Used Prince Capillary Zone Electrophoresis for sale (1,783)

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Compact, space-saving steel sheet construction. Chassis with wheels. Ijdpfx Ajbumr Sjpqsaw Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: used, Year of construction: 2001, Clamping force: approx. 200 t Components: 1 Mold mounting height: approx. 310 / 760 mm Iaedpfszl S U Iox Apqsw Opening stroke: approx. 320 / 575 mm Tie bar distance: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm L/D ratio: 1 / 20 Core pull: 4 Hot runner zones: 12 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 186 A Current 2: 102 A Current 3: 84 A Current 4: 67 A Weight: approx. 10.1 t

Condition: used, Year of construction: 2001, Operating hours: 73075023 Iasdpfx Aezl S N Espqjw Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 320 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Hot runner zones: 20 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 214 A Current 2: 105 A Current 3: 109 A Current 4: 67 A Weight: approx. 10.8 t

Condition: used, Year of construction: 2001, Clamping force: approx. 420 t Components: 2 Mold mounting height: approx. 651 / 1100 mm Opening stroke: approx. 400 / 880 mm Tie bar spacing: approx. 900 × 800 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 4 Special equipment: Needle gate Hot runner zones: 36 Flow rate: approx. 243 l/min Ijdpfxezl S Nle Apqsaw Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 156.5 A Current 2: 169 A Current 3: 100 A Weight: approx. 17.7 t

Condition: used, Year of construction: 2003, Operating hours: 61303927 Clamping force: approx. 200 t Number of components: 1 Horizontal screw diameter: approx. 45 mm Core pull: 2 Iedpozl S Hdefx Apqjaw Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 189 A Current 2: 152 A Current 3: 37 A Weight: approx. 10.1 t

Condition: ready for operation (used), Year of construction: 2015, This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. • Working area: 6,000 x 1,550 mm • Workpiece parameters: • Length (single setup): 6,000 mm • Length (pendulum operation): 1,550–3,200 mm • Width: max. 1,550 mm (with rear stop and milling cutter Ø25 mm) • Workpiece thickness: up to 275 mm including clamping devices; up to 60 mm with standard clamping equipment • Speed Pack: X-axis maximum feed 80 m/min • X-axis speed: 80 m/min • Tooling: • Tool transfer station on left side of machine bed • Disc-type tool changer: 18 positions • Capacity options: 18 x Ø130 mm tools, or 9 x Ø180 mm + 9 x Ø70 mm tools • Max aggregate length: 320 mm Iaodpfx Apox D Ra Hsqjw • No tools included • Main milling spindle: • 12 kW (S6) / 9.5 kW (S1) • Frequency-controlled 0–24,000 rpm • C-axis: • With aggregate interface; unlimited swivel range • Interface for FLEX-5 aggregate (aggregate not included) • Drilling head (30 spindles) – V20 / H10 / S360° “MPU”: • C-axis ±185° for drilling/sawing at any angle • 20 vertical high-speed spindles with quick-change • Vertical spindle layout (U-shape): 3 rows with 11, 3, and 6 spindles, 32 mm spacing • 10 horizontal spindles: 4 pairs at 32 mm spacing; 1 pair at 320 mm spacing • Grooving/separation saw: for blade diameters up to Ø200 mm • Table/base: • Grid table with slotted aluminum profile • Dynamic table area allocation (R-table): automatic part size check; vacuum zones permanently assigned to machining fields • Control/software: • POWERCONTROL PC 86 POWERTOUCH • 21.5" Full HD multi-touch display • WoodWop graphical, dialog-based CNC programming • Vacuum: Supplied via customer-side vacuum system (no integrated vacuum pump)

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, clamping force: 600 kN, screw diameter: 20 mm, displacement volume: 31 cm³, injection pressure: 1,470 bar, Injection molding machine ENGEL Victory 60-28 Tech Stock No.: 503700 Manufacturer: ENGEL Type: Victory 60-28 Tech Control system: CC300 Year of manufacture: 2018 Operating hours: 16500 h Iajdpfxsziz Edj Apqsw Technical data, clamping unit Clamping force: 280 kN Platen size h x v: 500 x 450 mm Minimum mold thickness: 150 mm Maximum mold thickness: 550 mm Opening stroke: 400 mm Ejector stroke: 100 mm Ejector force: 40 kN Mold weight: 450 kg Technical data, injection unit Screw diameter: 20 mm Injection volume: 31 ccm Injection pressure: 1470 bar Screw length: 24 l/d Screw stroke: 100 mm Screw speed: 360 rpm Free injection flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions L x W x H: 3.4m x 1.3m x 1.8m Total weight: 2900 kg Equipment Screen display in German Screen display in English Screen display in Polish Hydraulic core pull, 1x Air valve, 1x Screw with high wear resistance and corrosion resistance Interface for color dosing system

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 154 cm³, injection pressure: 2,429 bar, Injection molding machine KRAUSS MAFFEI KM 80-380 CX Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2019 Operating hours: 9000 h Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Opening stroke: 750 mm Ejector stroke: 150 mm Iaedpezizz Eofx Apqjw Ejector force: 23 kN Mold weight: 1000 kg Technical data, injection side Screw diameter: 35 mm Injection volume: 154 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 295 min Free injection rate: 96 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.5m x 2m Total weight: 3800KG Equipment Screen text in German Screen text in Polish CEE socket 16A CEE socket 32A Hydraulic core pull 1x Air valve 1x Leveling elements Schuko socket 10A

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, Injection molding machines KRAUSS MAFFEI KM 80-380 CX Stock No.: 503703 Iajdpfx Apjziy Udoqsw Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2021 Operating hours: 6000 h Technical data, clamping unit Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Maximum mold thickness: 750 mm Opening stroke: 500 mm Ejector stroke: 150 mm Ejector force: 43 kN Technical data, injection unit Screw diameter: 40 mm Injection volume: 201 ccm Injection pressure: 1860 bar Screw length: 20 l/d Injection rate: 295 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.4m x 2m Total weight: 3900 KG Equipment Screen text in German Screen text in Polish CEE socket 16A CEE socket 32A Hydraulic core pull, 1x Air valve, 1x Machine with water manifold Leveling elements High wear-resistant and corrosion-resistant plasticizing unit Interface for color dosing unit Schuko socket 10A

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : Iasdpozl Hz Nsfx Apqjw MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Iaodpozikcxofx Apqsw Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength:

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. Isdpfxszii A Ro Apqeaw The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Type: HO - U 400 SO Iaodpoziw Nxsfx Apqjw Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: used, Manufacturer: Koppens Model: ST14000/600 Condition: Used Serial Number: 35 Stock Number: 3397 Belt width: 600 mm Cooking length: 13000 mm Heating: Steam, 780kg/h (6 bar) Steam pressure: 4 - 8 Bar Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 14400 x 2000 x 2700 mm Weight: 4850 kg Temperature distribution in 2 zones, electric hoists Iedpszhmuhjfx Apqjaw

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units Isdpfoy Dr Hqex Apqjaw - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Condition: ready for operation (used), Year of construction: 2012, Edgebander manufactured in 2012. This ELWOOD EDL SOFT features a glue application system with a slot nozzle, compatible with EVA and PUR adhesives. It includes two profile milling units, IR heating lamps for material preheating, and a computer control for precise adjustments. If you are looking to get high-quality edgebanding capabilities, consider the ELWOOD EDL SOFT machine we have for sale. Contact us for further details. • Glue application: Slot nozzle; compatible with EVA and PUR; Meler glue melting and application system; electronically controlled glue temperature and melting time • Panel thickness capacity: 10–60 mm • Working units/stations: • 2 profile milling units • IR heating lamps for material preheating • Anti-adhesive agent spraying unit • Pressure zone with heated turret pads (replaceable with pressure rollers) • Edge band magazine • Front and rear end trimming units • Top and bottom flush trimming units for longitudinal edge overhang (2 top + 2 bottom) • Top and bottom buffing units • Control: Computer control for fast, easy, and precise adjustment of main machine functions and units Isdpfx Apszlggroqeaw

Condition: used, Year of construction: 2003, Clamping force: approx. 50 tons Components: 1 Horizontal screw diameter: approx. 30 mm Core pull: 0 Hot runner zones: 0 Flow rate: approx. 130 l/min Frequency: 50 Hz Power supply: 3/N/PE AC 400 V Iodpjzlhxijfx Apqjaw Pressure: approx. 210 bar Current: 94 A Weight: approx. 3.3 tons

Condition: used, Year of construction: 2022, Operating hours: 22932 Clamping force: approx. 550 t Number of components: 1 Mold installation height: approx. 350 / 1100 mm Opening stroke: approx. 1300 mm Tie bar distance: approx. 830 × 920 mm Iodpfxszlhdro Apqjaw Horizontal screw diameter: approx. 65 mm L/D ratio: 1 / 21.5 Core pull: 4 Special equipment: Additional unit (not for high glass fiber content); needle shut-off Hot runner zones: 32 Heating power: approx. 33 kW Frequency: 50 Hz Power supply: AC 400 V 3P/N/PE Current: 228 A Motor power: approx. 63.5 kW Installed power: approx. 137 kW Short-circuit rating: approx. 25 kA Machine weight: approx. 22.0 t

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Iaodpezlg S Ijfx Apqow Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Iajdpszlg N Hefx Apqjw Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t

Condition: used, Year of construction: 2014, Operating hours: 27,317 Clamping force: approx. 180 t Iajdozlgvyjpfx Apqew Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28

Condition: used, Year of construction: 2015, Operating hours: 52873 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Iajdszlgu Nepfx Apqsw Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 8877 Iaedpfx Ajzlgkdopqjw Clamping force: approx. 180 t Number of components: 3 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 34 Frequency: 50 Hz Supply voltage: 400 V Approximate weight: approx. 10.1 + 0.6 t

Condition: used, Year of construction: 2015, Operating hours: 48039 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t Iodpfx Aszlfmwspqeaw

Condition: used, Year of construction: 2022, Operating hours: 45851 Iedpfxezlfl Hs Apqoaw Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t