Used Passavant Used Filter Press Frame for sale (61,113)

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ijdpfxsfcw Ape An Netk Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection Iodpek S Htxofx An Njtk - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 470 x 470 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 84 liters, filter surface 7m², dimensions 2300 x 800 x 1200 mm, weight 850 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Itjdpfxofbbpko An Nek

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 1500 x 1500 mm, 75 plates, open spout, 30 mm cake thickness, pressure max. 3500 liters, filter surface 270 m², dimensions 8500 x 2200 x 2400 mm, weight 28,000 kg, plate transport, motor hydraulics, drip tray, filtrate, with or without filter cloths Iodpfjfbbp Usx An Notk

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 250 x 250 mm or 300 x 300 mm, 15 plates, open spout, 20 mm cake thickness, pressure max. 10 bar, capacity 10 liters, filter surface 1.5 m², dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feed pump and piping, Rental of a small press for experiments is also possible. Iodpfxsfbbpwe An Nstk

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 800 x 800 mm, 20 - 100 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 1500 liters, filter surface 20 - 100 m², dimensions 2500 - 9000 x 900 x 1300 mm, weight 3500 - 10000 kg, motor hydraulics, with or without plate transport, with or without filter cloths Iedsfbbp Sopfx An Nstk

Condition: refurbished (used), Chamber filter press with feed pump, cpl. new built in swap body or sea container, preferably 800 filter press with piston diaphragm pump, special requests can be considered Iedpfsfbbqrjx An Nstk

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 500 x 500 mm, 20-45 plates, open spout, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 70-190 liters, dimensions 2000 - 3000 x 1000 x 1400 mm, weight approx. 1300 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Isdpfjfbbpmox An Notk

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 630 x 630 mm, 20 - 60 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 500 liters, filter area 13 - 40 m², dimensions 2000 - 4500 x 900 x 1300 mm, weight 1500 - 2500 kg, optionally with manual or motor hydraulics, with or without filter cloths Itjdpfofbbp Dex An Njk

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 400 x 400 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter surface 5m², dimensions 2500 x 700 x 1500 mm, weight 1000 kg, engine hydraulics, drip tray, filtrate, with or without filter cloths, piston pump incl. Piping with built Iodpfsfbbpqex An Netk

Condition: refurbished (used), Year of construction: 1990, div. Chamber filter presses from Rittershaus & Blecher, Netzsch and Passavant to be handed over, plate format 1200 x 1200 and 1500 x 1500 mm, from 40 - 145 PP plates, content from 1000 - 4500 liters, length approx. 6 - 13.6 m, all presses have to be refurbished are then sold with a 1 year guarantee, a piston Membrane pump for loading can also be offered, location is 58762 Altena Ijdpfx Aogpxg Sen Njtk

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm 2 heating rails Ijdpfxed H Irfe An Netk

Condition: good (used), For fully automatic assembly of frame components. Frame outer dimensions: min. 120 x 120 mm Isdpodhdg Iofx An Njtk max. 700 x 2,500 mm

Condition: used, Year of construction: 1986, - 2 pneumatic cylinders along the length - 2 pneumatic cylinders along the width Itodpfsiim Rnox An Nsk - 2 pneumatic workpiece clamping devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Machine dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Condition: new, Technical Data • Application: for frame assembly • Minimum frame outer dimension (mm): 120 x 120 • Maximum frame outer dimension (mm): 700 x 2200 • Machine length (mm): 2750 • Machine width (mm): 1250 • Machine height (mm): 900 • Machine available in special sizes Machine Features • Precise alignment of frame strips eliminates any displacement of the mitered surfaces relative to each other. • Manual alignment of frame strips is no longer required. • Frames can be produced economically through automation. • Frame dimensions are not limited by the machine design. Itodpfx Aefiqllon Njk • Various popular methods for joining frame miters are possible. • The compact design results in a small footprint for the machine. • Simultaneous gluing of the center layer is possible. • Complete fronts can be glued in a single process.

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Itjdpfx Ash U Dtusn Nek Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine Itedpfxeh Uhqys An Njk - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Ijdpfx Aned Swtae Notk Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Iedpfxsdzqddj An Notk Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Technical specifications: Max. dimensions of the glued component: 2900 x 1900 mm 3 vertical clamps 2 horizontal clamps Hydraulic clamps Power supply: 400 V Motor power: 1.5 kW Motor speed: 1410 rpm Overall dimensions: Length: 3500 mm Iodpfx Aszikz Uen Njtk Width: 1000 mm Height: 2600 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: CE marking, For sale: a window and door press from the Italian company Casolin, model Junior. Baling press. Iodpfx Ajzhil Njn Notk Year of manufacture: 2008. Increased working area: 3000 mm x 2500 mm (exact dimensions in the photos – showing the press fully extended). The press is in good working order. We have the instruction manual in English. There is a minor issue with the joystick – it is functional and operational, but its base is likely damaged, and it has partially sunk inside. (photo attached). Export price – domestic price plus VAT. Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: used, Technical specifications: Max. dimensions of the glued component: 2500x1200 mm 2 vertical clamps 2 side clamps Maximum clamping force: 2700 kg Pneumatic clamps Overall dimensions: Length: 2600 mm Iedpfx Aoziacnon Nstk Width: 1600 mm Height: 2100 mm

Condition: used, Technical specifications: Maximum dimensions of the glued component: 1800x3000 mm 3 vertical clamping units - top 2 horizontal clamping units - side Hydraulic clamping units Power supply: 400 V Ijdpfx Aszh U Shen Njtk Motor power: 2.5 kW Overall dimensions: Length: 3750 mm Width: 1200 mm Height: 2500 mm

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features Iedpfxsxrnvbs An Notk • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Isdpfx Aew Tukisn Notk Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton