Used Panini Press for sale (12,331)

Condition: used, Year of construction: 1988, Pressure 315 t distance between columns 1350 mm Cjdpoy Rutgefx Ahvjgw stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1200 x 1300 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 680 mm/s working speed 180 mm/s oil volume 2000 l power requirement 150,0 kW weight 35,0 t Dimensions (WxDxH) 3,3 x 3,3 x 5,5 m height over floor 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning with depth stop (motorized adjustment), hydraulic ram interlocking as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm Cgedpfx Aoyx Ik Uehvew side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1983, pressure 315 t distance between columns 1620 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1100 mm pressure of drawing cushion in ram 20 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 300 x 300 mm side window 600 x 1100 mm table height over floor 750 mm ram surface 1600 x 1100 mm oil volume 1500 l Codpfx Ahjyx Ikhevjgw power requirement 110,0 kW weight 35,0 t dimensions (WxDxH) 4,65 x 2,61 x 5,5 m height over floor 5,05 m height beneath floor 0,45 m with oil-hydraulic drive, controllable dependent on pressure/time and way, NO drawing cushion in table, hydraulic drawing cushion in ram, hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Cgjdpfsxwdrvjx Ahvsw Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t Cgodpfevzxqrox Ahvsw stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t SPECIAL DEAL as is where is, stored in dismantled condition WITHOUT putting into operation / WITHOUT additional work free loaded to truck Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side Codsvuukhepfx Ahvjgw · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Cgsdpovuk I Njfx Ahvow Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Cgedsvuuhmepfx Ahvsw Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: used, Year of construction: 1987, pressure 300 t distance between columns 2500 mm stroke 350 mm distance table/ram, max. stroke up, adjustment up 1280 mm table surface area 2500 x 1500 mm table height over floor 850 mm Csdpfx Aovuk Ivshvogw side window 900 mm ram surface 2500 x 1500 mm speed down 300 mm/s speed up 240 - 450 mm/s working speed 23 - 44 mm/s oil volume 3000 l power requirement 132,0 kW weight 54,0 t Dimensions (WxDxH) 3,25 x 3,2 x 4,8 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm Cedevuufxspfx Ahvogw pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2026 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m Cgodpfjvuk Iijx Ahvew with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary Cedpjvuudzefx Ahvsgw

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m Cgsdevut Hnepfx Ahvsw with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Machine weight: 19500 kg Machine height: 3250 mm Machine length: 5350 mm Machine depth: 2450 mm Control system: ER 70 Travel range, X-axis: 750 mm Press force: 300 tons Working length: 4100 mm Column spacing: 3550 mm Upper support: BBombering: CNC Cedpfx Ahszhn Nasvogw

Condition: new, Year of construction: 2026, operating hours: 8 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Cedpfxoxfwdj Ahvjgw Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2023, operating hours: 2,216 h, total length: 5,750 mm, total width: 2,110 mm, total height: 3,640 mm, Weight: 27.760 kg Price: On request Cgodpjzcnpdofx Ahvjw - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 7376230761 - Operating hours: 2216 - Drive system: CNC - Control system brand: Durma - Control system type: DT-15 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 400 - Max. working width [mm]: 4050 - Column gap [mm]: 3400 - Throat depth [mm]: 630 - Max. stroke [mm]: 365 - Crowning system: CNC-controlled - Tools included: Yes - Transport dimensions: 5750mm x 2110mm x 3640mm (l x w x h) - Transport weight [kg]: 27760kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Codpfx Ahsybdtcovjgw Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 0 - Drive system: CNC - Press force [ton]: 240 - Max. working width [mm]: 4100 Cgedpfx Ahszcmrkjvew - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Control type: Delem DA-69T Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Cedpszb Eg Refx Ahvegw Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between uprights: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Stroke: 350 mm Overhang: 420 mm Laser monitoring: FIESSLER Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approximately 450 mm into the floor. Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: very good condition only 9,200 operating hours in the meantime, we have stored the machine and removed the table Cgedpfoy D Sb Ujx Ahvjw The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Cgjdpfx Ahozbvvvjvjw Machine weight: 3700 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 100 t, stroke length: 300 mm, operating speed: 10 mm/s, Equipment: CE marking, safety light barrier, Bending capacity: 100 Ton Bending length: 3100 mm Backgauge: 550 mm Cjdpfx Aozbvulohvogw Stroke length: 300 mm Bending speed: 10 mm/sec Supplied with: - 2 support arms - Integrated safetyscreen - 6 axis controlled Y1, Y2, X, R, Z1, Z2 - Cabinet with many tools - User manuals Country of origin: Netherlands Motor power: 11 kW Machine (L×W×H): 400 x 230 x 290 cm Machine weight: 6350 kg

Condition: new, pressing force: 100 t, Equipment: CE marking, Offer: "The All-rounder" For economical bending with premium features: 4-axis back gauge (expandable to 5 axes), BendGuard safety system, ACB Laser angle measurement system, bending aid, and efficient on-demand hydraulic drive. The images shown are examples and may not reflect the standard scope of the offer. For offer details and further information, please contact us. About the machine: Do you need a reliable bending machine that delivers premium quality even with a limited budget? Then the TruBend 3000 is the ideal solution for you. The focus here is on what really matters: economy, stable processes, the highest precision, and proven TRUMPF safety standards. With its robust system design, intelligent premium features, and consistently stable operation, the TruBend Series 3000 offers optimal conditions for productive manufacturing. It is ideal for complex bent parts in small and medium batch sizes – even under economic pressure. Precise bending – The ACB Laser angle measurement system automatically ensures precise angles with ±0.3° accuracy. Productive work – The on-demand hydraulic system and intelligent bending aid increase your productivity and noticeably reduce the workload on your team. Flexible programming – With TRUMPF Software TecZone Bend, you can program offline, and the machine continues to produce in parallel. TRUMPF Service – Bending tools, training, and technical support – we support you worldwide. With us, you get more than just a machine: a complete ecosystem that optimally supports your bending production. Further technical data can be found in the data sheet or on our website. If you have any questions, please contact us. Codpszhu Amsfx Ahvjgw P.S.: With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we also support you in overcoming financial challenges.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm Cedow Nafkopfx Ahvsgw - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and carpenter’s boards • Low space requirement and front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment – practical and functional • Vertically movable supports with frame pressing mechanism Technical data: Working surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of the hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Cgjdpfx Aekwhb Hjhvow Overall dimensions: approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice