Used Nakamura-Tome Wt-100 for sale (23,070)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Ppedpexc Syrsfx Aprst Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 417 CDI, downrated to 3.5t, with Rockstroh Drain Jet 100-1 High-Pressure Flushing System Internal number: #508 Rockstroh Drain Jet 100-1 * PTO from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters / minute at 210 bar (38KW) * Pressure control and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Dry-run protection * Electric filling system with overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights Ppsdpfxezah Hdo Aprjt * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with slip-resistant surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary), 3-button remote control for central locking, 13-pin trailer socket, 1-pole battery isolator switch, Driver Assistance System: traffic sign recognition, Suspension: stabilization level III, Electric parking brake, All-weather floor mats, Vehicle without lashing eyes, Transmission lock for PTO, Front cup holders, Grab handles A-pillars, Additional main key, Rear doors (270° opening angle), Folding cover for storage compartment, Terminal strip for electric connections (under driver's seat), Comfort lighting for passenger/cargo area, Dashboard loading package (additional USB ports and 12V outlet), Cable duct at rear portal, Cable duct on side wall, Navigation system for MBUX multimedia, PTO 2B with output shaft, Programmable special module, Crossmember for tow bar, Crossmember with integrated step, Comfort passenger seat, Comfort driver seat, Sender for auxiliary heater, Separating relay for additional battery, Reinforced front axle, Preparation for transmission oil cooling, Perm. GVW 3.88 t, Soft close for right sliding door Additional features: 3rd brake light, Overhead storage above windshield, Storage compartment under dashboard on passenger side, Adaptive brake light, Passenger airbag, Driver airbag, Acoustic package, Hill-start assist, Trailer coupling: electric for trailer socket, Electrically folding exterior mirrors, Electrically adjustable and heated exterior mirrors both sides, Exterior mirrors with blind spot assist, Outside temperature display, DAB tuner (digital radio reception), Ceiling light in cargo area with door contact, Automatic headlight activation, Entry handle at rear right pillar, Entry handle for sliding door on cargo partition, Driver Assistance System: turn-assist, Active brake assist, Active lane keeping assist, Start information assist, Attention Assist (fatigue detection sensor), Intelligent speed assist, Breakdown management assist, Crosswind assist, Digital tachograph, 250 A alternator, Body/build: standard van, Cluster instrument with color display, Communication module (LTE) for digital services, Fuel tank: main tank 93 liters, Continuous cargo partition, Multifunction steering wheel, Truck certification, Side marking lights, Mercedes-Benz emergency call system, Engine 2.0 liter - 125 kW CDI CAT, Multimedia...

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, +++ Buy +++ Lease +++ Rent +++ Mercedes Benz Sprinter 417 CDI downgraded to 3.5t with Rockstroh Drain Jet 100-1 High-Pressure Jetting Installation Psdpfxjy Ac Ipj Aprspt €1,707.09 per month plus VAT, 60 months term, 40,000 km per year, business customers only Internal Number: #560 Rockstroh Drain Jet 100-1 * Power take-off from Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000-liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass system * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with slip-resistant surface * Basic set of cleaning nozzles Special equipment: Second battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, single-pole battery disconnect switch, driver assistance system: traffic sign recognition, chassis: stabilization level III, electric parking brake, all-weather floor mats, vehicle without lashing eyes, PTO gearbox lock, front cup holders, A-pillar grab handles, additional main key, rear doors (opening angle 270 degrees), flip-top storage compartment, terminal strip for electric connections (under driver seat), comfort lighting in passenger/cargo area, dashboard loading package (additional USB ports and 12V socket), cable duct at rear portal, cable duct at side wall, navigation system for MBUX multimedia system, PTO 2B with intermediate shaft, programmable special module, crossmember for trailer hitch, crossmember with integrated step, driver’s cab seats: comfort passenger seat, driver's seat comfort, fuel sender for auxiliary heater, cutoff relay with additional battery, reinforced front axle, pre-installation for transmission oil cooling, permissible gross weight 3.88t, soft-close aid for sliding door right Additional equipment: Third brake light, storage compartment above windshield, storage below passenger dashboard, adaptive brake light, passenger airbag, driver airbag, acoustic package, hill start assist, trailer hitch: electrics for trailer socket, electrically folding mirrors, electrically adjustable and heated mirrors (both sides), mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio), roof light in cargo area with door contact, automatic headlights, entry handle on rear right C-pillar, entry handle for sliding door at partition, assistance systems: turn-off assist, active brake assist, active lane keeping assist, start information assist, Attention Assist (drowsiness detection), Intelligent Speed Assist, breakdown management, crosswind assist, digital tachograph, 250 A alternator, speed limiter 90 km/h, body: standard panel van, instrument cluster with color display, LTE communication module for digital services, fuel tank: main tank 93 liters, full partition wall, multifunction steering wheel, truck registration, ...

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 995 mm, total length: 870 mm, total height: 1,300 mm, TOP Aroma System Isernhäger A 100 for thermally controlled pre-mixing for the individual production of leavened, steeped, cooked, and flavored dough pieces easy control with a special mixing unit robust technology Connection: 400V, 16A CEE plug Dimensions: 995 x 870 x 1300 mm (W x D x H) Used machine, cleaned & SAB inspected Options: Maintenance contract Delivery service Spare parts box Instruction and commissioning Ppsdpfxjyhznuo Apret Come and visit us!

Condition: used, Year of construction: 2019, groove width 3-100 mm drawing length 750 mm working speed 0-20 m/min boring diameter 10-500 mm cutting speed 0-20 m/min return speed 0-50 m/min carrying capacity 35.000 kg Ppjdpoy Tigtofx Apret Power connection 12,27 kW cutting capacity 40.000 N machine table 500 x 770 mm weight of the machine ca. 2,1 t Equipment / accessories: Original year of manufacture reconditioned in 2019 and equipped with new controler - dividing head - many accessories (grooving knives, tools, various) - Documentation

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 3500 mm Ppedoy U N I Topfx Aprst y-travel 2500 mm total power requirement 44 kW weight of the machine ca. 38 t dimensions of the machine ca. 8,1 x 6,2 x 4,5 m

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 4,278 h, load capacity: 10,000 kg, lifting height: 5,400 mm, free lift: 1,710 mm, fuel type: diesel, mast type: triplex, construction height: 3,008 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Mast Type: Triplex Transmission: Hydrostatic Condition: Ready for use and fully functional Technical Condition: Normal Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Pedpfxsv R Nmce Aprspt Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, 3rd Valve, 4th Valve

Condition: used, Year of construction: 1979, pressure 100 t Ppjdpfjy Tpr Aex Aprjt stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 2024, Technical information Make of engine: - Top speed: 18 km/h Empty weight: 2.600 kg Functional Lifting capacity: 2.200 kg Psdpfx Aewwqb Tsprjpt Identification Serial number: XP5G2S1KKRT044419 Other information Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 Tyre brand: - Transport dimensions (LxWxH): 3.37x1.08x2.34 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 13,740 h, machine/vehicle number: ESF403928, fuel type: diesel, motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.345 kg Generator capacity: 100 kVA Transport dimensions (LxWxH): 2.85x1.1x1.62 Pedpfx Apjtr Hr Ujrept Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 240 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Technical condition: good Front tyres type: solid rubber (bandages) Front tyres size: 16-5-11 1-4 Front tyres condition: 80 - 100% Rear tyres type: solid rubber (bandages) Ppodjylqp Espfx Aprjt Rear tyres size: 16-5-11 1-4 Rear tyres condition: 80 - 100% Battery voltage: 24V Battery capacity: 250Ah Battery year of manufacture: 2015 Battery condition: 60 - 80%

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,064 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits Pedpfx Aoyaaugeprjpt • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 Extra Information Machine still under power

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm Ppsdpfxjwf Rgfe Apret max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: used, x-travel 1.000 mm Pedpjy T Sb Tsfx Aprept y-travel 800 mm z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min table dimensions 1.250 x 800 mm number of tool places 30 Pos. In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Pjdpfx Apjq D E Tcorept Very good condition

Condition: good (used), functionality: fully functional, year of last overhaul: 2022, input voltage: 400 V, DGUV certified until: 06/2027, overall weight: 400 kg, total width: 1,000 mm, total length: 1,250 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Dough mixing machine Werner & Pfleiderer Double conical mixer WP DK 100 Tilting mixing bowl Robust design Flour dust cover Connection 400V, 16A-CEE plug Used machine Ppjdpfx Aju Uakzsprjt More bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Caustic soda dosing machine Drautz RD 100 Compact and robust design One-person operation and easy cleaning Dual-curtain caustic soda application With stripping device Connection 400V, 16A-CEE plug Used machine With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Maintenance contract Service package Salting Delivery service Spare parts box for added security Training & commissioning Visit our wide selection! Ppsdpoxmrbdefx Aprst

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Ppsdpfey Rxrtox Aprst Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 16090455, travel distance X-axis: 850 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 210 mm, table width: 500 mm, table length: 1,570 mm, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 435 mm Z-axis travel: 210 mm Table length: 1,570 mm Table width: 500 mm Main spindle power: 3.8 kW Number of axes: 3 pcs. MACHINE DETAILS Pedpfx Aoy Rxq Ajprept Control: CNC Control manufacturer: Heidenhain Power: 16.0 kW Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,800 x 2,300 mm Transport weight: 3,500 kg Transport packages: 3 pcs. EQUIPMENT Tools included External cooling Documentation

Condition: new, weight 240 kg diameter 800 mm height 930 mm 0 122 l engine output 0,64 kW voltage 380 V work speed 1500 rpm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve Ppsdpfx Apey S D U Njret - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: good (used), Year of construction: 2007, Ref. no.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 Year of construction: 2007 Clamping unit Clamping force: 80 ton Opening stroke: 340 mm Distance between tie bars: 370 x 370 mm Mould height min.: 150 mm Injection unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight: 45 g Injection pressure: 2000 bar Measurements and weight Dimensions: 4,3 x 1,3 x 2,3 m Machine weight: 4750 kg Further information: A Technology That Stands Out in Energy Efficiency: Less Energy, Higher Precision The Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElect's servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatically reducing annual operating costs. Motor System — Siemens MOTICS 3 Main Drive Motor · Water-Cooled Servo Motor The main drive unit that controls all clamping and injection movements with high precision. Plasticising Motor · Water-Cooled Servo Motor Based on the same Siemens MOTICS 3 platform, this motor melts material homogeneously through precise speed and torque control; its water-cooled design ensures stable operation during long-term intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servo motors. Clamping, injection, screw retraction, ejector and plasticising axes all operate under full servo control. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times and minimum mechanical loss compared to hydraulic systems. Ppsdpfx Ajzabkveprot NC4 Control System The keyboard-based NC4 system manages all machine parameters — including injection profile, mould protection and cycle analysis — from a single screen.

Condition: used, Pneumatic cylinder SAD-30/100. Podpfslkcg Hex Apropt

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,150 mm, table load: 4,000 kg, Magnum: powerful machining in machine construction and tool making Sk50 with extremely powerful spindel 50kw Glas scales in X/Y/Z Chip conveyor and coolant system X - Travel: 3500mm Ppsdpfewycmmjx Aprst Y - Travel: 1000mm Z - Travel: 770mm Table Length: 4150mm Table Width: 1000mm Table load: 4000 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 50kW Speeds / ranges: 4500Rpm ATC / revolver: 50 Number of controlled axis:3 Chip conveyor: yes Coolantsystem: yes Length: 8000mm Width: 5000mm Height: 3700mm Weight: 30000kg

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Psdpfx Ajvwcdusprspt Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Pjdpfxerg A N Nj Aprept Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) length 2000 mm width 1600 mm height 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.