Used Rheon Molding And Filling Machine for sale (70,527)

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed. Dksdpfx Ajzmrf Nsnzor

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Dkjdpfx Anjyrczgjzer Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Dkodpjzma Avofx Anzsr Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection

Condition: ready for operation (used), Year of construction: 2004, A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible. Dedpfoznx Hvjx Anzskr

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Operating hours: 42878h Djdpfx Anovkqfajzokr

Condition: used, Year of construction: 2017, operating hours: 38,672 h, machine/vehicle number: 214631, overall weight: 1,200 kg, This ENGEL Insert 500V/160 rotary vertical injection molding machine will be auctioned off online as part of our industrial auction/machine auction, location closure of J&S GmbH Automotive Technology - injection molding machines. You can find this and many other items on our platform. Year of manufacture: 2017 Serial number: 214631 Weight: 1,200 kg Operating hours: 38,672 hours (as of 02/2025, continued operation until 12/2025) with rotary platen with 2 x Single STL 1-12-30 TKN6, year of manufacture 2012/2013 with Piovan C5, year of manufacture 2017 with Piovan THW9 temperature control unit with Piovan MDP, year of manufacture 2013 with Universal Robots UR10e handling robot Functionality and technical data have not been verified Dkodszk Hg Njpfx Anzjr without additional items/without additional accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to reservation This lot will be auctioned off subject to reservation. After the auction closes, the seller will notify within 2 weeks whether or not the highest bid will be accepted. We will inform you promptly.

Condition: excellent (used), Year of construction: 2003, operating hours: 62,490 h, functionality: fully functional, clamping force: 160 kN, screw diameter: 45 mm, injection weight: 330 g, The Negri Bossi 160T in very good condition have full service history from Negri Bossi distance between tie bars 510X450 . Robot interface and two Hydraulic cores . Djdpezd U Diofx Anzokr

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Price fully refurbished: Ask for Quote Dkedezbg Euopfx Anzsr

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Dkjdpfjzgwbvex Anzor Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen Dsdpfx Anjzgwbcjzskr 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, KM 500-3500 C2 Year of manufacture: 2007 Dodpfx Aszgwa Eonzokr Operating hours in automatic mode: 60,000 h Clamping unit Clamping force: 5,000 kN Mounting plate dimensions: 1270 x 1310 mm Distance between tie bars: 900 x 800 mm Min./max. mold height: min. 480 mm Maximum opening stroke: 1,650 mm Injection unit Screw diameter: 80 mm Injection volume: 1,543 cm³ Shot weight: 1,404 g Injection pressure: 2,205 bar Electrical and hydraulic equipment Nominal pump motor power: 90 kW Heating capacity: 44 kW Dimensions and weight Net weight with control cabinet: 27,090 kg Dimensions (L x W x H): 7.65 m x 2.55 m x 2.55 m

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical data Dkodpfx Anszgv Uujzsr Year of manufacture: 2007 Clamping unit Clamping force: 1300 t Max. opening stroke/mounting height: 2300 mm Max. distance between platens: 4000 mm Min./max. mould height: 1000 - 1700 mm Max. platen height: 1910 mm Min. mould size: 1000 - 1700 mm Clear tie bar spacing: 1500 mm Nozzle radius: R40 mm Mould weight: 29000 kg Ejector stroke: 350 mm Injection unit Screw diameter: 135 mm Stroke volume: 8588 ccm Core pulls AWS/DS: 1/1 Needle shut-off pneumatics: 1 The machine is supplied with a Kuka robot and can be inspected in operation.

Year of construction: 1999, condition: excellent (used), INJECTION MOLDING MACHINE KRAUSS-MAFFAI 150-700 C1 Year of manufacture: 1999 Dkjdoh S Dncopfx Anzer Screw diameter: 55 mm In excellent condition, still in operation.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Dedpfx Aezl S Rponzskr The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermoset materials Current software version: IO4.26 The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026. In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of supply. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours: 1437 hours Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F) Switching temperature for oil cooling (HLP 32): 35°C (95°F) Switching temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37kW Motor voltage Frequency Water system: Oil cooler: Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F), NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones including nozzle: 5 Closing unit: SmartPower 210 Dedpfx Anezdywnjzjkr Clamping force: 2100kN Type: SmartPower 210 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is an injection moulding machine from the manufacturer Arburg, model 520 C 2000-800, year of manufacture 02/2006. Dkjdpfxsw Hpwrs Anzer The machine is in a very good, well-maintained condition. An on-site inspection is possible at any time by prior telephone arrangement.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, ENGEL V 330H/80V/130 Combi Cleanroom – 2-component injection molding machine, manufactured in 2006. The machine comes from pharmaceutical production and is designed for cleanroom applications. Technical data: • 33,107 operating hours Dodpfx Ajt A Ui Aonzekr • Screw diameter 25/22 mm • Machine weight 10,600 kg Available additional equipment: • GEKU SR 500 ST robot • Safety cage • Rotary table • Conveyor belt Location: Schwaigern, Germany. Further technical documentation and an inspection can be arranged.

Condition: used, Year of construction: 1998, machine/vehicle number: 145893, clamping force: 350 kN, screw diameter: 25 mm, clearance between the columns: 221 mm, displacement volume: 56 cm³, injection pressure: 2,500 bar, For sale is an Arburg injection molding machine, type Allrounder 221-75-350. The machine is in used condition. Technical data: ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co.KG Model / Type: Allrounder 221-75-350 Machine No. / Serial Number: 145893 Year of Manufacture: 1989 Machine Weight: 970 kg Clamping Force: 350 kN Clear Tie Bar Spacing: 221 mm x 221 mm Platen Dimensions: approx. 342 mm x 342 mm Opening Stroke / Stroke: 275 mm Tool Installation Height: 150 mm / 300 mm Max. Platen Distance: 425 mm Injection Unit: Screw Diameter: 22 mm / 25 mm Max. Injection Volume: up to 56 cm³ Max. Shot Weight: up to 50 g Specific Injection Pressure: up to 2500 bar Electrical Connection Values & Power: Operating Voltage: 380 V (3 phases) Mains Frequency: 50 Hz Heating Power: 3.46 kW Pump Motor: 7.5 kW Total Power / Total Connected Load: 11.0 kW Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Djdozki N Tjpfx Anzskr For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Machine type: Tie-Bar-Less Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: 88,000 h Technical specifications: Clamping force: 3000 kN (300 t) Design: Tie-Bar-Less Closing unit: Hydraulic POWER Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight (PS): approx. 1050 g Injection pressure: approx. 1700 bar L/D ratio: approx. 20:1 Control system: ENGEL CC200 Robot interface: Yes Robot: Not included Hydraulic core control: 2 units Power supply: 400 V / 50 Hz Hydraulic system: POWER Central lubrication: Yes Oil cooling: Yes Dedpfx Anjzrv A Nezjkr Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: 20,400 kg

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! General condition: The machine was in production use until recently. It is currently being sold as "in need of repair / for spare parts" (not functional due to damage to the internal hydraulic pump). Ideal for dealers, machine repair companies, or injection molding companies with their own repair facilities. Additional advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals, and complete wear ring sets). This will save you time in troubleshooting and provide the perfect template for the repair. Dkjdpfxozc Hn So Anzor Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Year of manufacture: 2006 Machine no. (serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and quick changeovers Tie bar diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for disassembly, packaging, loading, and transport. Inspection on site is possible after prior arrangement.

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Dodpjzrngyefx Anzekr Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Dsdpfsy Ttrmex Anzokr Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: used, Year of construction: 2009, Due to a relocation of our production facilities abroad, we now have two injection molding machines of the EL Exis / Sumitomo Demag brand available. These are the EL Exis S 200 - 840 and 300 - 1450 models, manufactured in 2009, which we would like to offer you on a non-binding basis. The machines have been operated in our facility on a two-shift system. Only clear, glass-like PP random copolymer was processed. In addition to the injection molding machines, the side-entry robots from Wittmann are also included in the scope of supply. Djdpjznwahofx Anzjkr

Condition: excellent (used), Year of construction: 2013, operating hours: 46,500 h, functionality: fully functional, clamping force: 130 kN, screw diameter: 37 mm, The Negri Bossi will looked after did low hours . The machine have full service history year of manufacture 2013 the machine have one single hydraulic core and on air eject Dedpfszcx Tmex Anzjkr

Condition: excellent (used), Year of construction: 2007, operating hours: 56,800 h, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition full service history still in production . The machine have one hydraulic core and one single air eject year 2007 . Dsdpfezcwv Tsx Anzekr