Used Pneumatic Chisel for sale (7,457)

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, functionality: fully functional, The Jama SBU 8000 machine from 2012 is a robust and proven mechanical scaler, specifically designed for operation in demanding mining conditions, especially underground workings. This model is equipped with a hydraulic breaker for rock demolition, making it the perfect tool for removing loose rock fragments and preparing tunnels for further work. The listed machine comes fitted with an EPIROC breaker, including an additional new chisel. Attention! At the dealer, the price of a brand new JAMY machine is as much as €903,000 NET! That is for the machine only, without any additional equipment such as a demolition hammer. - We have 2 identical SBU 8000 machines on offer. The one in this listing is from 2012, and the other is from 2008 and nearly €10,000 cheaper! Also available: JAMA machine for concrete spraying in tunnels Designed for finishing and reinforcement work in underground passages and tunnels High efficiency, precise spraying and large operating range Ideal for use in mining, tunneling and major infrastructure projects Prsdpfx Alowl Izaocja Key Technical Features – Jama SBU 8000 Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below machine level to 9 m above, and over 6 m sideways Operator cabin: complies with FOPS standards, fitted with an armored front window and hydraulically controlled explosion-proof guard Chassis: two axles, turning radius 5.2 m Stabilization: four stabilizing outriggers and a front dozer blade Safety system: 'Danger Mode' function allows rapid machine retreat in case of danger Operator Comfort and Ergonomics The operator’s cabin is designed for maximum comfort and safety: Operator seat: pneumatically suspended Controls: joysticks integrated in armrests Visibility: 13° tilting cab for improved worksite visibility Additional features: boot washer at the entrance, doors with gas struts enabling quick cab exit if necessary Currently, we have three similar machines available: 2x Jama SBU8000 – 2012 & 2008, both with EPIROC breakers 1x Jama machine for concrete spraying Technical Specifications – Deutz TCD 2013 L04 2V/m Engine type: Four-stroke, inline, 4-cylinder Displacement: 4.8 litres (4800 cm³) Bore × stroke: 108 × 130 mm Compression ratio: 18:1 Fuel system: Common Rail injection (DCR) or mechanical Maximum power: 104–129 kW (140–173 HP) at 2200–2300 rpm Maximum torque: 565–670 Nm at 1600 rpm Idle speed: 650–900 rpm Fuel consumption (at full load): 208–218 g/kWh Weight (without accessories): approx. 500 kg Cooling: Liquid Direction of rotation: Counterclockwise (viewed from flywheel) The price given is NET and applies for export and business customers. Significant discounts are possible for individual buyers – We invite you to contact us directly by phone to secure your best price :)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Prsdpfozpxnvjx Alcoa Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Prjdpjyrn Sqsfx Alcsa

Condition: new, The new Holzprofi Profi feeder for band saws is characterized by its easy assembly and the great operator convinience. Feed rolls made of aluminium. Roll stop with pneumatic flap valve and mount casting. Technical data: Quantity feed rolls 2 Dimensions feed rolls 175 x 40 mm Speed 10 from 1 up to 15 m/min Engine power 375 W, 400 V Weight appr. 79 kg Podpfxovrv Ipo Alcora Technical data stop: Length 400 mm Height 200 mm Adjustment range 0-210 mm Roll diameter 20 mm Quantity of rolls 18 pcs.

Condition: used, Year of construction: 2007, ABAC Genesis 7.508 Air Compressor on Air Receiver Tank Working Pressure 8 Bar, Free Air Delivery 1.2m3/min, Power 7.5kW, Weight 390kg, Air Receiver Tank Cap 272 litres. S/No. 304263 001 (2007), Total Hours 7240, on Load 983. Country of Origin: Italy Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Prjdpfxozn Uvte Alcoa

Condition: used, Year of construction: 1991, Second-hand machine Prsdpfx Ajzk Npyelcea Year of manufacture: 1991 Features and technical specifications: - designed for all window tooling systems up to a tool diameter of 400 mm - thanks to the standard braking systems (foot brake for the slotted spindle, automatic electronic (Safety brake for the saw) allows the machine to be brought to a halt in just a few seconds - the protective covers for the slotted spindle and cross-cut saw are designed so that the tools can be easily and effortlessly can be replaced without having to remove the hoods themselves – the crosscut saw can be conveniently adjusted from the workstation using a quick-adjustment mechanism. A six-position turret head allows for quick adjustment to different dimensions - the 40 mm slotted spindle can be precisely adjusted in height using a conveniently positioned handwheel with 0.1 mm graduations – the sturdy roller table, in combination with hardened and ground guideways, can be moved easily with minimal effort - Slotted spindle motor: 5.5 kW - Slotted spindle speeds: 3,000/4,500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slotted spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Motor for cross-cut saw: 2.2 kW - Speed of cross-cut saw: 2,950 rpm - Saw blade shank: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping – with Festo LAS stop Weight: approx. 600 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system Pedpox H T H Rsfx Alcsra - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Prsdpfx Aev Tp D Helcja Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment Podsymf Tbspfx Alcora - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, diameter 400 mm boring diameter / mm - / SMW STP-315 Pneumatic rotary chuck 315 mm Prjdpfoymf U Sox Alcoa Diameter: 315 mm

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator Prsdpfoymf Raox Alcsa VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: good (used), Gas cylinder trolley, gas cylinder cart, steel cylinder cart Pjdjdz Tduspfx Alcora -Transport trolley: galvanized version -Tires: pneumatic -Quantity: 1 piece available -External dimensions: 760/520/H1320 mm -Own weight: 19 kg

Condition: new, feed pressure / bar Podpfx Aljy S Dz Nscera liter capacity / l total power requirement / kW

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning Podpfoy R S E Hsx Alcsra -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan -Quantity: 1 piece available -Price: per piece -Transport dimensions: 4000/1480/H1650 mm -Weight: 700 kg

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin Psdpfx Aoxybdhelcora

Condition: used, functionality: fully functional, machine/vehicle number: F222E01655W, Year of construction: 2022, operating hours: 4,500 h, load capacity: 46,000 kg, lifting height: 15,190 mm, fuel type: diesel, mast type: telescopic, construction height: 4,700 mm, power: 240 kW (326.31 HP), empty load weight: 71,900 kg, drive type: Diesel, Full Container Reachstacker Podpfxex H U R Rs Alcsra Chassis number: F222E01655W Mast type: Telescopic Transmission: SOH TE-30 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 18.00-25 Rear tires condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container handlers, reachstackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our homepage - hinrichs-Forklifts. Leasing, hire purchase, and financing under fair conditions are always possible for us. We also gladly purchase your used equipment outright, even if you do not buy a vehicle from us. Please call me, Marco Levermann, for detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop is specialized in the repair and maintenance of large machines from 8 tonnes upwards. We also gladly offer to sell your vehicle on consignment. Central lubrication, Movable cabin, full cab, air conditioning, joystick, camera, extra seat.

Condition: used, functionality: fully functional, machine/vehicle number: E1X357C00001, Year of construction: 2012, operating hours: 17,500 h, load capacity: 45,000 kg, lifting height: 15,900 mm, fuel type: diesel, mast type: telescopic, construction height: 5,120 mm, empty load weight: 72,100 kg, drive type: Diesel, Full-container reachstacker Chassis number: E1X357C00001 Load center: 1800 Mast type: Telescopic Transmission: Dana TE27 Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-25 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 18.00-25 Rear tire condition: 20 - 40% Pjdpfxsyyflrs Alcsra Description: nice running and working Sideshift, Full cab,

Condition: used, functionality: fully functional, machine/vehicle number: E1X357U00033, Year of construction: 2007, operating hours: 10,800 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, mast type: telescopic, construction height: 5,210 mm, power: 246 kW (334.47 HP), empty load weight: 79,780 kg, drive type: Diesel, Full container reach stacker Chassis number: E1X357U00033 Mast type: Telescopic Transmission: Dana TE 27 Technical condition: good Front tires type: Pneumatic Front tires size: 18.00 x 33 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 18.00 x 33 Rear tires condition: 40 - 60% Description: good running and working condition Podpfxoy A Ufgs Alcjra Side shifter, Camera, Central lubrication, movable cabin Work lights rear, work lights front, heating, full cabin,

Condition: used, functionality: fully functional, machine/vehicle number: M400464, Year of construction: 2013, operating hours: 1,473 h, lifting height: 2,900 mm, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,300 mm, fork length: 1,600 mm, Truck-mounted forklift Chassis number: M400464 Fork width: 100 mm Pedpey Scryofx Alcora Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: normal Front tires type: Pneumatic Front tires size: 23x8.5-12 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 23x8.5-12 Rear tires condition: 80 - 100% Description: In addition to this MAKE - MODEL, we currently have approximately 150 heavy-duty forklifts, container handlers, reach stackers, forklifts & terminal tractors in stock at our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase & financing on fair terms are always possible. We are also happy to purchase your used vehicle outright, even if you do not buy a vehicle from us. Feel free to call me, Marco Levermann, for comprehensive advice on this MAKE - MODEL. By the way: Our specialist forklift workshop is specialized in repair and refurbishment of large equipment from 8 t onwards. We can also display your vehicle for sale on commission at our location. Side shifter, 3rd valve,

Condition: used, functionality: fully functional, machine/vehicle number: E1X357S00047, Year of construction: 2005, operating hours: 11,110 h, load capacity: 39,500 kg, lifting height: 14,750 mm, fuel type: diesel, mast type: telescopic, drive type: Diesel, Full Container Reach Stacker VIN: E1X357S00047 Mast Type: Telescopic Prsdpsuh A Hfefx Alcoa Transmission: Clark Dana TE27 Condition: Ready for use and fully functional Technical Condition: Good Front Tire Type: Pneumatic Front Tire Size: 18.00-25 Front Tire Condition: 40 - 60% Rear Tire Type: Pneumatic Rear Tire Size: 18.00-25 Rear Tire Condition: 40 - 60% Description: The Linde has a spreader that can be tilted (tipping out the load), camera, central lubrication, side shift, tiltable spreader

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Psdpfx Asztqxzjlcera Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long Prjdpfx Asykn T Eslcea

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17 h, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 Prjdpeyap Uiofx Alcja • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: used, functionality: fully functional, machine/vehicle number: T34113.1424, Year of construction: 2008, operating hours: 14,021 h, load capacity: 45,000 kg, lifting height: 14,900 mm, fuel type: diesel, mast type: telescopic, construction height: 4,700 mm, empty load weight: 89,260 kg, drive type: Diesel, construction width: 4,200 mm, Full container reach stacker Chassis number: T34113.1424 Mast type: Telescopic Pjdpezuqblefx Alcera Technical condition: good Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 40 - 60% Description: Good running and working condition Side shifter Piggyback extra straddle Full cabin, air conditioning Central lubrication

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Pedpfx Aszuyp Eslcora Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm