Used Trumpf Punching Laser Machine for sale (65,010)

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm Fpsdpfx Adoi Db Ibecsh ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: good (used), Year of construction: 2007, shaft length: 1,064 mm, Internal article number: 26037 Laser welding machine Rofin Starweld 90 Fodpfx Adsy D Nlqjcoph Year of manufacture: 2007 YAG laser Power: 4.5 kW Laser power: 90 W Pulse peak power: 5.5 kW Pulse duration: 0.3 - 20 ms Wavelength: 1064 mm Dimensions (L x W x H): 100 x 50 x 100 cm Measured without table and mounting Weight: approx. 170 kg Unfortunately, I cannot put the system into operation because it needs to be connected to a water circuit with deionized water. Furthermore, an error message appears indicating that the fiber optic cables need to be checked. According to the previous owner, however, this is related to the water circuit.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, cutting speed: 8,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 700 kg, power: 4 kW (5.44 HP), type of cooling: water, overall weight: 2,680 kg, total length: 4,890 mm, total width: 2,300 mm, total height: 2,290 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530G Fiber Laser Cutting Machine – compact, reliable, and immediately available from Germany The SENFENG SF1530G is a compact and efficient fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideally suited for metalworking companies, job shops, and manufacturing companies looking for reliable cutting quality, ease of operation, and an economical entry point into fiber laser cutting. Fedpfx Aeqwzuxedceph The machine is available with a Max laser source. Depending on the configuration, laser powers from 1.5 kW to 6 kW are available. The cutting head can be chosen between Raytools and Bochu, allowing the machine to be flexibly adapted to different production requirements. The SF1530G features a robust welded machine bed, a lightweight, high-strength aluminum beam, and an intelligent CNC cutting system. This combination ensures stable operation, good dynamics, and reliable cutting accuracy in daily use. The positioning accuracy of the X/Y axis is ±0.05 mm, and the repeatability reaches ±0.02 mm. With a maximum speed of 80 m/min and an acceleration of up to 0.8G, the machine enables efficient processing of various sheet metal materials. The automatic focus cutting head reduces manual adjustment effort and improves cutting efficiency for different materials and material thicknesses. The zone-based extraction system supports a cleaner working environment and stable cutting conditions. The machine is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Typical applications include sheet metal processing, mechanical engineering, switch cabinet construction, stainless steel processing, signage, lighting fixtures, kitchenware processing, and general metalworking. Your advantages: • Working area: 3000 × 1500 mm • Max laser source, 1.5–6 kW available • Cutting head can be chosen between Raytools or Bochu • High cutting precision with repeatability up to ±0.02 mm • Maximum speed up to 80 m/min • Automatic focus cutting head • Robust welded machine bed for long-term stability • Intelligent CNC control for ease of operation • Zone-based extraction for better working conditions • Compact design, ideal for limited workshop space • TÜV-CE certified The machine is in the warehouse of SENFENG Germany and is available for short-term delivery. SENFENG Germany offers local installation, commissioning, operator training, and after-sales service. In addition, SENFENG Germany has a local spare parts warehouse to enable fast service support and reduce potential downtime. The SF1530G is a practical solution for companies looking for reliable laser cutting performance, a compact design, local service in Germany, and an attractive price-performance ratio.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 20 mm, working length: 1,300 mm, working width: 1,300 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, cutting speed: 8,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 300 kg, power: 1 kW (1.36 HP), type of cooling: water, overall weight: 1,900 kg, total length: 2,985 mm, total width: 2,160 mm, total height: 2,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1313G compact fiber laser cutting machine – available from Germany Fsdoiqnv Dopfx Adcsph The SENFENG SF1313G is a compact fiber laser cutting machine with a single table for precise and efficient sheet metal processing. With a working area of 1300 × 1300 mm and a laser power of up to 6 kW, it is ideally suited for workshops, job shops, and manufacturing companies looking for a space-saving and high-performance laser cutting solution. The machine is particularly suitable for small and medium-sized sheet metal parts, prototype manufacturing, and flexible small-batch and series production. It can process stainless steel, structural steel, aluminum, copper, galvanized sheet metal, nickel, and other metal materials. The fully enclosed design increases operator protection and reduces laser radiation, smoke, and dust. The side-pull-out work table facilitates loading and unloading. The zone-based extraction system supports a clean working environment during the cutting process. The SF1313G features a reinforced, welded machine bed and a high-strength aluminum beam. This design ensures stable operation, good dynamics, and reliable cutting accuracy. With an X/Y positioning accuracy of ±0.05 mm, a repeatability of ±0.02 mm, and a maximum speed of up to 100 m/min, the machine offers precise and efficient cutting performance in daily use. Key technical data: • Working area: 1300 × 1300 mm • Laser power: up to 6 kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability: ±0.02 mm • Maximum speed: up to 100 m/min • Fully enclosed design • Side-pull-out work table • Zone-based extraction system • Automatic adjustment of auxiliary gases • TÜV-CE certified Typical applications include metal processing, mechanical engineering, advertising technology, household appliance production, elevator components, automotive parts, refrigeration equipment, and general sheet metal processing. The machine is currently in the warehouse of SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers local installation, commissioning, operator training, and technical service. In addition, SENFENG Germany maintains a local spare parts warehouse to enable fast service support and reduce potential downtime. The SF1313G is an economical solution for customers looking for a compact machine, high cutting precision, reliable performance, TÜV-CE certification, and strong local service in Germany.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser power: 3,000 W, sheet thickness (max.): 3 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 100 mm, feed rate Y-axis: 15 m/min, workpiece weight (max.): 15,000 kg, power: 3 kW (4.08 HP), type of cooling: water, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1503CH Laser Blanking Line | Coil Laser Cutting System 3–6 kW For sale is a SENFENG SF1503CH Laser Blanking Line, a fully automatic coil laser cutting system for processing thin sheet metal directly from the coil. The system combines unwinding, leveling, feeding, laser cutting, and unloading in a continuous production line. It is particularly suitable for manufacturers who want to automate their series production, reduce material handling, and improve material utilization. Application areas: Suitable for automotive suppliers, switchgear and housing construction, mechanical engineering, construction and agricultural machinery, kitchen and sanitary industries, metal furniture, medical technology, facade and decorative elements, and general sheet metal processing. Processable materials: Carbon steel, stainless steel, galvanized sheet metal, and other suitable coil materials after technical evaluation. Technical data: Model: SENFENG SF1503CH System type: Coil laser cutting system / Laser blanking line Laser power: 3–6 kW Working area: 3000 × 1500 mm Coil thickness: 0.8–3.0 mm Coil width: 600–1500 mm Max. coil outer diameter: Ø 1400 mm Standard coil inner diameter: Ø 508 mm Max. coil weight: 10,000 kg Feeding speed: 0–15 m/min Feeding length: 0–3000 mm Positioning accuracy X/Y: ±0.05 mm Repeatability X/Y: ±0.02 mm Power supply: 380 V, 50 Hz, three-phase Protection class: IP54 Possible equipment / configuration depending on the offer: Depending on the configuration, the system can be equipped with a loading cart, unwinding unit, feed and leveling unit, sheet metal positioning and alignment system, laser cutting unit, CNC cutting system, operator interface, cooling system, safety monitoring, and unloading or material take-up unit, among other features. Optionally, depending on the project requirements, protective film lamination, marking system, safety fence/light curtain, nesting software, and dust and fume extraction can be included. The exact equipment, brands of key components, and optional extensions are determined in the individual offer. Advantages: Fully automatic process from coil to finished cut part Reduced manual material handling High material utilization through coil processing and nesting Precise sheet metal guidance through correction and alignment system Leveling technology for stress reduction and improved flatness Suitable for continuous series production Intelligent CNC control with process database Automatic selection and control of auxiliary gases possible Fpsdpfjt Huugex Adcjh Description: The SENFENG SF1503CH was developed for processing thin coil material. Compared to conventional sheet metal cutting, the system reduces several intermediate steps such as separate unwinding, external leveling, manual loading, and individual handling of sheet metal. The coil material is picked up, unwound, leveled, and then precisely fed to the laser cutting unit. The integrated leveling technology improves the flatness of the material and reduces internal stresses before the cutting process. The system is particularly suitable for companies with a regular need for flat sheet metal parts, recurring contours, and series production. Inspection, technical consultation, and quotation upon request.

Condition: used, Year of construction: 2012, CNC laser cutting system Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Fpjdsx Eh Dropfx Adcjh Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3626

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Fpedpfx Adeza E S Djcjh

Year of construction: 2021, condition: ready for operation (used), Max. working area: 3048x1524mm, max. workpiece weight: 900kg, max. positioning speed: 100m/min, max. acceleration: 1.0G, positioning accuracy: 0.05mm, repeat positioning accuracy: 0.03mm, screen size: 21.5 inches, max. laser power: 4kW, max. sheet thickness carbon steel: 20mm, max. sheet thickness stainless steel: 12mm, max. sheet thickness aluminium: 10mm, max. sheet thickness brass: 6mm, laser source: MAX, laser head: Bodor Genius, software: Bodor Pro 2.0, length: 4960mm, width: 2280mm, height: 2200mm, weight: 7.5t. Equipment: heavy-duty machine bed made of spheroidal graphite cast iron, aluminium crossbeam, 4kW MAX laser source, Bodor Genius laser cutting head with autofocus, Bodor Pro control system, 21.5-inch touchscreen monitor, Yaskawa servo motors and drives from Japan, SMC oxygen control valve from Japan, SMC nitrogen control valve from Japan, active crash protection function, automatic lubrication system, Wi-Fi control, automatic pressure regulation for oxygen and nitrogen, Schneider Electric relays, automatic shutdown when the door is opened, laser fault alarm, chiller fault alarm, cutting fault alarm function, cutting gas low-pressure alarm function, laser safety glasses for the operator, water chiller, with complete system documentation, operating manual and electrical diagrams, extraction system, spare laser head, laser source, wear parts and accessories, valid CE declaration of conformity. An on-site inspection is possible. Fpedpfx Asza E R Tjdcsh

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Fpodpoy Tmcxofx Adceh Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Trumpf TruPunch 2020 Fpsdoy S Adpspfx Adcsh

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. Fodorcb Hqepfx Adceph COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T Fpjdpfxjzbrpro Adceh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The used HBS GQ 20A1 laser marking machine with rotary axis is a fully enclosed, all-in-one unit equipped with a 20W fiber laser, a rotary axis for engraving cylindrical parts, and an integrated PC system. With a standard marking area of 110 x 110 mm, a motorized Z-axis, and a compact, wheeled structure, it is very practical. Manufactured in 2018, CE compliant, complete with manuals, and in excellent condition, as shown in the photos. Fedjzburvjpfx Adcoph

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm Fsdpfx Asg Rgvhsdcsph X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks.

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm Fodpfx Adswrkcyscsph or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies PierceLine Fedpfx Aoy S U N Rsdcsph FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Table 3050 x 1550 mm Pressing force 220 kN Fsdpfszcd Hrsx Adcjph Max. workpiece weight 280 kg Sinumerik 840 D Machine weight 17 t Axes: X ... 6500 mm Y ... 310 mm Z ... 170 mm A1 ... n x 360 A2 ... n x 360

Year of construction: 2013, operating hours: 19,392 h, condition: used, machine/vehicle number: 1683, (Beam in), TRUMPF CNC control, X-axis: 3,000 mm, Y-axis: 1,500 mm, laser power: 5 kW, loading and unloading table, chip/part conveyor. Fsdpfx Ajy T Ny Tsdcoph

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Fpsdpfx Adoyxc Afjcsh

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Fpsdpey Dgrnsfx Adcjh Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: like new (used), Year of construction: 2017, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Recess: mm 510 Working height: mm 955 Stroke length (punch) from 0 up to mm 40 Fpjdpfewm Emvjx Adceh Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Motor power kw 4. Large hole device up to diameter 46mm included in the supply.

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control - FSCUT 5000 Software - Cypnest+Hypcut, Tubest + Tubepro Laser head - Boci BLT442 Nitrogen proportional valve - Oxygen, nitrogen, air Power stabilizer - 120kVA Water chiller - Hanli Load capacity up to 3200kg Laser power - 12,000 W Cutting area - 4050x2030mm Tube cutting area - Outer diameter: 15-240mm Length: max. 6000mm Fpjdpfownqydex Adcoh Weight: max. 200kg X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 5000 Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Fpjdpjwnqbzefx Adcjh Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Power supply - 380V 50Hz three-phase

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Fjdjhv U Tqopfx Adcoph Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Fodpfxjhwhf Re Adcjph Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING