Used Sgb 2000 22/0,4Kv for sale (14,923)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Rcsdpfx Akoy Thdkohjb -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm -Total weight: 2.1 kg

Condition: used, Year of construction: 2000, Arburg injection moulding machine in good condition. Can be inspected in operation upon appointment. Availability: 06/2026 Clamping force: 2500 kN Distance between tie rods: 630 x 630 mm Rcsdpfxjy Sxlcs Akhsb Shot gewicht: 826 gr Injection pressure: 1470 bar Screw diameter: 70 mm

Condition: used, Year of construction: 2020, carrying capacity 500 kg weight 930 kg dimensions 1250 x 2590 x 1500 mm Rcedpfx Aksvg R U Tohob Operating instructions available technical data see attached PDF

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Rjdpfxoy S Rnio Akhscb -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: good (used), Year of construction: 2021, operating hours: 4,896 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 600 kg, mileage: 4,896 km, This STILL electric tow tractor is from 2021 and is in good condition; The tractor has a capacity of 2,000 kg; Maintenance-free gel battery from 2021 with external charger; 4,896 hours logged; Watch the video on YouTube. Rsdpfx Akex Av Dhohscb

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm Rcedpfov Tpxqjx Akhsb -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Year of construction: 2023, condition: excellent (used), functionality: fully functional, TOP workbench AT 2000 with beech wood top and drawers Beech wood worktop with a raised edge at the back Drawer unit on the left Storage shelf on the right at the bottom Stainless steel design Dimensions approx.: 2000 x 800 x 980 mm, W x D x H Used equipment, cleaned Quality from a specialist company! Benefit from over 35 years of experience Visit our large showroom! Rcsdpsxiu I Eefx Akheb

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 2,000 mm, total height: 870 mm, Year of construction: 2024, Work table AT 2000 with stainless steel top and drawers Work table, baker’s table Stainless steel worktop with back splash Drawer unit on the left Stainless steel flour cart for approx. 100 kg Sliding door and intermediate shelf on the right Stainless steel design Rodpfx Aoxmra Tskhecb Dimensions approx.: 2000 x 800 x 870 mm, W x D x H Used equipment, in new condition We have a large selection of work tables!

Condition: used, axle configuration: 2 axles, first registration: 01/1999, wheelbase: 1,810 mm, color: other, Year of construction: 1999, Number of axles: 2, Payload: 16,280 kg, Unladen weight: 3,720 kg, Gross weight: 20,000 kg, Suspension type: full air suspension, BODY HEIGHT OF 3.10 M POSSIBLE, EXTENDABLE DRAWBAR, MOUNTING FOR KOIAAP (TRAILER-MOUNTED FORKLIFT), LZV (long/extra-long vehicle) = Further information = General Information Cab type: Day cab Registration number: WV-35-KD Technical Information Fuel type: Diesel Transmission: Manual gearbox Weights Unladen weight: 3,720 kg Payload: 16,280 kg Gross vehicle weight: 20,000 kg Environment Emission class: Euro 0 Condition General condition: very poor Technical condition: very poor Visual condition: very poor Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy at Kleyn Trucks? It’s simple! • Large and quickly changing inventory • Recognizable quality • Good prices • Proper commercial conduct Rcedpfjy Rx Sgjx Akheb • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of ‘recognizable quality’ • And more… Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2007, operating hours: 4,575 h, machine/vehicle number: 0300115918, mast type: telescopic, fuel type: diesel, Empty weight: 16.974 kg Lifting capacity: 230 kg Working height: 2.820 cm Dimensions of cargo space: 1220 x 249 x 305 cm Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Rodpfxoy E E A Uo Akhscb Tyre brand: Outrigger Max. horizontal reach: 2290 m Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 8,599 h, machine/vehicle number: 0300120924, mast type: telescopic, fuel type: diesel, Empty weight: 16.992 kg Lifting capacity: 230 kg Rcsdsxt Db Nepfx Akhob Working height: 2.820 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2290 m Transport dimensions (LxWxH): 12.2x2.49x3.05 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 7,896 h, machine/vehicle number: 0300122941, mast type: telescopic, fuel type: diesel, Empty weight: 16.980 kg Lifting capacity: 230 kg Rsdpew Un U Rofx Akhecb Working height: 2.820 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2290 m Transport dimensions (LxWxH): 12.2x2.49x3.05 Please contact PFEIFER GROUP for more information

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, overall weight: 21,000 kg, table length: 2,100 mm, table width: 800 mm, controller model: TNC 7, coolant supply: 20 bar, spindle motor power: 30 W, rapid traverse Z-axis: 20,000 m/min, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), table load: 2,000 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 2000 Machining Center – available for immediate delivery The LAGUN L 2000 machining center stands for high precision, robust design, and economical production. Ideal for single-part manufacturing as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers are impressive due to their reliability, ease of maintenance, and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 CNC control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Rcodpofdxi Usfx Akhjb Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast supply of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Rcjdpjy R Npijfx Akhob Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V Rcedpfey Emthex Akhob - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, warranty duration: 24 months, machine/vehicle number: 2026, NEW +++ NEW Bakery Refrigerated Counter BKT 2000 +++ NEW For quick and flexible use Top-quality stainless steel design 600 x 400 mm sheet metal insert Adjustable cooling range from +2 to +8°C Fan-assisted cooling Energy-saving hot gas/condensate evaporation Unit is ready for plug-in operation Refrigerant R 600a Connection: 230V Dimensions: 2020 x 800 x 860 mm (W x D x H) NEW unit With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Grids/sheet metal Additional pairs of support rails Maintenance contract Service package Delivery service Rcodpfxoxp Ugus Akhsb Instruction and commissioning Visit our large showroom!

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Redpfx Akexxb Rrohocb

Condition: used, Year of construction: 2003, x-travel 2.000 mm y-travel 1.000 mm z-travel 1.200 mm control TNC 430 Heidenhain turning speed range - main spindle 20 - 5.000 min/-1 transmission ratio 2 power capacity - main spindel 30 (100%) / 45 (40%) kW Torque 1.050 / 1.580 Nm tool taper HSK 100 swivellable B: +/- 180 ° indexing B: 0,001 ° table surface area 1.000 x 2.000 mm max. table load 4.000 kg flute distance 100 mm T-slots 18 H7 number of T-slots 10 number of toolpositions 40 pos. tool taper HSK 100 tool changing time 10 sec max. tool diameter 250 mm max. tool length 400 mm max. tool weight 20 kg feed speeds X,Y,Z: 0 - 20.000 mm/min Rcodpfx Aexmag Ijkhob feed speeds B: 10 1/min output X,Z: 15,7 / Y: 8,5 kW output B: 2,5 kW feed power 22'500 N weight of the machine ca. 23 t dimensions of the machine ca. 8,0 x 8,0 x 3,3 m 4-Axis CNC Machining Center - Universal REIDEN - BFR 22 - incl. 2x tool cabinets for collets - incl. 3x pull-out cupboards - incl. 1x workbench - incl. Ringler chip extractor

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm Rcsdpfx Aev E R E Nekhsb spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm Rsdpfsvy Ig Tex Akhocb spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000 - incl. 2x Workbench

Condition: excellent (used), Year of construction: 2011, Top Tower 3000 mixer Year: 2011 Capacity: 200 tonnes/hour Total material processed: 800,000 tonnes Redpexz Um Esfx Akhjcb

Condition: used, Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Mechanical rear roller conveyance Rsdomhm Elspfx Akhscb Emergency stop switch Conical rounding possible

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 2,000 mm, total height: 890 mm, TOP Work Table AT 2000 with Beechwood Top and Flour Cart Work Table, Baker's Table Beechwood Worktop 3 Ingredient Containers on the Left Stainless Steel Flour Cart for 100 kg Right Side Storage Shelf Stainless Steel Construction Dimensions approx.: 2000 x 800 x 890 mm (W x D x H) Used machine, cleaned Top sanded & newly oiled Option: Delivery service up to production area Rcjdpsytl Edjfx Akhsb New Casters / Wheels Many more work tables available from us!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 2,000 mm, total height: 890 mm, total width: 800 mm, Work table / baker’s table with beech wood work surface robust with storage shelf underneath stainless steel version Dimensions approx.: 2000 x 800 x 890 mm, WxDxH Rcsdewv E N Aepfx Akhsb Used equipment, cleaned Surface sanded and re-oiled We have many more tables in stock!

Condition: used, plate width 2870 mm plate depth 2000 mm plate height 300 mm weight 5200 kg flute distance 250 mm 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots; 36 x 64 mm - height: 45 mm Rcsdpfey S Dziex Akhob Weight: KG