Used Rasamat Brush Deburring Machine for sale (64,806)

Condition: used, Year of construction: 1988, used, good condition cleaned, tested Nljdpfx Anjvwf Trjfea manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Year of construction: 2004, condition: used, - working width (mm): 400 - Brush: top and bottom - Spraying device Nsdpfx Anonl D U Iofola

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate Nlodpjw Hb Tfjfx Anfsa * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Nedohg Nuiepfx Anfjla Weight: 2t

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Njdpfeucw Dzex Anfsla

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Brush sanding and finishing machine / Universal brushing machine Nljdpfsxrlgqjx Anfsa Manufacturer: Leif Lorentz / Universal Finishing Systems Model: B 4 1000 Universally applicable as a finishing unit, for dust removal and workpiece cleaning, or for sanding Year of manufacture: 2005 Working width: 800 mm Belt width: approx. 850 mm Pass-through height: approx. 60 mm 2 brush units from above, each 1.1 kW, infinitely variable speed, 350–900 rpm Brush configuration as currently installed. Machine dimensions approx. 2400 x 1300 x 1700 mm

Condition: new, Brush cleaning machine Fabr. Cosma Type PL 500 CU1 Special version only for Ceetec expeller brushes Cleaning machines especially for Ceetec brushes used for painting and coating of solid wood workpieces A careful and min. daily cleaning of the dispelling brushes extends the life span and ensures a constant application quality. for brushes up to length 500 mm Mounting: 2x 500 mm Cleaning medium: water Stainless steel body Pneumatically operated, shaft speed adjustable Nlodpfx Asph Sr Senfja Functionality: The brushes will be mounted on a shaft. This shaft is inserted into the machine. The shaft is driven pneumatically and the brushes are rotated in the water bath and moved against a scraper. At the end of the cleaning process, the water is drained off via a valve and the brushes can be removed cleaned.

Condition: excellent (used), Year of construction: 2004, grinding height: 100 mm, working width: 250 mm, grinding width: 250 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Nljdpfx Anexvz Ulefea Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: good (used), Manufacturer: Graul Process: Electrolytic Polishing Process Sequence: E-polishing, multiple rinsing cycles Cycle Time: variable Maximum Load Weight: 50 kg Heating: electric Preheating Time: 3 to 4 hours Polishing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Usable dimensions: 770 x 200 x 400 mm Volume capacity: 315 l Heating power: 2.9 kW Rectifier Maximum DC output: 500 A Power consumption: 13.1 kW Dimensions: 490 x 300 x 912 mm Weight: 48 kg Single Rinsing Tank Internal dimensions: 970 x 500 x 700 mm External dimensions: 1,170 x 640 x 850 mm Volume capacity: 315 l Manual Rinsing Station Internal dimensions: 970 x 600 x 700 mm, open at the front External dimensions: 1,170 x 670 x 850 mm Total connected load: 17 kW Condition: ready for operation Nlsdoycid Nepfx Anfja

Condition: new, Year of construction: 2025, max. working width 300 mm number of brushing / polishing units 2 st. Nsdpov Ucilofx Anfsla Feed speed 10 m/min. Max. diameter of brush / polishing rollers 190 mm motor power per brush / polishing roller 4,65 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x950x1650 mm Weight 435 kg Nlodpfjv A Hdcox Anfja Total power requirement 4,65 kw

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,464 h, functionality: fully functional, machine/vehicle number: 0041, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 600 mm, workpiece weight (max.): 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Cubic travel area: 400 x 400 x 400 mm Nlsdpfx Answrr Tyjfsa Electromechanical adjustments Adjustment in Z-axis: up to 600 mm manually Travel in X,Y axes: ±200 mm each Rotation around A or B axis: ±45 degrees each Adjustment speed: 1 m/s Load capacity: 20 kg Operation Control: BOSCH REXROTH Connection data Connected load: 21 kVA Operating voltage: 400 V

Condition: new, Year of construction: 2026, functionality: fully functional, Rusticating machine for wooden artifacts such as bead boards,profiles.joists and floorboards ,with maximum width 40 or 60 cm x 30 cm height. Equipped with integrated 45 mm diameter motor-shaft assembly to ensure maximum rigidity, dynamically balanced brushes at high speed to work vibration-free. The machine consists of two brushing units that are independent of each other; the first unit (steel brush) is used for roughing while the second (silicon carbide brush) is used for finishing.It is possible to vary the degree of rustication by setting the working depth. Nodpfxjh Auu Aj Anfjla

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Working width: 600 mm Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Nedpfx Anoyf Dcljfola Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: new, functionality: fully functional, Aging brush machine Sarmax CHEYENNE SP2 400 working width 400 mm maximum working height 300 mm conveyor belt with adjustable speed 3–15 m/min Njdpfxeyf Av Re Anfjla includes steel brush and tynex brush Total power 7 kW technical documentation CE certificate Brand new machine available on order

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Nsdpfx Ajwiqukjnfsla Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl. OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Dema...

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Grinds and polishes open and closed pipe structures. For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. Nlodpfx Aeu Su Tzenfea With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw 1 fleece disc 100 mm wide Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system. Nodpow Hpfvofx Anfola

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1650 mm Weight 440 kg Njdjv A Hdiopfx Anfola Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1650 mm Weight 440 kg Nedev A Hdpjpfx Anfela Total power requirement 8 kw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, working width: 400 mm, total length: 2,150 mm, total height: 1,600 mm, total width: 1,000 mm, working height: 950 mm, input voltage: 400 V, year of last overhaul: 2025, power: 1.5 kW (2.04 HP), warranty duration: 12 months, compressed air connection: 8 bar, - DEMO machine from our technicial center for special price! - Since 1970 Ceetec A/S produces wood painting machines in Norre Aaby, Denmark. Nlodpsffc Rasfx Anfoa According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our brush painting machine A250 is equipped with flood nozzles for painting all around and with up to 8 brushes (each 2 per side) and can paint wood for interior and exterior on all four sides in one shift. Speed: 16-42m/min max. height: 250mm max. width: 250mm resp. 380mm (A380) min. length: 800mm It can be combined with our innovative drying systems or used as a stand alone machine. You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Do You have further questions? Please feel free to contact us whenever You want!

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg Nlsdpfx Ansnvdtcofea

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Lg.No. 20314 Nljdok H D Dfjpfx Anfja Technical data: steel - stainless steel - aluminum - plastic ,machining deburring and beveling operation is carried out with milling cutter support angle - bevel angle inclinable bevel angle adjustment 15 to 45 ° bevel width continuously adjustable 0 to 7 mm length of guide bar 500 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Condition: new, Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Nedsyqx Dbopfx Anfjla Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11,57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Nedpfx Ajt Hwylenfola Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.