Used Sas Long Bending Machine for sale (67,524)

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Dkedoyrq Dvopfx Apwsl Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. Dksdpfx Aey Exdfjpwjl The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dsdpfx Apeyzc Iaowskl Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase Dkodpfx Apou H Ibnewjl

Year of construction: 1998, condition: as good as new (ex-display), machine/vehicle number: 3163, working width: 1050 mm Dksdpfxjbpythj Apwol metal sheet thickness: 1,5 mm upper roller-Ø: 70 mm below roller-Ø: 70 mm weight: 320 kg space needed: 700 x 1300 x 1100 mm

Condition: new, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 111/52, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: documentation/manual, foot remote control, For sale: New/unused Amob MAH 40/3 CNC profile bending machine. We purchased the machine new from Maqfort in 2022. Due to relocation of production and changes in the order profile, we found no use for the machine; it has not even been connected or commissioned. Therefore, it is a brand new machine. Equipment: Hydraulically controlled top roller feed / Can be operated in both vertical and horizontal positions / 3 mechanically driven rollers / Manually adjustable side rolls / CNC control / Movable foot pedal includes digital display, 2 pedals, emergency stop button / 3 standard (hardened) tooling rollers. Price: 25,153 euros. Dkjdoy Hn Uvepfx Apwsl In case of sale, Maqfort will provide installation, commissioning and staff training according to agreement.

Condition: used, Year of construction: 2010, working width: 2,500 mm, sheet thickness (max.): 1 mm, Manual bending machine Schroder. The machine is very sturdy, fully functional, good condition of the blades. Can be tested. Specification: Manufacturer: Schroder Model: Ak 2500/1.0 Year of manufacture: 2010 Working length: 2500 mm Bending thickness: 1.0 mm Dkjdpfx Apowq Dycowol Other: pneumatic clamping. No end support. If you have any more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this very good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder Dkedpfsywty Eox Apwsl with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm ROBOMAC 206 CNC wire bending machine General information Machine model: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / Registration: 9711026 CE marking: present Technical data Working range Wire diameter: approx. 2 – 6 mm Material feed Wire feed length: unlimited Feed accuracy: ± 0.05 mm Revolving arm Dodpeyt R Siefx Apwskl Positioning accuracy: ± 0.02° Rotation range left–right: infinite Arm length: 600 mm Bending heads Number: 2 Bending radii over mandrel: 1 to 15 mm Bending radii over roller with wire feed: 15 mm to infinite Positioning accuracy: ±0.02° Rotation range left–right: ±360° Programming time: 5 to 15 min. Time required for production changeover Without wire: 0 min With wire: approx. 30 min Power requirement: 6.3 kVA Dimensions Without safety barrier: 2.60 x 2.00 x 1.72 m With safety barrier: 4.50 x 2.00 x 1.72 m Net weight: approx. 2250 kg Typical applications - Wire-formed parts - Wire brackets - Metal hooks - Springs - Technical wire-formed parts for industrial applications Disclaimer All information is provided without guarantee. No liability is accepted for the accuracy, completeness and up-to-date nature of the technical data. Translated with (free version)

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Dksdpfx Ajfin E Depwol Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Djdsftdh Ijpfx Apwjkl Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Dksdpfx Apedzzyfewol

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Dsdeyw N H Uepfx Apwskl

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2100 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg Dkjdpfxjwiquqe Apwel MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20000 € 384 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed Dkjdpfx Ajyb Sz Ujpwsl 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 1.5 mm Dsdpoh Ralqjfx Apwekl - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Dkjdpoy D Ihwofx Apwjl Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual Dkodpfexabhmjx Apwsl

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec Dkedpfsxabtvex Apwsl return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t Dkjdsxabhaopfx Apwjl stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: D06L/7826, Offer Number: D06L/7826 Dkodpfx Apswi S Ewjwel Machinetype: wire and strip bending machine Make: BIHLER Type: GRM50 Constr. year: 1968/2016 wire diameter range: 0,5 -5,0 mm width of band: max 70 mm feeding length: max 320 mm output pieces/min: max 132 number of slides: 5 Location: In our warehouse

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D38E/8367, Offer Number: D38E/8367 Machinetype: chain bending machine Dodpfswi Ubzex Apwekl Make: WAFIOS Type: KER7 Constr. year: 1975 wire diameter: 10-16 mm feed legth: 100-250 mm pitch: 5x dia. output pieces/min: 25-50 Location: Europe

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: D38L/7176, Offer Number: D38L/7176 Machinetype: chain bending machine Make: WAFIOS Type: KZ60 Dsdpfxowi Sy Io Apwokl Constr. year: 1966 wire diameter: 2-7 mm output - pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: D06E/8463, Offer Number: D06E/8463 Dkodpfx Apjyya Nxowjl Machinetype: wire and strip bending machine Make: BIHLER Type: GRM100 Constr. year: 1993 wire diameter range: 10 mm width of band: 100 mm feeding length: 250 mm Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D06L/7646, Offer Number: D06L/7646 Dodpfx Apswi S Ncjwekl Machinetype: wire and strip bending machine Make: MRP Type: UB4 Constr. year: dia. range: 1-4 mm width of band: 20 mm output pieces/min: 80-150 feeding length: 240 mm Location: In our warehouse