operation (used), A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible. Bodpfxewihz Is Ab Dsdg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 400 kg, controller model: AGIEMATIC T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Bdodpfx Abezpypne Deg Travel in Y-axis: 250 mm Travel in Z-axis: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Working area Table size: 600 × 450 mm Workpiece dimensions max.: approx. 860 × 620 × 350 mm Workpiece weight max.: 400 kg Electrode weight max.: 100 kg Working tank (internal): approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control system: AGIEMATIC T Generator: AGIEPULS 60 Power connection: 400 V / 50 Hz Dimensions & weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Bdodpjztckijfx Ab Dog Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Bsdpfohmmfkjx Ab Djdg Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Bdjdpfx Aoxpqy Dsb Deg Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Bdsdpfoya Iaqsx Ab Djg Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Control : Siemens Sinumerik 840D SL Bjdpfx Aeulghcjb Djdg Accessories available: - various grinding wheel holders - Lifting pump for cooling lubricant - Various spare parts for machine, machine documents - Magnetic table 2000 x 250 mm incl. clamping hydraulics - Machine hours: 8,000 h (since 2018) - Table dresser: Dittel brand - Grinding head: manually swiveling Machine length 6.6 m Width 2.8 m Height 2.5 m Weight 14'000 kg Drives Siemens

Year of construction: 1987, condition: good (used), Reform SPW 30 CNC – High-performance grinding machine (roll grinding machine) Bdodpfxjbq A Hue Ab Dsg Machine number: 3728-87 Year of manufacture: 1987 Grinding length: 2,000 mm

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength Bdsdozwuu Ujpfx Ab Djg CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original

Condition: new, Year of construction: 2025, 134 NEW Rondo Dough Roller - Tabletop Dough Roller TECHNICAL DATA: - Foldable stainless steel arms, - Roller opening 0.3 – 30 mm, - Motorized conveyor belts, - Roller diameter 84 mm, Bdjdpfxjxbdy Is Ab Djg - Easy-to-read scale with dough thickness switch, - Roller length 500 mm, - Scrapers can be removed without any tools, - Outfeed belt speed 50 cm/sec, - Separate start and stop buttons. Dimensions (in operation): 1560 x 965 x 500 mm, - Safety guards. Dimensions (in standby): 810 x 965 x 710 mm, - Finger guards. Power: 0.75 kVA, - Easy-to-clean cotton belts, - Flour container, - Power supply: 3 x 200 – 460 V. 50/60 Hz, - Weight: 80 kg, EXTERNAL DIMENSIONS (in cm) - Length: 156, - Width: 96.5, - Height: 50. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers Bsdezwpxnspfx Ab Djdg – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) Bodpfxszkbn Is Ab Dedg - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. Bdsdpfxsyx A Uuo Ab Djg -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Bsdpfoy Tl Rbjx Ab Djdg

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Bdedpfszv Niqsx Ab Deg The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Year of construction: 2005, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 315 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 576 mm, workpiece width (max.): 400 mm, table load: 500 kg, Equipment: documentation/manual, We are offering this well-maintained Zimmer+Kreim 600 wire EDM machine, manufactured by Zimmer&Kreim in 2005, for sale. Manufacturer: Zimmer+Kreim Model: 600 Year of manufacture: 2005 Condition: good Category ID: 1901 Bjdpfx Abozufdzj Dedg Type ID: 1429 Machine type: Wire EDM machine Zimmer&Kreim If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: not inspected (used), machine/vehicle number: 23095, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, input voltage: 380 V, input current: 17 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power supply: 3~ Frequency: 50 Hz Bedszt Sfpepfx Ab Dsdg Operating voltage: 380 V Control voltage: 220 V Rated current: 17 A Fuses Rated current main fuse, fast-blow: 35 A Rated current main fuse, slow-blow: 25 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 2,100 x 2,000 mm Machine weight: approx. 4,500 kg

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Y axis working area: 2200 mm Working Table: Flat table Bsdpfxey Nkrve Ab Dedg Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT12121003, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Bodpfezm Tbrex Ab Dedg Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Year of construction: 1987, condition: used, Tapping machine, pipe thread cutter Bdjdpfeficzdsx Ab Dog -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg

Condition: used, Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts Bodpfx Ajfipc Tjb Dedg -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Bsdpfx Aob A Iwcob Dsdg -for: Pipe size max. 2 inches -Cutting jaws: 2" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes Bdedpfx Asb A Iyaeb Dog -Dimensions: 550/360/H240 mm -Weight: 55 kg