Used Pgcnc Drukarka 3D 1325 for sale (1,650)

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) Bledpjy Hmhhjfx Amieh - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Bljdpfxoyw Nxwo Amioh Component clearance: top 40 mm, bottom 40 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, ZEISS Comet®LƎD 8M 3D scanner, software + computer Bledpfx Amjy Sg N Aeijh

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: Bledpfx Aoyxy Sdjmijh 3D scanner Calibration panel Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Bedpfjx Swcaox Amielh Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 16 Total number of tool changer positions: 22

Year of construction: 2022, operating hours: 998 h, condition: used, functionality: fully functional, machine/vehicle number: 031022210023, We offer setup for SLS 3D printing consisting of Sinterit LISA X SLS 3D printing machine, Sinterit Powder Handling Station, Sinterit Sandblaster SLS and cadMIX powder mixer. Details reg. Sinterit LISA X 3D printer : Laser type: IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs Max. size of print diagonally: 398 [mm] (15.7 [in]) Max print volume: TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in]) PA / PP: 130x180x330 [mm] (5.1×6.7×13.3 [in]) Layer height (min – max): 0.075 – 0.175 [mm] (0.003 – 0.006 [in]) Build Speed: up to 18.4 [mm/h] (0.72 [in/h]) Serial number: 031022210023 Manufacturing date: 05/2022 Country of origin: EU, Poland IEC protection class: Class 1 IP code: IP30 Machine type: Selective Laser Sintering 3D Printer Dimensions (W × D × H): 650 × 610 × 1200 mm (25.6 × 24.0 × 47.2 in) Total weight: 145 kg (319.0 lbs) Supply voltage range: 190–240 V AC Supply frequency range: 50–60 Hz Maximum power consumption: 1650 W AC current: 8 A AC voltage for current rating: 230 V AC Number of phases: 1 Short-circuit current rating: 6 kA Total printing time : 998 hrs Bsdpfx Aey Snn Hemiolh For more details and technical specifications please see attached .pdf documents. We are selling complete setup together not separately. Complete setup bought in Slovakia. Examples from printer are available. Box for transport is available. Printer has open system, it is possible to modify the parameters. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2007, This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information. Bsdpfxjx D Rymj Amielh Additional equipment • Measuring Probe: Renishaw TP20 • Probe Change: MCR20 (6 pieces) • Software: “ThomControl” (with new software version retrofitted in 2018) Machine Benefits Technical Machine Benefits • Measuring range: 1200x800x700 • Accuracy: u1= 2. 5 + l/350, u3= 3 + l/300

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area Bljdpfx Amjwc Sxdoijh 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), mileage: 100 km, first registration: 07/2007, fuel type: diesel, fuel: diesel, Year of construction: 2007, Technical condition: good Blodpeyntpyjfx Amish Visual condition: very good Contact Andre, Henri or Andre for further information.

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 1,200 mm, total height: 1,550 mm, total width: 1,138 mm, overall weight: 350 kg, input voltage: 220 V, nozzle diameter: 3 mm, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, power: 5 kW (6.80 HP), space requirement length: 1,200 mm, space requirement height: 1,550 mm, space requirement width: 1,138 mm, Equipment: compressor, INONE3D FGF800 (WXF-FGF800) – Industrial Fully Enclosed FGF 3D Printer The INONE3D FGF800 is a next-generation industrial 3D printer for 2025, developed for Fused Granulate Fabrication (FGF) and designed to provide cost-effective, large-format printing directly from plastic granules. This solution is ideal for manufacturing large prototypes, technical components, molds, and functional parts where reduced material costs and high productivity are key. The machine features a fully enclosed housing, which improves process reliability, increases operator safety, and ensures a more stable printing environment. With a generous 800 × 800 × 800 mm build volume, support for 1–5 mm plastic granules, and interchangeable nozzles (0.6–3.0 mm), the FGF800 is suitable for both high-speed, large-volume production as well as applications requiring higher detail. Technical Specifications: - Printing Technology: Fused Granulate Fabrication (FGF) - Model: WXF-FGF800 - Build Volume: 800 × 800 × 800 mm - Nozzle Diameter: 0.6–3.0 mm - Granule Size: 1–5 mm - Maximum Power Consumption: 5 kW - Power Supply: 220 V - Net Weight: 350 kg Bljdpfx Aeyv Edajmijh - Machine Dimensions: 1200 × 1138 × 1550 mm - Year of Manufacture: 2025 - Warranty: 12 months - Design: Fully enclosed industrial 3D printer - Availability: 2 units in stock

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: Bjdpfx Aoyvhwiemiolh ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor Bledpfx Ametz Dg Ueieh - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm Bljdpfx Asu Afu Rjmioh 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. Bjdpfeu S N R Ejx Amielh - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld Blsdpfxeu Abn Tj Amioh - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Bjdsyrun Ejpfx Amijlh Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone. Blodpju Ebpcofx Amieh

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Blsdpfx Amslgwb Ssioh

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Bjdpfx Amswnpbgjiolh Written orders possible by email or fax

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Weight 1500 kg Bodpfx Amsv A Hadsiolh Total power requirement 14 kw

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Bljdpfx Amsy Szv Rjieh Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. B2B sale only. Bledpfxsyt Rmge Amijh

Condition: excellent (used), We offer you: 3D Manufacturing Measurement System Manufacturer: Keyence Model: XM-5000 Technical Data: - Maximum measuring range: 2000 × 1200 × 1000 mm - Measuring accuracy: ±(7 + 9L/1000) µm - Repeatability: ±3 µm Blodpfx Amow H Rb Seioh Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to prior sale, changes, and errors in technical data and specifications!

Condition: new, Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Bledpfx Aeq Tn I Nsmioh Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). Blsdpexw Uyqefx Amieh The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.