Used Metrios Optical Measuring Machine for sale (69,164)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Ijdpfjzcqy Eex Acfsti Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT • Weight: 40 kg Itedpsih R Uxofx Acfoi Accessories: ----- • Manuals • As-delivered condition (Datasheet attached)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Iodpfx Acjy R Taxsfoti Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 00059, measuring range X-axis: 1,500 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,000 kg, Equipment: type plate available, Motorized measuring machine, DEA MISTRAL type. DEA RC1 NEW electronics. Automated, indexed measuring head: RENISHAW PH10M + PAA1 + 1 complete measuring probe with 2 magnetic modules. PC-DMIS CAD DCC software license (mathematical data management with DXF-IGES-DWG-STEP-STL import). Personal workstation + 22" monitor. Desk. Isdpfx Aozdfg Necfoti Set of styli and extensions. Calibration sphere. Filter unit.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Profile projector Werth Optimus 300 IL Evaluation unit HEIDENHAIN Metronics Quadra-Chek 100 Itsdpfx Acszg Nqiofei

Condition: like new (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,800 kg, total height: 3,150 mm, total width: 3,255 mm, total length: 1,600 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, overall weight: 4,500 kg, table width: 1,475 mm, table height: 700 mm, table length: 2,830 mm, feed length X-axis: 900 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 800 mm, table load: 1,800 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 1,800 kg, Machinery purchased in 2022 and used for only 250 hours, offered for sale due to business closure. Itsdpfxozdnw Ns Acfei In like-new condition. Technical specifications are attached.

Condition: good (used), Year of construction: 2022, Equipment: type plate available, Technical Data - KEYENCE WM 3000 Additional Equipment - Measuring head WM 3000 - USB cable - Power supply - Measuring probe WMP3000 Iodpfxew Sviqj Acfjti - Probe tip Ø 5 mm - Calibration device - Tripod - 3D-CAD additional software - Transport case - 4x batteries for measuring probe

Condition: good (used), Year of construction: 2019, functionality: fully functional, Equipment: type plate available, Technical Data - KEYENCE XM-1000 Additional Equipment • Measuring head incl. 1 probe with probe tip (4mm) • Measuring head incl. 1 probe with probe tip (4mm) • CAD add-on software • Extension cable • Mouse, keyboard and user manual in English and German Additional Information Machine Benefits o Technical machine benefits: Itodpsw Svc Defx Acfei Can be tested on site.

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Ijdpfey T N H Tsx Acfoti

Year of construction: 1993, condition: good (used), Measuring Range X – axis 700 mm Y – axis 1500 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Itsdpfx Acegvg I Tsfji Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1 manual, PH9 or PH10M as option Probesystem Renishaw TP200 Computer Windows XPP Workstation Software MCOSMOS-1 V2.4

Condition: excellent (used), – Mitutoyo dial test indicator, model 513 454 – accuracy 0.01 mm – lever type (test indicator) – antimagnetic version – Made in Japan – Mitutoyo magnetic base – model 7011SN – ON/OFF lock – robust, stable, with precise clamping mechanism – Made in Brazil Itsdpfx Aow Rdi Ajcfoi – The set is fully functional. Stable guidance and precise readings. – Ideal for tool setup, run-out checking, and inspection measurements.

Condition: ready for operation (used), Year of construction: 2020, General Data Itodex D Hvqjpfx Acfei Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring

Condition: good (used), Year of construction: 2010, Technical Specifications Manufacturer: Werth Messtechnik GmbH Model: Video-Check 800x400x200 3D Year of manufacture: 2010 Measuring range: 800x400x200 mm Control system: Operator console with joystick and function buttons Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A Camera: High-resolution video technology Probes: Renishaw measuring probe Multi-sensor technology: Combined optical and tactile measurement Construction: Solid granite base SCOPE OF DELIVERY Includes, among others (list not exhaustive): • 3D measuring machine Werth Video-Check 800x400x200 • Operator console with joystick and function buttons • Probes Exact scope of delivery as per photo documentation Itedpfxexfly Dj Acfji The Werth Video-Check 800x400x200 is a high-precision 3D measuring machine for versatile applications in quality assurance. With its large measuring range of 800x400x200 mm, it is suitable for small to medium-sized components. The machine features multi-sensor technology that allows both optical and tactile measurements, offering maximum flexibility. The robust granite construction ensures the highest measurement accuracy and long-term stability. Thanks to the Renishaw probe, video camera, and convenient control via operator console, complex measuring tasks can be performed efficiently and reliably. No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2010, 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC TECHNICAL DATA Manufacturer: Werth Model: Video-Check-IP 400×200 3D CNC Function: 3D Coordinate Measuring Machine Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 250 mm Max. workpiece weight: 30 kg Drives: Ball screw drives with servo motors Measuring systems: Incremental scales with 0.1 µm resolution Guides: Precision ball guides on all axes Illumination: Transmitted light, bright field and dark field reflected light with LED Optics: Zoom optics with zoom factor 0.2x–100x Camera: High-resolution CCD black-and-white camera Electrical connection: 230 V AC, 50 Hz Ijdpfxexfluuo Acfeti Current consumption: max. 10 A Power: max. 1.5 kVA Noise level: < 70 dB(A) SCOPE OF DELIVERY Including (not limited to): 3D Coordinate Measuring Machine Werth Video-Check-IP 400×200 3D CNC Control panel Probes Fiber optic and reference standard sets Exact scope of delivery according to photo documentation The Werth Video-Check-IP 400×200 3D CNC is a high-precision coordinate measuring machine for optical and tactile metrology. With a measuring range of 400 x 200 x 250 mm, it offers versatile application options for quality assurance of a wide variety of components. The combination of high-resolution CCD black-and-white camera, powerful zoom optics and LED lighting ensures precise image capture and reliable results. Precision ball guides and servo drives guarantee high repeatability. The device comes with extensive accessories and is ideally suited for precise 3D measuring tasks in industrial and manufacturing environments. No guarantee is given for the correctness, completeness or currentness of the information provided.

Year of construction: 2010, condition: excellent (used), Werth Scope Check 400 multi-sensor coordinate measuring machine Year of manufacture: 2010 Itsdpfonk U E Aex Acfji X-axis: 400 mm Y-axis: 200 mm Z-axis: 200 mm Max. Measuring piece weight: 20 kg Max. Measuring piece height: 200 mm No responsibility is taken for the correctness, completeness and topicality of the information.

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Itsdpfx Acovffcpjfsi Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: P20109164, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,300 kg, warranty duration: 6 months, total height: 3,328 mm, total width: 1,965 mm, total length: 3,300 mm, overall weight: 5,600 kg, Machine parameters The machine features a granite worktable and axes mounted on air bearings. Measuring range of individual axes X-axis: 2000 mm; Y-axis: 1500 mm; Z-axis: 900 mm Machine dimensions Length: 3300 mm; Width: 1965 mm; Height: 3328 mm Ijdpfszdnqpex Acfoti Weight: Machine: 5600 kg, max. weight of measured part: 2300 kg Sensing system RENISHAW PH10 sensing head RENISHAW TP20 measuring probe – Alternatively, the machine can be equipped with a Kreon laser scanning head or other components. Software and accessories With the sale of the machine, we will provide an up-to-date license for the Metrolog software and, if necessary, other accessories, according to the customer's additional requirements.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, in very good condition, fully functional. Smoke-free environment, no damages. ✅ Technical Specifications: Magnification: 0.1× to 5,000× (current configuration up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8" CMOS Frame rate: up to 50 images/sec Depth of field: High depth of field even in live image Measurement functions: 2D and 3D measurements (angles, areas, volumes, roughness) Itodpsxtbpdjfx Acfoi Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg ✅ Special Features: Fully automatic image acquisition and measurement Observation from various angles without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of Delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g., VH-Z20T, VH-Z250T) Power supply and cables Original software 🚚 Shipping & Collection: Collection by prior arrangement

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools Itsdpjzdz S Tefx Acfji PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 196-477 NL, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Machine in excellent condition from a measuring room Iodoyxxphjpfx Acfoti

Condition: excellent (used), Year of construction: 2020, Measuring head: LM -1100 Image sensor: B/W CMOS, 1", 20 megapixels Display: 10.4" LCD monitor (XGA: 1024x768) Measuring mode with wide field of view: 225 x 125 mm Itsdpfx Acsywk Nqsfoi High-precision measuring mode: 206 x 106 mm For further data, please refer to the PDF file!

Condition: ready for operation (used), Year of construction: 2015, Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Itedpfx Ajy R Dr Escfoi

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included Itedpfxsx D Nrhe Acfei This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Itedpsxbpgtjfx Acfsi Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: not inspected (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 400 mm, table width: 730 mm, table length: 1,170 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 650 mm Z-axis travel: 400 mm Table dimensions (L x W x H): 1,170 x 730 x 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 1,100 mm x 2,300 mm Machine weight: 900 kg EQUIPMENT Granite inspection plate Manual control Documentation and CDs External reference: Lot 9 Itedpjyr H Drofx Acfoi