Used Screw Compressor Belt 15 for sale (29,765)

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Serial number: 202210301 Operating hours: 1,160 h Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Ijdozwxp Aopfx Aa Rotl Pressure vessel Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The Iodpfozu Aibjx Aa Retl micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Ijdpfx Aoudy Sdea Rstl

Year of construction: 1997, condition: good (used), Build in 1997 Power 75 KW Pressure: 9 bar Isdpfx Aasg A Dyps Rjtl

Condition: used, Year of construction: 2005, feed pressure 10 bar Ijdpfx Aovuz Rhsa Rstl liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Iedpfxowrrgms Aa Rstl Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Itedpfeym Axzox Aa Rjl Maintenance carried out by Kaeser

Condition: new, Year of construction: 2025, new compressor with warranty (we are official dealers). discounted price. list price euro 25441. possibility of combining Atlas Copco dryer (available). latest technological model. main features: max bar 10 power 15kw-20hp air flow liters7min 3000 for detailed technical sheet do not hesitate to contact me. Itedpfx Aaewcm Hio Rel

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, overall weight: 410 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 0.6 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: refrigerant dryer, New screw compressor for sale, available from stock. First-time commissioning has been completed. Simply plug it in and get started... Technical data: Drive power: 5.5 kW (also available with 4.0 kW) Controlled by a frequency converter (no high inrush current) Tank volume: 300 l Maximum pressure: 10 bar With refrigerant dryer 3-stage filter unit Automatic condensate drain Quiet operation thanks to sound insulation 1 year warranty 4250 CHF including VAT Itsdpfozt Nrtox Aa Rsl Feel free to come by for a viewing. Also, check out my other listings.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,667 h, PROD. KAESER TYPE ASD57 T S/N 1187 YEAR 2007 POWER (kW) 30 CAPACITY (m3/min) 4.65 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 9667/21953 VARIABLE FREQUENCY DRIVE no Ijdpfxjztqvyj Aa Rjtl BUILT-IN DRYER yes, R134a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: good (used), Year of construction: 1999, Screw compressor, Renner, screw compressor RS-PRO 7.5, soundproofed, incl. refrigerant dryer ECOTROC KTD-B100 – used: Price ex works: €2,950.00 (net)! Manufacturer: Renner Type: RS 7.5-10 Itodpfx Aaszbydqj Rsl Year of manufacture: 1999 Serial No.: 1992 Article number: 07500001 Rated power: Motor speed: Max. operating pressure: 10 bar Power consumption: 7.5 kW Delivery rate: 950 l/min Operating hours: approx. 4,342 h (as of 21.04.2026) Weight: 198 kg Incl.: Manufacturer: KSI FILTERTECHNIK Type: ECOTROC KTD-B100 Serial No: 31-11-MA11834 Max. pressure: 16 bar Nom. capacity: 97 m³/h Max. amperage: 2.1 amps Fuse amperage: 4.0 amps Refrigerant: R134a Refrigerant quantity: 0.75 kg Voltage: 230V / 1 / 50 Hz Power: 0.35 kW Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: excellent (used), Year of construction: 2009, PROD. KAESER TYPE ASD47 S/N 1150 YEAR 2009 POWER (kW) 25 CAPACITY (m3/min) 1.07-5.27 PRESSURE (bar) 8.5 Itedpez Dg Haofx Aa Rjl HOURS (RUNNING/TOTAL) 67466/78928 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. Isdszv Ei Hjpfx Aa Retl The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Itjdpfxexdbubs Aa Rel Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Ijdpfx Aszh Nizsa Rstl

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Itjdpfsxy S H Tsx Aa Rsl

Condition: used, Year of construction: 2017, operating hours: 19,178 h, functionality: unexamined, machine/vehicle number: APF220681, power: 160 kW (217.54 HP), operating pressure: 10 bar, pressure (min.): 8.5 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco ZR 160 VSD compressor is an ideal option for those who need reliable and efficient performance in an industrial environment. Even though it is a used model, it maintains its efficiency and reputation for durability. It can operate at a maximum pressure of 8.5 bar, making it suitable for various types of applications requiring constant and stable air compression. Equipped with unique VSD (Variable Speed Drive) technology, this compressor adjusts its speed to optimize energy consumption, which can significantly reduce operating costs. This is a particularly valuable feature in facilities where compressed air requirements often fluctuate. Itsdpfx Asyx Ez Dja Rjl Built by ATLAS COPCO, a leader in the field of compressed air solutions, the ZR160 VSD is synonymous with advanced technology and robust design. Despite being a used model, this unit guarantees high reliability and is capable of meeting the most stringent industrial requirements while ensuring excellent energy performance.

Condition: used, functionality: fully functional, overall weight: 1,700 kg, total length: 2,600 mm, total width: 1,200 mm, total height: 2,200 mm, motor manufacturer: Schorch, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,404 m³/h, Used Sabroe SAB 163 BF NH3 screw compressor on a steel base frame. Complete with a Schorch KN7250S-AB014-152 electric motor - 50 Hz - 90 kW - 2960 RPM, Sabroe OHU 6022 D oil separator, safety switches and a UNISAB II system controller. Iodpfxotix U Dj Aa Rjtl

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Ijdpfxetx Akns Aa Retl Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.

Condition: new, Year of construction: 2023, feed pressure 10.0 bar Effective free air delivery 700 L/min motor 400 V Itjdpfxjxaahxe Aa Rsl 0 250 Liter weight of the machine ca. 397 kg. total power requirement 5.5 kW range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Itjdpfx Aaov Al Nqs Rel Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Depth: 860 mm Height: 1500 mm Weight: 520 kg Itsdpfx Ajvmpt Usa Rel

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Iodpfxel Dxmfj Aa Rjtl

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 60 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 7.5 kW / 10 bar (also available as a 4 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure tank refrigerant dryer fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Highly efficient, permanent magnet servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Ijdpfx Aaozpfwwj Rjtl technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 280 kg Pressure: 10 bar Flow rate: approx. 0.9 m³/min at 10 bar Noise level: 60 ± 2 dB(A)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Isdpferkpp Hjx Aa Rstl Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.