Used Omal Insert 900 for sale (6,309)

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t Podpfxjfg E Hpj Aazsrb dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, functionality: fully functional, Year of construction: 2025, *NEW MACHINE* Funnel capacity 900 L Two working shafts with paddles Psdpermknlofx Aazerb Front outlet of the finished product in 200 liter trolley Pneumatic opening of the covers Automatic stop when the lid is opened Loading device for 200 liter trolley Continuous speed adjustment Setting of the working time Connection 400 V / 50 Hz / 3 phases Installed power approx. 11.0 kW Control voltage 24 V DC Machine dimensions in mm. (with mast loading device): Width: 2129.0 Length: 2189.0 Height: 2745.0

Condition: excellent (used), Year of construction: 1999, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. Prjdpfx Aaot N Hmmszjb For more photos and details please send the request.

Condition: used, Year of construction: 2007, Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \'skeleton\' Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Predpfxok Aa Age Aazsb Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, OHRA Cantilever Racking Negotiated price: €6,540.00 net, ex warehouse You are bidding on a racking system with a length of 7.5 m, consisting of: 6 uprights with base, 6 m high + 4 adjustable cantilever arms per upright (120 cm), load capacity 900 kg/arm. Diagonal bracing, stiffeners, and spacers are included. Crossbars, grating, and chipboard are available separately at an additional cost! Frame spacing 150 cm Arm length / cantilever 120 cm Load capacity 900 kg / cantilever Load capacity per upright per side: 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m, or 4 m available. Other configurations available upon request. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse.) Predeby Uunopfx Aazjb Lenox Trading – Top used and new warehouse technology & heavy-duty racking Description text: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ AVAILABLE IMMEDIATELY: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel mezzanine floors immediately available • Weekly 30–50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY AFFORDABLY ONLINE): Whether you need pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATIONS: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a comprehensive, worry-free package: 1. Lump-sum purchase: Purchase of merchandise, fixtures & complete warehouse inventories including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Psdpfjbbr Iisx Aazsrb Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: good (used), functionality: fully functional, total length: 1,010 mm, total width: 820 mm, total height: 2,120 mm, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: AC, Alpeninox 900 Storage Freezer Stainless steel construction For trays 600 x 800 mm Digital temperature display from -5 to -18 °C With 15 support rails 230V connection Dimensions: 820 x 1010 x 2120 mm (W x D x H) Predpfxoy Srvbs Aazjb Used unit

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Podpfx Aaszal Ncjzerb

Condition: used, color: other, first registration: 08/2010, Year of construction: 2010, Empty weight: 350 kg Serial number: 27.59.616.481 We have a stock of >100 axles. Podpfjzwu Riex Aazerb Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 08/2010, Year of construction: 2010, Empty weight: 350 kg Serial number: 27.59.616.481 Predpfozwu Rvex Aazjb We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), Siemens stator for 1FK7042-5AF71 servo motor, serial number YFV343660309002, used, in good condition, 100% functional, scope of delivery as shown in the photos. Pedpfx Aozuu A Heazjrb

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 14,082 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: simplex, construction height: 3,580 mm, drive type: Diesel, Diesel forklift Prodjzvi H Nepfx Aazob Load center: 900 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin, air conditioning,

Year of construction: 2006, condition: used, functionality: fully functional, We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production): BLA - B41, manufactured 2006/2007 (Sweden) BLA - B28, manufactured 2006 (Sweden) Screwdriver 3RL, manufactured 2018 (Lithuania) Robot TECHNICAL SPECIFICATIONS Inserting of Drawer Slides Fitting machine BLA-B41 – pos. 1 Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides. The fitting machine is designed for following sizes of material: Deep: 300–600 mm, servocontrolled adjustment Height: 400–1500 mm, servocontrolled adjustment Thickness: 16 mm Dimensions Machine length: 4100 mm Pass-through height: 900 mm Screwdriver equipment Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws. Podpey T Nfijfx Aazorb A suiting screw is the type 84 FSX Magazine units 2 magazine units designed for left drawer slide 2 magazine units designed for right drawer slide · Each magazine contains approximately 40 drawer slides. · The length of the slides are 450 mm and the width 21.5 mm. Buffer conveyor TPB – pos. 2 Driven roller conveyor Total length: 2150 mm Other specifications are the same as for pos. 3 above. Buffer conveyor TPB – pos. 3 Driven roller conveyor Total length: 2450 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.78 m/sec. at 50 Hz (frequency controlled) Height: 900 mm Returning Conveyor System TPT-US – pos. 4 Sideway section with four belts Speed: 0.5 m/sec. at 50 Hz (frequency controlled) Driven roller conveyor Total length: 8900 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.50 m/sec. at 50 Hz Height: 900 mm Additional specifications Sound pressure level Lower than 70 dB(A) Connection facts electrical With reference to the electrical drawings Connection facts pneumatic 0.63 MPa (6.3 bar), ½”

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_20, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. Pedoy A Nn Nopfx Aazerb That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: P1S5_21, PressOne P1S-5 is a press-in machine from Finland, which is driven by a ball screw with a servo motor. That gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no hassle when changing the oil and no filtration problems. Pure power, accuracy and speed! Technical data: P1S-5 Main press technology: ball screw with AC servo drive Maximum pressing force: 50 kN Repeatability of force setting: ± 1% Maximum opening / approach speed: 120 mm / s Press speed: max 10 mm / s Throat: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 touchscreen 12 " Tool connection: Type PressOne Universal, 4-fold lower swivel base Podpjy A Nq Defx Aazerb * The maximum approach speed requires the "Fast approach speed" option. Control features of the P1S TC12: - Programmable press force - Programmable lift opening - Programmable pressing speed - Programmable speed change point after starting before pressing - 2-stage cycle (start and press) - Possibility to set the press stroke length in millimeters - Save programs for memory control by name or number - Piece counter, cycle stop after the last press - Material table for material / pressing force - Tool library - FTP server connection

Condition: ready for operation (used), KUKA 1FK7105-5AY81-1YY3-Z servo motor, serial number: YFVD50670449004, used, in good condition, 100% functional, scope of delivery as shown in the photos. Predpfx Aaszyfh Dszsb

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Prodpfx Ajzypawsazeb Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, cutting width (max.): 900 mm, total height: 2,600 mm, total length: 1,700 mm, total width: 1,800 mm, overall weight: 800 kg, saw band length: 4,600 mm, saw band width: 25 mm, table width: 1,800 mm, throat depth: 900 mm, working height: 800 mm, Band saw for cutting wood and other wood-based materials, and more. Cast iron construction. Working wheels 900 mm. Cutting width 900 mm, cutting height 800 mm. Cast iron construction, weight 800 kg. Condition after complete overhaul. Equipped with saw blade. Covers included. Prjdpfxexl Svxs Aazsb

Year of construction: 2025, condition: new, Industrial mixing machine for blending dry, moist or pasty products, specifically designed for products with large net weight. The horizontal single shaft with the double ribbon mixers is blending the materials into high uniformity in a few minutes. – Specifications: agitator type: single-shaft double ribbon agitator; capacity: max. 9000 liters; max. speed of the machine in neutral: 20 rpm; power: 90kW; machine dimensions: L6500xW2100xH2800mm; weight: 9800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Prjdsv Nly Ajpfx Aazsb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, maximum load weight: 5,000 kg, overall weight: 6,900 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 4,580 mm, loading space width: 2,030 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 2,870 mm, * Blomenröhr 552/6900 low-loader * 2 axles Podpfx Ajytzi Seazorb * 5-ton payload * Height-adjustable tandem * Original integrated ramps

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Kohler KDI2504TCRCAC-SV, General information Field of application: Construction Weights Empty weight: 1.500 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 254 x 114 x 165 cm CE mark: yes Other information Fuel consumption: 8.1 L/Hour at 75% Load Generator: Mecc Alte ECP32-2M/4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 250 l Production country: ES Additional information Please contact Team DPX for more information Pedpsynrkcjfx Aazjrb = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00602, load capacity: 280 kg, arm reach: 3,103 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-900iB/280L manufactured in 2017.02. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Psdpfx Aoz Af Tloazjrb Model: M-900iB/280L Model Number: A05B-1335-B203 Year of Manufacture Robot: 2017.02 Warranty term (months): 12   Payload (kg): 280 Reach (mm): 3103 Repeatability (mm): ± 0.1 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 1600   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2017.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Year of construction: 2024, condition: new, Trolley for carriage and storage of profiles in vertical position COMALL CARR 300 Q, new Technical specifications: - 10 compartments with working size 128 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - 4 wheels Ø 125 mm, 2 of them with locking device - Arms adjustable in 5 different positions Psdef Nk H Hopfx Aazsrb - Rubber-coated supporting table - Loading: 650 Kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 959, We offer this used LCM PRIMA PRIMA INSERTER MAXI 450 machine, year of manufacture 2023. Manufacturer: LCM Divisione Macchine Type: PRIMA Serial number: 959 Year of manufacture: 2023 Condition: used – like new Availability: immediately The machine is in virtually perfect condition – it has only been used for the production of a few prototypes, resulting in minimal wear. All components operate flawlessly, with no signs of use. If you have any questions or need additional information, please contact us by message or phone. Prsdpfey Dax Iox Aazeb

Condition: used, 1 off Fronius weld overlay cladding cell Full working order, consisting of: Podpfx Aezquk Njazorb FPA 9000 Digital System Controller Complete with PA9000-RC Remote Pendant Bore-to-bore software 1 off TT 5000 DC 500 Amp TIG power source 1 off TT 2200 DC 220 Amp HW power source 1 off 2,000mm by 1,000mm Cross Slides 1 off KD1500 TIG wire feeder 1 off Standard Single Wire Swivel Head Torch Complete with all ancillary connection cable and hosepacks 1 off 10t turntable 1 off Heavy Duty 4x3 Column and Boom Can be supplied and integrated with optional 3t hollow headstock for horizontal cladding TPS can offer additional installation separately worldwide if required.