Used Nederman Nederman Nom Oil Mist Extractor for sale (7,731)

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Bjdsx U Eyfjpfx Al Ajwu

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Manufacturer: De Dietrich (France) Model: GT 517 Year of manufacture: 1995 Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Heat flow: 761–978 kW Maximum operating temperature: 120°C Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Bjdpfx Ajyntqwsl Aewu Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Condition: used, This listing is for the Malvern CHR6000 + CHR7100 OMNISEC RESOLVE and REVEAL GPC/SEC These units are in full working condition and ready for immediate use What the System Measures The combined OMNISEC RESOLVE and REVEAL GPC/SEC System provides absolute molecular weight, intrinsic viscosity, concentration, and conformational data in a single run. This eliminates the need for calibration standards, improving accuracy and confidence in results. OMNISEC RESOLVE – The Chromatography Module OMNISEC RESOLVE integrates four key components into a single unit: Bwodjychy Ajpfx Al Asu Pump: Delivers a flow rate range of 0.01–10 mL/min with low pulsation (0.15% at 1 mL/min in water), ensuring stable baseline signals. Degasser: Features a low-volume (960 µL) design for rapid solvent exchange, enhancing system productivity. Autosampler: Accommodates up to 192 samples, with temperature control from 4°C to 60°C, suitable for both vials and 96-well microtiter plates. Column Oven: Controls temperatures up to 65°C, supporting up to six analytical columns for optimal separation conditions. This integrated design minimizes baseline noise and enhances measurement sensitivity, particularly for low-concentration or low-molecular-weight samples. OMNISEC REVEAL – The Detector Module OMNISEC REVEAL is an advanced, fully integrated, temperature-controlled multi-detector module that includes: Refractive Index (RI) Detector: Highly sensitive and stable, enabling accurate concentration measurement, even for low-concentration samples. UV/Vis Photodiode Array (UV-PDA) Detector: Measures absorbance at any wavelength from 190 to 900 nm, providing versatile detection options. Light Scattering Detectors (LALS & RALS): Deliver market-leading sensitivity, allowing measurement of molecular weights as low as 200 g/mol and injection masses as low as 100 ng, for highly reliable results. Viscometer: Features automated balancing for precise intrinsic viscosity measurements, with a user-exchangeable capillary bridge to minimize maintenance. The fully temperature-controlled design improves detector stability and overall sample characterization, ensuring optimal performance for sensitive applications. OMNISEC Software The OMNISEC software suite provides: Unified instrument control, data acquisition, and analysis. Calculations for molecular weight (Mn, Mw, Mz), polydispersity, radius of gyration (Rg), intrinsic viscosity, and Mark-Houwink parameters. Support for automated, unattended operation to streamline workflows. Key Advantages Exceptional Sensitivity: Measures molecular weights down to 200 g/mol and injection masses as low as 100 ng. Broad Wavelength UV/Vis Detection: Enables absorbance measurements across 190–900 nm. Superior Stability: Temperature-controlled detectors ensure consistent, high-quality results. Versatility: Ideal for polymers, polysaccharides, and proteins, with multi-detection SEC offering unmatched characterization detail. Integrated Design: Reduced inter-detector volume improves peak resolution and data quality. Accurate Viscosity Measurement: With automated viscometer balancing, ensuring reproducibility.

Condition: used, length 500 mm width 500 mm height 110 mm Bsdpfx Aeyqv Nnsl Aowu base area . mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m Magnetic clamping plate electric with cable The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team

Condition: reconditioned (used), Year of construction: 1990, Motors 2x1.85A 50Hz 380V 2800 rpm Air operating pressure 6 bar 30 spindles D=10 mm mount Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual side adjustment Bodev Nptmjpfx Al Aswu

Year of construction: 2001, condition: used, size 765 x 545 x 95 mm 10 units on stock Bjdpfx Aljvimrys Aowu - price per unit -

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Bjdpovz Az Iefx Al Aswu Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile Bwodovz Uhyepfx Al Aju 2x chip bins á 190l Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Bjdpjv Al Nqjfx Al Aewu Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: used, oil Bwjdjy R Ntujpfx Al Aeu 10W30 fully synthetic Duramax Barrels with 20 liters Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Year of construction: 2021, condition: used, Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor, pallet conveyor, pallet conveyor for horizontal cartoner, packaging machine -Handover: in its current condition as inspected -Control/Drive/Cover: missing -Manufacturer: nomatech, Horizontal Cartoning Machine -Type: BOX 60H Bwjdpfxox Nh Rvo Al Aeu -Submission/Price: complete -Dimensions: 3100/1500/H1640 mm -Weight: 608 kg

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 3,000 rpm, saw blade diameter: 200 mm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter Bwedpfx Ajyrmzqel Aou 10-step helical potentiometer

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Bjdpfx Aoyrnciol Aowu Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: used, Liquid Cooler, Oil Cooler, Etscheid IK-V7, Used Machine Manufacturer: Etscheid Type: IK-V7 Bwjdpsypuc Rofx Al Aju Cooling capacity: 1.8 COP Refrigerant: R134a Electrical data: 400 V; 4.7 kW; 6.5 A Operating pressure: 20 bar Year of manufacture: 2002 Overall dimensions: Length: 900 mm Width: 900 mm Height: 1350 mm Weight: 205 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Suitable for cleaning coolant oil used in carbide grinding. Our solution with an ultra-fine filtration system for grinding oil optimizes your tool production at the highest level. In today’s demanding manufacturing environment, the quality of your products is critical. Our MANTA ultra-fine filtration systems clean your grinding oil at a microscopic level to maximize the performance and service life of your precision tools. Available in a wide range of configurations. Bodpfxjy Anqis Al Aswu

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Bjdpfxsylb Ixs Al Aewu Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Dust extraction and filtration system, Nedermann Type 663 Bedpfx Alsiyyxcj Aewu with 2 extraction arms In very good condition, directly from production!!!

Year of construction: 2020, condition: like new (used), !!! We have three units is stock. Price is for one unit only !!! Taiwan Advanced Nanotech TANBead Nucleic Acid Extractor Maelstrom 9600 Excellent working used condition. Includes all pictured components only. Maelstrom 9600 is an automated nucleic acid platform designed for high-throughput applications. Specialized spin tips enable efficient mixing of magnetic beads with a larger processing volume. With an intuitive user interface and flexible programming, Maelstrom 9600 can boost laboratory productivity by transforming routine operations into a walk-away solution. - High-throughput: 96 samples/run Bedpekzlqfjfx Al Aswu - Efficient whirl stir mixing approach - Speed and precision: 4 independent temperature control modules - Flexibility in samples/run: 6, 12, 18, 24, 32 up to 48 (with single tube) Model: Maelstrom 9600 Volume: 87 x 70 x 57.5 cm Power supply: 220-240 Vac Processing volume: 50ul - 1600ul Spin speed: up to 3000 rpm Magnetic rod: 3000 gauss Display: Touchscreen Good working condition. Please check out our other listings as well.

Condition: good (used), Riello oil burner 482M1,power 2370Kw,220kg/h Bsdpopir Ryofx Al Aswu

Condition: excellent (used), Weishaupt dual fuel burner RGL70,oil+gas,power 10500kw Bwedpjpir Unofx Al Aeu

Condition: excellent (used), Weishaupt RGMS 50 dual fuel burner 5400kw. Gas +heavy oil very rare Bjdpemnqbljfx Al Aewu

Condition: like new (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 1809108209, input frequency: 50 Hz, 2x Kracht lubrication oil unit for sale Bwedpfx Aswzu T Ijl Asu

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice Bwsdpfx Alsxdttpo Asu

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control Bwodpfew Sgnkox Al Aju - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Bwodow Tfzfspfx Al Aeu