Used Plastic Hose for sale (8,503)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Iodpfxszcv D Ne Acistl Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: used, functionality: fully functional, machine/vehicle number: 31019, mileage: 69,900 km, power: 170 kW (231.14 HP), first registration: 05/2021, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, immobilizer system, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Lrsbn Ed Iezktyvs E Ior Further comparable vehicles available upon request. Itsdpozwfp Nsfx Acisl Right-hand drive, 4-cylinder engine OM 934, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t with air suspension and differential lock, lane keeping assist, Active Brake Assist, hill start assist, underrun protection, reversing warning sound, daytime running lights, rain sensor, light sensor, plastic toolbox, fuel tank (125 liters), AdBlue tank (8 liters), fuel tank with locking mechanism. Cab with 2 seats, driver comfort seat, passenger fixed seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, OBU preparation, cruise control, digital tachograph, sun visor, reversing camera. Hydrostatic drive, turbine with infinitely variable speed control, tank made entirely of stainless steel, additional manual pump for lifting the boiler, weight indicator, operating hour counter, sweeping hour counter, and water level indicator (residual quantity 300 l). Automatic shut-off of the water supply when lifting the sweeping unit and when engaging reverse gear, acoustic signal in the cab when the boiler is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, sweeping unit on the right/left, capable of sweeping on both sides, dual sweeping system (can sweep on both sides simultaneously), sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, disc brush with steel bristles Ø 700 mm, disc brush angle adjustable (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles L = 1500 mm Ø 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles on each disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, water system for cleaning the upper suction shaft with external water connection, leaf grid in stainless steel, area approx. 2 m², lifting and lowering pneumatically with vibration mechanism, turbine wheel made of Hardox 700, 8 mm thick, housing arch made of Hardox 500, 5 mm thick, water nozzles for internal cleaning of the turbine, water tank 2000 liters made of stainless steel AISI 316 integrated into the superstructure, filling via hose with anti-return valve, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for broom and shovel, cable remote control.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Iedpfxjzu T Sms Aciotl Sold on behalf of a customer! Technical data without guarantee!

Condition: good (used), Fromm plastic band strapping line with press , 18 mm band fully automatic Iedpfxszc Ic Rj Acijtl

Condition: used, operating hours: 130 h, functionality: fully functional, power: 8.09 kW (11.00 HP), first registration: 12/2011, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2150 Nilfisk Egholm Park Ranger 2150 - Used Unit Year of Manufacture Base Unit: 2011 Cab: 2015 Operating Hours: 129 Technical Data - Base Unit Itedpfxozf Ezbj Acijl Length mm 2225 Width mm 1015 Height with / without cab mm 1935 / 1210 Weight with / without cab 1) kg 670 / 560 Payload kg 630 / 740 Permissible Total Weight kg 1300 Engine: Perkins Diesel 403J-11 HP / kW 26 / 19 Four-wheel drive: Standard Drive System: Hydrostatic drive. Completely hydraulic operated machine carrier: requires minimal maintenance. Performance: Turning radius - curb to curb mm 3000 Turning radius - inside mm 1100 Working speed, max. km/h 16 Articulated Steering Quick-change system for all attachments Trailer hitch Liquid wax coating 12-Volt socket: For mobile phone charger Attachments Front sweeper (summer) with 3 side brushes from 2015 Height adjustment: The front wheel on the brush unit adjusts the optimum sweeping height while minimizing brush wear. Weight: 91 Kg Brush rotation speed: Infinitely adjustable. Dimensions Length mm 2900 Width mm 1200 Height with mounted hand suction hose mm 2200 Dimensions when parked Length mm 1350 Width mm 1010 Height mm 1920 Working width - 2 brushes: 1220 mm Working width to the 3rd brush: 1660 mm Hand suction hose: 6 meters Sweeper hopper from 2015 Net capacity: 438 liters Gross capacity of the sweeper hopper: 458 liters Sweeper hopper payload, max: 300 Kg Tipping height: 1300 mm Weight: 131 Kg Capacity of the fresh water tank: 100 liters Front sweeper (winter) from 2011 Dimensions Length: 3020 mm Width: 1220 mm Height with cab: 1935 mm Dimensions when parked Length: 900 mm Width: 1220 mm Height: 650 mm Weight: 101 Kg Performance Clearing width, straight position: 1220 mm Clearing width - 25°: 1140 mm Ground clearance under the brush: 420 mm Brush diameter: 550 mm Working speed: 1-10 km/h Theoretical sweeping performance: 12200 m2/h Clears snow depths of up to: 150 mm Brush rotation speed rpm 255 Swivel angle 25° Salt and grit spreader from 2011 Durable material: All parts in contact with salt and grit are made of corrosion-resistant plastic or stainless steel. Extra spreading material: Additional bags of salt and grit can be stored on the grid of the spreader hopper until the total weight is reached. This allows you to refill on the go. Support: This is used for quick and tool-free installation and removal, as well as for storage when not in use. Installation and removal are tool-free and easy on the back. Cover: Protects the spreading material from moisture. Dimensions Length: 2510 mm Width: 1015 mm Dimensions when parked Length with support: 1175 mm Width: 800 mm Height with support: 1350 mm Weights Weight with cab: 860 Kg Payload with cab: 440 Kg Weight (salt and grit spreader): 97 Kg Spreader Volume: 210 liters Spreader payload, max: 350 Kg Loading height: 1250 mm Performance Spreading width: 1000-5000 mm Operating speed: 1-16 km/h Subject to changes, printing errors, and prior sale. All information is provided without warranty. Sale is made excluding any guarantee or warranty.

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Itjdpfszd Alzex Aciel Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Itedpfozd Eynex Acijl Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Itedpfxohh Spre Acijl Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: refurbished (used), 150 m³ / 150,000 l fire water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ Length: approx. 22,500 mm Diameter: approx. 3,000 mm Weight: approx. 32,000 kg Material: Steel grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked on and driven over (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blank cover, seal, and screws. Available new or used, ready for immediate delivery! The container has been emptied, cleaned, fully overhauled, and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in design B without a level indicator. - Vent flange stub with a cap, total length approx. 1,300 mm, suitable for 800 mm of soil cover and 500 mm above ground. - Externally coated with bitumen for protection. - Upon request, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion). Isdpshh St Iefx Acijtl - It is also possible to line the container with a plastic inner liner. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. An inspection is possible at any time after prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de. We can also accept and purchase tanks/containers of all types; please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Year of construction: 2014, condition: good (used), Riggs 1000 Depositor Stainless depositor, 50L hopper, filling 5ml to 55ml, with nozzle on hose, mobile Itodpfxezvlkks Acijl

Year of construction: 2026, condition: new, The Vacuum Auto Loader is designed for the automatic conveying of plastic granules and powdered materials to drying hoppers, extruders, injection molding machines, and other processing equipment. Technical Specifications Model 300G • Vacuum pressure: 10,000 Pa Itsdpfxszvzf Rj Acijl • Air flow: 1 m³/min • Motor power: 1.1 kW • Motor speed: 2800 rpm • Power supply: 380 V, 3-phase, 50 Hz • Conveying capacity: 100 kg/h • Material hose diameter: 50 mm • Suction hose diameter: 60 mm • Conveying method: Vacuum suction Model 800G • Vacuum pressure: 10,000 Pa • Air flow: 3 m³/min • Motor power: 3.0 kW • Motor speed: 2800 rpm • Power supply: 380 V, 3-phase, 50 Hz • Conveying capacity: 300 kg/h • Material hose diameter: 50 mm • Suction hose diameter: 60 mm • Conveying method: Vacuum suction

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Isdpfx Aezxz R Sscistl Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Iodpfxsyr Aiws Acistl Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) Ijdpfjzzavfsx Acistl ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch Itodpfx Acexabc Reisl - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Extra storage on the hydraulic motor, Itodjulnbqepfx Aciol Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter Itodpsy Erxvjfx Acisl - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Air suspension + 100 km/h Equipment: - Electrically lowerable - Approach angle 4° - Automatic regulation Net price: €10,752.10 / Gross price: €12,795.00 Itjdpfx Aszy Dtrocijl Article number: TMA235371500.01 Technical data: • Brand: Tohaco • Model: MA235/3715 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 370 x 150 x 10 cm • External dimensions (L x W x H): 506 x 208 x 95 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Tare weight: 674 kg • Payload: 2,826 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: VB air suspension + 100 km/h • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Hot-dip galvanized chassis • Very stable steel frame, welded • Rear end sloped • Very stable V-drawbar • Plastic mudguards • Wheel suspension, independently air-sprung • Incl. 100 km/h approval • Loading platform can be lowered to the road surface or the ground by means of air suspension • Approach angle approx. 4°. • Air suspension fully electronic • 4 air springs • 4 adjustable shock absorbers • Emergency valves for external filling of the air suspension • Tires 195/50R13C • Polyamide air hoses • Connections of the air suspension system made of stainless steel • Function only with a fully loaded 13-pole socket • Mounting of the spring system completely under the loading platform • 12V AGM vehicle battery 75 Ah • 2 sensors for height control • Electronic height control and adjustment of the driving level of the loading platform • Electronic remote control in the drawbar • Compressor 12V 18-Bar - Made in Germany • Air tank 10 liters • Charging socket for external battery charger • ASCU control system • 18mm multiplex floor panel, made of birch wood, with anti-slip coating • Lashing rails, left, right and front • Foldable license plate holder with LED lighting • Support wheel, automatic • Oversized safety lighting • Integrated rear fog light • Reversing light • 13-pole plug _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired additions! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, saw blade diameter 355 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW Iodpfjxabypsx Aciotl weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 Isdpevccc Isfx Aciotl The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 09/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Iodjzzk Sqepfx Acijtl Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 8 mm Front right - 8 mm Middle left - 10 mm Middle right - 10 mm Rear left - 10 mm Rear right - 11 mm

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 compartments, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Payload 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 compartments, 6 dome lids on top Air suspension with raising and lowering function Loosening device Pressure gauges Outlets / filling points on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side in front of the frame + plastic storage box on the passenger side in front 2 x 12-ton 2-speed gear winch Air suspension with start-stop function (red+black) 1st axle: lift axle with switch BPW drum brakes ALCOA light alloy rims, predominantly Tires 385/65R22.5, 1st approx. 80/90%, 2nd approx. 50/80%, 3rd approx. 80/90% 3rd axle: steering axle Rear view camera Folding access platform with walkway 4 x wheel chocks Hose compartment / storage compartment open on the driver's side Iodpfx Aezyzffjcietl Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Itedpfxezca Uxs Acisl

Condition: excellent (used), BIO-CIRCLE Iedpfszgclmjx Acijtl Type: RWR 80L Auto KST Description: RWR 80 L KST Fully automatic PLC parts cleaning system The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without dismantling. The unit is space-saving, quiet and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz, 16A CEE 5p 6h plug Drain: 1 1/4" outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Whole components (without dismantling) Quality seals: Stainless steel, service package available Maximum filling capacity: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heater: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 kg Application area: The RWR 80 L KST fully automatic PLC has been developed for the field of plastic injection molding and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST fully automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system begins to heat up. During the heating-up period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically, after the instructions displayed on the screen have been confirmed. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PB-S80 W-2 .11.844.921.21035/10, cutting current: 300 A, hose package length: 1,500 mm, working length: 1,500 mm, New torch hose package Kjellberg PB-S80 W-2 .11.844.921.21035/10 for Fine Focus 800 plasma system. Current new price: €8,600 – €6,500. The hose package is new and has not been used, only for the initial cutting test. The hose package length is 1.5 m. Itjdpfxjxbqdyo Aciol