Used Scheuch Rohre Und Bögen for sale (5,538)

Condition: ready for operation (used), Siemens 1HU3058-0AF01 servomotor SN: E5K60666701003 without tacho and encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos. Hnsdpsx Dvglsfx Apysn

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: B SN:EA6319178, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Hjdpfx Asmq H S Eepysnn

Condition: ready for operation (used), Bosch SE-B2.020.060-04.000 brushless servo motor with brake and Heidenhain ERN 221.2123-500 encoder ID no. 270 675 02, serial no. as per photo, hole spacing of the mounting holes: 81 x 81 mm, Ø drive shaft: 14 mm, used, Hodpfji D Hdkex Apyonn

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hjdpfx Apstvct Heyonn

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Hedpfjx Etu Eex Apysnn

Condition: ready for operation (used), Siemens 1FT5064-0AF01-1 - Z permanent magnet motor SN BT928858822290 Z = brake (G45) and encoder system (G44), used, minor signs of wear, 100% functional, scope of delivery as per photos, Z see type plate Hjdpfstw I Susx Apyjnn

Condition: ready for operation (used), Siemens 6FC5247-0AF08-4AA0 hard drive with mounting bracket and damper for PCU 50.3 6FC5210-0DF31-2AA0, 6FC5210-0DF33-2AA0, 6FC5220-0AA31-2AA0, 6FC5220-0AA33-2AA0. Used, in like-new condition, 100% fully functional. Scope of delivery as shown in the photos. Hsdpfx Aox Eurxepyonn

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 32,700 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,050 mm, Diesel Forklift Load Centre: 1200 Fork Width: 200 mm Fork Thickness: 110 mm Mast Type: Standard Transmission: NEW Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Front Tyres Size: 14.00-24 Rear Tyres Type: Pneumatic Rear Tyres Size: 14.00-24 Hnodeu Dzq Rjpfx Apyen Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing & financing at attractive rates are always available. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide detailed advice on this SMV20-1200B. P.S.: Our forklift master workshop specialises in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshift, fork positioner, Heater, full cab, air conditioning, NEW ENGINE AND TRANSMISSION

Condition: used, mileage: 166,794 km, power: 74 kW (100.61 HP), first registration: 07/2012, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, * Engine warning light, possibly related to the particulate filter * Trailer coupling, special equipment: Rear wing doors with glazing, load compartment partition, high, behind driver and passenger, with window (deformable for driver's seat back) Additional equipment: Hnjdpfozdwtmex Apyjn Airbag, driver's side, turn signal integrated into exterior mirror, city lights, double locking system, tachometer, electronic differential lock (EDS), driving assistance system: hill start assist, rear wing doors (opening angle 180 degrees), heater with recirculation, body variant: medium-height roof, headlight range adjustment, engine 2.2 L - 74 kW TDCi CAT, production facility: Otosan, wheelbase 3300 mm, wheel covers, low emissions according to emission standard Stage 5 / Euro 5, sliding door, cargo/passenger compartment, right-hand side, mud flaps, front and rear, seat package 22: driver's seat (3-way adjustable) - passenger double seat, tinted glazing, lining in the cargo/passenger compartment: hard fiber.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, used incl. inner position angle angle width: approx. 20 mm angle length: approx. 2.170 mm angle rail width: approx. 18 mm angle rail length: approx. 2.170 mm F. Chipboard thickness up to: approx. 38 mm Material color: orange box profile: 90x40 mm agraffe: 4HK (hook) clear width: approx. 2.250 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Remark: An angle rail is welded to the crossbars. (angle rail - width: 18 mm / material thickness: 2.00 mm General information about the item: This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Hodpfxjh Et Sne Apyonn requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Hnsdpfx Aporg D Awoyjn Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table with extraction and filter The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Hjdpozdty Nsfx Apysnn Work area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L= 1500/2000 mm available) Compressed air connection: yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.5 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 dB(A) without cleaning / 85 dB(A) without cleaning Pipe connection: D=250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning via front button - Differential pressure manometer for easy monitoring of cleaning requirements - Integrated energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward curved, self-cleaning blades; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls and ceiling ensure effective extraction and comprehensive air guidance - Height-adjustable work table - Large range of mounting and connection accessories - Quality Made in Europe For safe and effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may include accessories.

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm Hsdpfxjyxxzwe Apyonn - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Hnjdpek H Ic Usfx Apyon Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: used,

Condition: used, mileage: 282,100 km, power: 188 kW (255.61 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2025, color: white, gearing type: mechanical, emission class: euro5, * VDL hooklift truck with flatbed + tarpaulin and tail lift body * Radio * Air conditioning * 3-seater * Manual transmission * 2nd axle steered * Flatbed with tarpaulin body and tail lift, electric side curtain -----Internal vehicle number: 11365 + 11365a1 + 11365a2----Errors & intermediate sale excepted Hjdpfjxhbkqsx Apyonn WhatsApp support available! If you have questions about the vehicle or want further information, feel free to contact us conveniently via WhatsApp Whatsapp German, English -- Whatsapp German, English, Arabic

Condition: used, mileage: 115,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 6040D ----Why autonext GmbH?---- Hnjdpfew Ndtxsx Apyjn One of the largest commercial vehicle exhibitions nationwide Over 400 vehicles immediately available Largest selection - Best price More than 1,000 satisfied customers every year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition!---- 1st owner, German vehicle, non-smoker vehicle Fully documented service history exclusively at Mercedes Benz Next service due in 631 days As-new rear brakes As-new all-season tires front and rear Loading lift system SPS for loading and unloading Save and Rescue: Loading lift system for personnel protection, TÜV certified according to DIN EN 795 up to 14 KN, EN 365 and TS 16415 Sortimo workshop interior fit-out Rear-wheel drive On request, we offer you retrofit installation of a tow bar for only €599, and if possible, an increase in towing capacity up to 3.5t ----Special Equipment:---- * Multimedia system MBUX (7" touchscreen) * Bluetooth hands-free system * Multi-function steering wheel * Park package with reversing camera * Reversing camera * 2nd battery (auxiliary battery) in cabin * Passenger side airbag * Acoustic package * Armrests on driver and passenger door * Mounting rails for roof rack * Driver-optimized gearshift console (without storage compartment, right center console) * DAB tuner (digital radio) * Entry handle rear right pillar * Chassis: Stabilization Level II * All-weather floor mats * Vehicle without chassis lowering * Cruise control * Rear door (opening angle 270 degrees) * Wooden cargo area floor * Terminal strip for electrical connections (driver's seat base) * Regulated air conditioning (Tempmatik) * Cable duct at rear portal * Cable duct at side wall * Side marker lights * Navigation system for multimedia system MBUX * Programmable special module * Tire pressure monitoring system * Spare wheel matching vehicle tires * Spare wheel carrier under rear frame incl. jack * Windscreen wipers with rain sensor * Rear mud flaps * Front mud flaps * Passenger side seat belt system with warning driver's seat, comfort headrest * Passenger compartment: dual passenger seat * Passenger compartment: heated passenger seat * Passenger compartment: heated driver’s seat * Passenger compartment: driver’s seat with lumbar support * Passenger compartment: comfort suspension seat, driver’s side * Passenger compartment: low driver’s seat base * Red fuel filler cap * Additional relay with second battery * Rear door step * Cargo/passenger area lining: tall wood (up to roof) * Cargo/passenger area lining: wheel arch lining (plastic) * Rear wall lining * Cargo area lashing rails – side wall at waistline * Cargo area lashing rails – side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Driver's compartment thermal insulation * Cargo/passenger compartment thermal insulation * Additional (air) heater, electric * Additional (hot water) heater * Additional heat exchanger * Intermediate stopper sliding door in cargo area Standard equipment: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver side airbag, anti-lock braking system (

Condition: used, mileage: 115,050 km, power: 105 kW (142.76 HP), first registration: 12/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 6040X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available. Largest selection – Best prices. More than 1,000 satisfied customers per year – Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition! 1 owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service in 631 days As-new rear brakes As-new all-weather tires front and rear Loading lift system SPS for loading and unloading Save and Rescue: Loading lift system for personnel protection, TÜV certified to DIN EN 795 up to 14 KN, EN 365, and TS 16415 Sortimo workshop interior Rear-wheel drive Upon request, we offer retrofitting a tow bar for only €599; if possible, also an upgrade for towing capacity up to 3.5t ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Park package with reversing camera * Reversing camera * Second battery (auxiliary battery) in the cabin * Passenger-side airbag * Acoustic package * Armrest, driver and passenger door * Mounting rails for roof rack * Optimized shift console for passenger (without storage compartment on right center console) * DAB tuner (digital radio reception) * Entry grab handle on rear right C-pillar * Chassis: Stabilization level II * All-weather floor mats * Vehicle without lowering * Cruise control * Rear door (opening angle 270 degrees) * Wooden floor in cargo area * Terminal strip for electrical connections (driver's seat base) * Regulated air conditioning (Tempmatik) * Cable duct at rear portal * Cable duct on side wall * Side marker lights * Navigation system for MBUX multimedia system * Programmable special module * Tire pressure monitoring system * Full-size spare wheel * Spare wheel holder under rear frame incl. jack * Windshield wipers with rain sensor * Mud flaps rear * Mud flaps front * Seatbelt system with warning system (passenger side) * Seat equipment: Comfort headrest, driver's seat * Cab seats: double passenger seat * Cab seats: heated passenger seat * Cab seats: heated driver’s seat * Cab seats: driver’s seat with lumbar support Hnsdpfew Ndt Ssx Apysn * Cab seats: comfort suspension seat, driver’s side * Cab seats: low-profile driver’s seat base * Red fuel cap * Additional battery split relay * Rear door step * Cargo/passenger compartment lining: high wood paneling (up to roof) * Cargo/passenger compartment lining: wheel arch lining (plastic) * Rear panel lining * Lashing rails in cargo space - side wall at belt line * Lashing rails in cargo space - side wall at roof frame * Fleece battery 92 Ah * Reinforced front axle * Thermal insulation, cab * Thermal insulation, cargo/passenger compartment * Additional (air) electric heater * Auxiliary heater (hot water) * Additional heat exchanger * Intermediate restriction sliding cargo door Standard equipment: 3rd brake light, storage compartment above windshield, storage compartment below instrument panel on passenger side, adaptive brake light, driver airbag, anti-lock braking system (

Condition: used, mileage: 537,942 km, power: 184 kW (250.17 HP), first registration: 06/2015, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, emission class: euro6, loading space length: 7,130 mm, loading space width: 1,630 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, soot filter, tail-lift, Hello! We are pleased to welcome you to our company. We hereby offer you the vehicle with the following equipment: Please leave us your telephone number in your message! * Engine 6,9 Ltr. - 184 kW Diesel * Wheelbase 4775 mm * Disc brakes * Permissible gross weight 15.00 t * Emergency Brake Assist * Comfort driver's seat * Automatic air conditioning * Combi tank - 220 liters of diesel + 20 liters of urea solution (AdBlue) * Sound system * Fog lights with cornering light * MAN-Tronic on-board computer * Compressed air connection at the front * EURO 6 engine * 9-speed gearbox - type: ZF 9 2-chamber system, both freezer and fresh service (up to -20g) Hsdeuirg Dopfx Apyjnn Dimensions large chamber: Width: 1.63m Length: 7,13m Height: 2.30m Dimensions small chamber: Width: 63cm Length: 7,13m Height: 2,30m Our services: - Fresh TÜV+ASU - Retrofitting of parking sensors - Germany-wide delivery - Test drive possible at any time - Attractive financing conditions - Vehicle deposit Opening hours also on Sunday by appointment TEL:

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Brakes: disc Axle: BPW + air suspension Hnjdswgghnjpfx Apyen 2x landing legs (JOST) Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Hsdexw S Ixopfx Apyonn Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: used, mileage: 200 km, power: 100 kW (135.96 HP), first registration: 01/2026, fuel type: diesel, fuel: diesel, color: white, emission class: euro6d, Year of construction: 2025, Equipment: ABS, UVV, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, ON-BOARD COMPUTER, drive type: all-wheel drive, soot particle filter, windshield wipers with rain sensor, central locking with remote control, heated windshield, sliding door for loading/passenger compartment on the right, tire pressure monitoring system, low emissions according to the Euro 6d emissions standard, load compartment partition without windows, automatic door locking, Power KeyFree start function, audio system: digital radio reception (DAB / DAB +) with 13 multifunction display and SYNC 4, Ford SYNC 4 with AppLink and touchscreen, metal load compartment partition, low emissions according to the Euro 6e emissions standard, electric front windows with quick-down / quick-up control on the driver / passenger side, second key with remote control that can be folded down, induction charging cradle for mobile devices, door unlocking (2 stages) including locking by slamming the door, spare wheel as an emergency wheel, exterior mirrors that can be folded down electrically, anti-lock braking system (ABS), exterior mirrors that can be folded down electrically. adjustable and heated, electric windows, USB interface, traction control, driver's seat armrest, A-pillar grab handle, automatic (8-speed), hill start assist, indicator light integrated in exterior mirror, rubber floor covering in the driver's cab, brake assist, electronic. Stability program, wrong-way driver warning function, electric parking brake, FordPass Connect including eCall, lockable glove compartment, rear wing doors (opening angle 90 degrees), heating with recirculation, intelligent acceleration control, body/structure: box, automatic climate control, fuel tank: 70 liters, LED cargo area light, truck registration, engine: 2.0 liters - 100 kW EcoBlue CAT, fatigue warning, emergency call system, pre-collision system, headlights with automatic dimming, rear mud flaps, front mud flaps, seats in the driver's cab: heated driver and front passenger seats, seats in the driver's cab: driver's seat with lumbar support, seat package 11A: driver's seat (4-way adjustable) - passenger double seat, fabric, lane departure warning system, lane change warning system, start/stop system... Subject to changes, prior sale and errors. Hedpeyk Rm Ujfx Apyjnn

Condition: used, Year of construction: 1997, operating hours: 6,799 h, load capacity: 3,500 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift F 35 U Hsdpfx Apoulli Eeyenn Unladen weight: 5,200 kg Powered by LPG and petrol Very good condition Side shifter Trade-in & Exchange Possible Would you like to trade in or exchange your used vehicle? We are happy to purchase your old vehicle at market value. Please send us your vehicle details by email or give us a call. Registration Service: We are happy to assist you with the application for temporary license plates and export license plates. Despite careful data collection and vehicle assessment, discrepancies in equipment details, scope of delivery, or technical data may occur. The information is for vehicle presentation purposes only and is non-binding. Interim sale and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of purchase law. The contractual description is decisive.

Condition: used, Year of construction: 2021, operating hours: 5,400 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version * with ripper Hedsytadhjpfx Apyenn The machine has only 5,400 operating hours and is in like-new condition.

Condition: used, Year of construction: 1999, operating hours: 7,835 h, load capacity: 3,000 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift A 30 U Unladen weight: 4,100 kg Runs on LPG and petrol Very good condition Sideshift Trade-in + exchange possible Would you like to trade in your used vehicle or exchange it? We are happy to purchase your old vehicle at market price. Please send us the vehicle details by email or call us. Registration service: We are happy to assist you with the application for temporary license plates and export plates. Despite careful data collection and vehicle assessment, there may be discrepancies in equipment data, scope of delivery, and technical specifications. The information is provided to present the vehicle and is non-binding. Interim sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in terms of contract law. The description in the purchase agreement is decisive. Hedpjulltwefx Apyjnn