Used Pedi Gr: 2S for sale (3,564)

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Dough divider and shaping machine TOP Fortuna roll former, size 3 Hedpfx Aew Hn H Ejc Ijfl Robust technology Dough head newly revised Stainless steel knives, new Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Optional: Stainless steel platform New shaping plate Service package Maintenance contract Training & commissioning Delivery service Test our exclusive service for you!

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 159 kg, empty load weight: 1,112 kg, construction height: 1,980 mm, fuel type: electric, total length: 1,350 mm, drive type: Elektro, construction width: 750 mm, working height: 8,020 mm, Vertical lift platform Condition: Like new Hfjdezrcahopfx Ac Ijl Technical condition: New Front tire type: Solid rubber Front tire size: Non-marking solid rubber tire, 25x8x20 cm Rear tire type: Solid rubber Rear tire size: Non-marking solid rubber tire, 25x8x20 cm Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2016

Condition: like new (used), Fortuna divider for maximum 100gram pieces In good working condition for more information please sent an request Hodpfxeumpkie Ac Iefl

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Hjdpfx Acjzfx A Es Isfl Errors and prior sale excepted.

Condition: reconditioned (used), functionality: fully functional, total length: 580 mm, total width: 580 mm, total height: 1,350 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Dough divider and forming machine Fortuna bread roll press, size 3 Hedpfew Hn H Sox Ac Iefl Dough dividing head, newly revised Stainless steel knives, new Top model Robust technology Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Used machine, overhauled + SAB inspected with warranty Optional: Stainless steel platform New forming plate Service package Maintenance contract Instruction and commissioning Delivery service Try our exclusive service, designed just for you!

Condition: used, mileage: 160,847 km, power: 162 kW (220.26 HP), first registration: 02/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, crane, soot filter, Renault D14 220 3Skipper + Effer 65 2S crane Suspension: leaf-leaf Wheelbase: 3.75 m Effer crane Type: 65 2S 3x hydraulic extension Hedpfsyyrq Isx Ac Ijfl 2x stabiliser points We are also happy to assist you with financing/leasing options through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training. Hfodpfx Acszcaxke Isl

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) • Machining Height: 2,100 mm / 3,500 mm Hfjdpfx Acohh Dnxe Iol • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.

Condition: used, axle configuration: 3 axles, first registration: 07/2020, loading space length: 5,750 mm, loading space width: 2,150 mm, loading space height: 900 mm, wheelbase: 1,000 mm, gearing type: other, driver cabin: other, brakes: other, * German trailer * 1st owner * Condition as shown in photos * Special trailer with tridem axle and split loading platform * Front body with mesh extension, electrically tiltable on both sides * Behind that: flatbed/platform/low-loader with access ramps * Large loading area with phenolic plywood floor and DIN lashing rings * Ideal for landscaping, construction industry, and much more * Loading platform dimensions: 3.75 m x 2.15 m x 0.35 m, aluminum sideboards * Payload: 2,230 kg * Tipper area: 2.00 m x 2.15 m x 0.90 m * Electric tipping mechanism with cable remote control * Road approval for 100 km/h * Tip floor with steel base * Tridem axles * Gross vehicle weight: 3,500 kg * Curb weight: 1,270 kg * Payload: 2,230 kg If a new TÜV inspection (MOT) is desired, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and expressly recommend viewing and inspecting the goods to avoid misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Hfedpfsxnqv Aex Ac Isl Subject to change, prior sale, and errors.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Hfsdpev Dkvrofx Ac Iel Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device Hfedpjit Ev Tofx Ac Isl simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Technical details: diameter: 200 mm Hfedpjvb Amqjfx Ac Iol Weight: 4 kg

Condition: used, Technical details: diameter: 300 mm tool adaptor: 40 Weight: 5 kg Taper ISO 40 * Hodpfx Acovb Amkj Iofl

Condition: new, Virutex hand planer. Especially for left and right hand use Long version for 100 % straight work. Hfodpfx Acjum Skxe Iol 990 W, 12,500 rpm. Incl. side guide 2 pieces in original packaging

Condition: good (used), BILZ Size 3 Radius Lathe Hodpfx Ajv Sag Noc Ijfl Turning Diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Hfodpfx Ajy Snm Njc Iel Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Hsdpfx Acotzctms Isfl Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Hfedpfx Acjzh Nf Aj Iel Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: new, empty load weight: 570 kg, maximum load weight: 2,130 kg, overall weight: 2,700 kg, loading space length: 2,920 mm, loading space width: 1,520 mm, loading space height: 350 mm, tire size: 195/50R13C, Car trailer for transporting construction machinery from trailer manufacturer TEMARED model Builder3-3015/2S 2700kg. The standard equipment of the construction machinery trailer is a stable frame, drive-over flap, bucket support support wheel and a V-drawbar. Hfodpeq Ecvdefx Ac Iel This machine trailer is also available in other dimensions. We also offer accessories for excavator trailers such as tool box, lashing straps, drawbar protection cover and anti-theft device at a reasonable price.

Condition: new, empty load weight: 700 kg, maximum load weight: 2,800 kg, overall weight: 3,500 kg, loading space length: 3,950 mm, loading space width: 1,820 mm, loading space height: 250 mm, Car trailer for transporting construction machinery from the trailer manufacturer TEMARED model Builder3-4018/2S 3500kg. Hodpfxjv A T Ihj Ac Ijfl Standard equipment of the machine trailer is a stable frame, drive-over flap, bucket rest, support wheel and a V-drawbar.

Condition: used, mileage: 495,000 km, power: 353 kW (479.95 HP), first registration: 06/2008, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Climate control - Moser (likely a brand name) Hodpfx Acjzhhvaj Isfl - 2-page brochure - Trailer coupling - Suspension: Leaf spring suspension

Condition: new, Year of construction: 2025, Genie GR20 Runabout vertical mast work platform, new, used, demonstration machines available Hsdpforh D R Asx Ac Isfl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 541-07, overall weight: 745 kg, CMA robot for painting windows complete with scaner. Hfsdpfsupyzqjx Ac Ijl Dismounted, ready for transport.

Condition: ready for operation (used), Outer Diameter: 300 mm boring: 90 mm height: 110 mm Hedpfxod H I Sys Ac Isfl weight: approx. 59 kg

Condition: good (used), Metabo belt sander UR 33/2S, 400 Volt, 2800 rpm Hsdpox Rt D Refx Ac Iofl