Used Schenker Spring Winding Machine - Automatic for sale (75,927)

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Djdpfx Aoycqhcjpwsut Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Dodeyuthiopfx Apweut Type WM 2002/6 - 100, serial no. 2566

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: Nr. 960104, Spool winding machine DAK Graupner No. 418 Graupner spool winding machine, winding shaft for EI 135/52 Wire 1: 0.3 to 2.0 mm diameter Wire 2: 1.0 to 4.0 mm diameter Djdpjyuthcofx Apwout

Condition: used, functionality: unexamined, machine/vehicle number: 2045, Coil winding machine Frieseke & Höpfner type FW 200, machine no. 2045, no. 417 Djdpfoyutgxsx Apwsut

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, controller model: SIEMENS SIMATIC HMI, saw band length: 5,080 mm, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Belt length: 5,080 mm Material feed height: 1,200 mm Roller diameter: 630 mm Throat depth: 370 mm Max. cutting height: 320 mm Guide bar (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Belt speed: 250 – 2,000 m/min MACHINE DETAILS Dsdpfxsyng Ate Apwsut Control system: SIEMENS SIMATIC HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1834, overall weight: 325 kg, tool diameter: 160 mm, tool height: 230 mm, water tank capacity: 30 l, TECHNICAL DETAILS Maximum tool diameter: 160 mm Maximum tool height: 230 mm MACHINE DETAILS Water tank capacity: 30 L Dimensions & Weight Dimensions (L x W x H): 675 x 765 x 1650 mm Machine weight: 325 kg EQUIPMENT Grinding area made of aluminium Siemens touch-screen operator interface Information display for ongoing operations and alarms Dusdpfx Asyx Hwtspwst Automatic grinding height detection Automatic regulation of working pressure and grinding speed Straight or angled grinding possible Tool drawer High-quality grinding wheel (CBN) Water pistol for cleaning Operating light with different colors Integrated modem with remote connection port Spare grinding wheel Motor with frequency inverter for three-phase 380 V and 220 V power

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Dusdpfex Tg Diex Apwst

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, total width: 550 mm, total length: 380 mm, total height: 470 mm, overall weight: 25 kg, product width (max.): 250 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, year of last overhaul: 2026, Rondo Rondin Croissant Rolling Machine Suitable for all types of sticks and lye sticks, etc. Universal rolling/wrapping machine Dujdpex Ht Inofx Apwst Simple technology Only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions approx.: 550 x 380 x 470 mm (W x D x H) Refurbished used machine, SAB certified with warranty & spare parts service Options: Delivery service Service package E-Box for enhanced safety Maintenance contract Training & commissioning Visit us!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 03/2028, working width: 750 mm, conveyor belt width: 750 mm, type of input current: three-phase, total width: 966 mm, total length: 855 mm, total height: 714 mm, Baguette - long roller Model: Ultima with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park! Djdpfehwzkgsx Apwjut

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 03/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total height: 1 mm, Winding machine Model: MK 30 Dough weight up to approx. 250 grams Wrapping tape width 320 mm Plastic-coated feed rollers for all sticks such as Kornspitz and pretzel sticks, Universal winding machine Stainless steel version Input shaft with safety edge DGUV V3 tested Mobile croissant wrapping machine Connection 400V, 1 kW, 16A-CEE plug Dodpehfhpvofx Apwsut Used machine overhauled with 6 months warranty Visit our large bakery machines warehouse!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, total length: 700 mm, total width: 840 mm, total height: 940 mm, DGUV certified until: 03/2028, conveyor belt width: 750 mm, working width: 500 mm, type of input current: three-phase, Baguette - long roller Model: UNIC with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine with 24 months warranty Option: base infeed conveyor Dsdpfx Aohwzkcspwjut discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion Djdpfx Apsdzp T Nowsut - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Djdpfoxr Dlxsx Apwout

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Dujdoxr Dk Uopfx Apwot

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Dodpfx Ajfym Ewjpwjut Stepless. Machine little used in good condition.

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Dujdpfxeyfw H Re Apwot Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: ready for operation (used), Year of construction: 1995, Gubisch tenoning machine with 50mm stroke spindle, 3 tools at 100mm each, angle stop, automatic feed, and pneumatically adjustable crosscut saw. Gubisch Centromat profiler and scribing machine. 1st spindle with co- and counter-rotation and plunge function, 2nd spindle 40mm stroke with 2 tools, 3rd spindle 40mm plunge spindle with 1 tool, 4th spindle from above for glazing bead cutting. Includes Leitz IV 68 window milling tool with carbide reversible knife, including door and stationary window tool for 36mm putty rebate windows. Everything is completely matched. Only for sale as a complete set, pickup only, loading assistance provided. Dedpfx Apjytdvnowjut

Year of construction: 1996, condition: ready for operation (used), A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible. Dodsyttxfspfx Apwsut

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Model - PK8. Serial number - 1095. Date of manufacture - 1996. Dsdet Evzrspfx Apwsut Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm Dusdpfxjwvbk Aj Apwjt *

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Duedpfx Aowb A N Rspwjt Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Siat Semi-Automatic Pallet Wrapping Machine Wrapping Programs Program 1: Double wrapping with raising and lowering the film carriage. Program 2: Double wrapping with raising – pause for applying the pallet top cover – and lowering the film carriage. Program 3: Single wrapping with only raising the film carriage. Program 4: Single wrapping with raising the film carriage and pause for applying the top cover. Capacity: 1200 kg Turntable diameter: 1500 mm Adjustable turntable rotation speed. Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 Financing through our bank is also possible. komplett-konzept.leasingo.de Dusdpfxert U Sde Apwot Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), Automatic strapping machine Mosca RO-TRP-4 Dujdpfjt Srxgsx Apwjt Features: - Can be integrated into any line - Direct transport system with frequency control, adjustable from 0.15 - 0.8 m/s - IFM Ecomat 100 control unit with display - Hot welding system with electronic heating control - Fully automatic strap threading system - Adjustable strapping distance via the control panel - Adjustable strap tension - Determination of the strap end with ejection of remnants - Automatic ejection of the strap rings in the event of incorrect strapping - Structure painted blue - RAL 5010 The opening is 74cm wide and 53cm high Strapping capacity: Up to 46 strappings / min. Electrical power: 400 V, 50/60 Hz, 3 phases Consumption: 1.5 KVA Weight: 300 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, MC100 – Capsule Loader / Filler Semi-automatic filling machine model MC 100 for hard gelatin capsules with 100 holes, enabling the production of up to 3,200 capsules per hour. Duedpfoyktzujx Apwot The machine consists of a loader and a filler, both mounted on a separate base. The machine is supplied complete, including a powder pressing device and an electromagnetic vibrator to ensure uniform distribution of powder into the capsules. The machine is equipped with one capsule format, selectable between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5 and DB Caps can also be supplied. Technical data: Single base Machine dimensions: 650 x 380 x 410 mm Net weight: 30 kg Electrical connection: 1 Ph. 230 V, 50 Hz.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Dodpfxewz Rifj Apweut Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.