Used Twinner T4 Quadra-Chek 200 Measuring System for sale (52,682)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Fsdpfxeyzfkks Adcegc Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Fjdpfxjxuqv No Adcjgc Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately

Condition: ready for operation (used), IEC71L28-LC-FA2 series LC three-phase motor water cooled 400V , 200 HZ , 12 kw , IP65 , B5 - flange design, centering diameter 110 mm, 4 x bore Ø 9 on pitch circle 130 mm, shaft smooth 28 x 6 x 60 mm, rated speed: 12000 rpm, Max. Speed: 16000 rpm, dynamically balanced, coolant connection M14 x 1,5 , manufacturer unknown, used, normal traces of use, 100% functional, scope of delivery according to photos Fgedpfsi D Id Rjx Adcec

Condition: used, weight max. in kg / kg fork length / mm stroke height / mm HOPPECKE battery charger D400 45.6/200 FT B-FRFT Fsdsy Tbu Nepfx Adcjgc Battery capacity: 104Ah Battery Rated Voltage: 45.6V Charging Voltage: 1.60Vpc Umax shutdown: 1.68 Vpc Charging current: 200A Degree of protection: IP21 Article number: 516742

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/2003, next inspection (TÜV): 01/2027, emission class: euro3, color: beige, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, 1st owner. Original mileage: only 19,700 km driven. With service history (maintenance booklet). Fjdpfx Adjyyfr Sjcjgc Last service scheduled for 2025 at 17,983 km: engine, transmission, and rear axle oil replaced, as well as timing belt renewed. Tires were also replaced at the same time – fitted with Semperit winter tires (DOT 2023/2024). Manufactured 02/2003 and first registered 11/2003. One of the last T4 syncro models produced. Long wheelbase. Originally, vehicle was technically equipped ex-works for standard passenger car registration as a 9-seater. However, this registration was removed directly in the original registration document, as the vehicle was exclusively and continuously used as a special purpose (emergency) vehicle. So far, the actual registered type has always been “Other vehicle - water rescue emergency vehicle”. Currently, 5 seats are registered and present. All seats are robust, low-maintenance faux leather. Rear is fitted with SORTIMO shelving, previously used for rescue equipment and uniforms. Empty weight according to documents: 2270 kg. Gross vehicle weight: 2890 kg. Overall exterior dimensions of this VW T4: length 5,107 mm / width 1,840 mm / height with special signal equipment 2,100 mm (without blue lights: 1,920 mm). Right-side sliding door and rear barn doors. Dent on the left rear. All doors function perfectly and open/close without any unwanted noise. WEBASTO AirTop 3500D auxiliary heater. Tow bar with 2,000 kg towing capacity braked / 750 kg unbraked. Maximum permissible towing weight: 4,500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 cc. 102 hp. Engine code: AXL. 5-speed manual transmission. Differential lock. ABS. Power steering. Driver and passenger airbags. Remote central locking – 2 original VW remote keys included. Electric windows and electrically adjustable exterior mirrors. Maximum speed entered in documents: 155 km/h. The T4 was recently driven over 600 km on the motorway without issue. Vehicle runs excellently and is in good original condition. TÜV valid until 01/2027. This offer is only valid for businesses and freelancers of all kinds, as well as public authorities / emergency services. Sale to private end consumers is not permitted. Subject to prior sale and errors. The syncro is available with us immediately.

Condition: used, Kompaktanlage zur Herstellung v. Stempeln, Eindruckklischees und Photopolymerdruckplatten. Compact system for the production of stamps, imprint clichés, and photopolymer printing plates. Fgjdpfx Adjza H Srscsc Es können sowohl Flüssigphotopolymer (Resin) als auch Photopolymer-Plattenmaterial verarbeitet werden. Both liquid photopolymer (resin) and photopolymer plate material can be processed. Belichter Klischeeherstellung / Photopolymer Platemaking AZ System 2000 Serial-No. 277 Plattenformat / Plate Size max. 23 x 33cm Mit 9 Arbeitsprogrammen Maschinendaten: Maße / Size Breite / Width 52cm, Tiefe / Deep 47cm, Höhe / High 95cm Gewicht / Weight ca. 62kg Elektrischer Anschluss / Eletric supply 220Volt, 1,3 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Fgedpfsx R D Efjx Adcsc Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Fedpey N R Iqsfx Adcogc

Condition: used, mileage: 2,996 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,390 kg, first registration: 09/2024, emission class: euro6, color: silver, suspension: steel, number of seats: 5, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, trailer coupling, LG7 LED High-Performance Headlights, E07 Hill Start Assist, E2Z MBUX Multimedia System incl. Navigation & DAB, Q10 Crossmember for trailer hitch, FR8 Reversing Camera, E1K Navigation Package, EX8 Navigation Plus, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Mounting, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, T68 Child Safety Locks for Doors and Windows in Passenger Compartment, Z1M M1 Registration, IA0 Wheel Formula 4x2, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T78 Sliding Door Track Cover in Body Color, Y10 First Aid Kit, VL2 Velour Floor Mats, SF6 Height-Adjustable Driver’s Seat with Lumbar Support, RD9 Tyres Without Specified Brand, H00 Warm Air Vent to Passenger Compartment, NM5 MB-NA 60 2b with Flange, Lowered, M-Speed, C6L Multifunction Steering Wheel, H22 Heated Rear Window, JW8 ATTENTION ASSIST, EM7 2 USB Ports in Rear Center Console, Z5L POWER STANDARD, Y44 Warning Triangle, GA2 Automatic Transmission for Electric Drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 VIN Visible from Outside, SZ6 Table and Illuminated Trim on Backrest, JH3 Communication Module (LTE) for Digital Services, X30 Registration Certificate Part II, FQ3 Glove Compartment, Passenger Side, Closed, I5T Plastic Underride Protection, RY2 Tyre Pressure Monitoring on Front Axle. We are happy to provide you with a customized financing or leasing offer and will accept your used vehicle as a trade-in. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage, partial repainting may have been carried out as part of reconditioning. No liability for printing and typographical errors. Subject to change and prior sale. Click features may include digital extras, which can be fully or subscription-based via MercedesMe, possibly subject to a charge depending on duration. ... more on our homepage Fsdpfx Adeydu N Hjcogc

Condition: used, mileage: 265,425 km, power: 75 kW (101.97 HP), first registration: 10/2000, fuel type: diesel, overall weight: 2,680 kg, color: white, gearing type: mechanical, number of seats: 3, Equipment: all wheel drive, * Volkswagen T4 Synchro 2.5 TDI * Long panel van Fedpfjyt Al Uox Adcjgc * All-wheel drive * Manual transmission * VIN: WV1ZZZ70Z1H044253 * Engine type: ACV * kW: 75 * Displacement: 2461 cc * Unladen weight: 2,680 kg * Payload: 605 kg * Gross vehicle weight: 2,000 kg * Axle load: 1,430 / 1,430 kg * Margin taxation * All information provided without guarantee ---- Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) Fgodpfx Aex D D Hmodcjc • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: good (used), Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology Fedpfx Adjwya Egscjgc -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg

Condition: excellent (used), Here we offer a SUN-TEC cleanroom heating plate. SUN-TEC cleanroom heating panel Cleanroom workstation with heating plate Fsdpfx Asd Nfq Sedcogc 1600 mm x1200 mm x2200 mm Nomination: AC 200V 3 phases 50Hz 30A Max temperature: 200°C Type: Y9AT417 Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Fgodeymqz Rspfx Adcoc terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Fjdpfx Adoymqzkjcjgc delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to deliver unsurpassed performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea. Automatic calibration and automatic data correction ensure greater accuracy of topographical data. Automatic focusing and simple exam paths improve usability, accelerate the exam process, and virtually eliminate any focus discrepancies between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspheric image processing algorithms. Simultaneous patient and operator positioning allows for closer interaction with the patient during the exam. Easy to use Autofocus and correction Automatic save and print functions Interactive help system Intuitive exam path Versatile and flexible Comprehensive diagnostic and surgical displays Personalized exam protocols Customizable displays and reports Multi-card comparison tools Accurate and reproducible Focus verification Artifact detection and correction Calibration verification Scope of delivery: 1 x EyeSys System 2000 1 x Intel PC with EyeSys software, monitor, keyboard, cable set Dimensions: 80 x 65 x 75 cm Fsdpfsd Srnpox Adcogc Weight: 55 kg Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Fsdpfoylz Aisx Adcegc terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Feeders: KR497BW Conveyor: KR314-6 KR840RF Infeed Roller KR519F50 Vacuum Firejet, overall weight: 600 kg, type of input current: AC, input voltage: 230 V, input current: 230 A, total width: 820 mm, total length: 3,430 mm, total height: 845 mm, input frequency: 5,060 Hz, This envelope printer is for sale from the factory its in excellent working condition, ready to work, if necessary we can arrange try out on a scheduled meeting in Hungary, or we can do an online show off. Fjdpsxzfq Ujfx Adcsgc

Year of construction: 1999, condition: excellent (used), Fanuc Robot LR Mate 200iB + Fanuc system Robot control unit year of manufacture 2004 Fodsxr Dbmepfx Adcsgc

Condition: used, Year of construction: 2002, total width: 600 mm, total length: 600 mm, total height: 800 mm, Colour: Grey Empty weight: 50 kg Price: On request Fgsdpfx Adsyu Sl Hjcoc - Year: 2002 - Documentation available: No - CE certificate present: No - Serial number: 97370 - Transport dimensions: 600mm x 600mm x 800mm (l x w x h) - Transport weight [kg]: 50kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, Overview This Ishida IX-GA-4075-D X-ray inspection system was manufactured in 2008 and is designed for high-performance product inspection in food, beverage, and pharmaceutical production environments. The system is primarily used for foreign body detection, identifying contaminants such as metal, glass, stones, and high-density plastics that may not be detected by conventional metal detectors. In addition to contamination detection, the machine can also support product integrity checks, such as identifying missing components or estimating product consistency. The system is built with a robust stainless steel construction, making it suitable for industrial environments with high hygiene requirements. The inspection process is based on X-ray imaging, where products pass through the inspection chamber via conveyor. The system analyzes density differences in real time and automatically triggers a reject mechanism if contamination is detected. Technical Data Construction: Stainless steel frame for hygienic industrial use HMI: Integrated touchscreen for operation, calibration, and product changeover Electrical Data Power supply: AC 230 V, single phase Current: 11.0 A Frequency: 50 / 60 Hz Inspection Function Detection of foreign bodies: Metal Glass Stones High-density plastics Additional capabilities: Product integrity verification Detection of missing components Density-based inspection Fgjdpeyzc D Usfx Adcsc

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Fgjdpjyxxxvsfx Adcec

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 250 kg, BIG BAG DISCHARGER Capacity: 2000 kg Painted tubular steel frame Fjdpfx Aswxrcusdcsgc AISI 304 stainless steel hopper with adjustable suction.

Condition: used, This listing is for a Pall Allegro 200 L Single‑Use Mixer System. Fgedpfjxl Dxlex Adcjc The unit is in full working condition and is ready for immediate release. The Pall Allegro 200 L single‑use mixer (model LGRMXTTE200L230B) is engineered for scalable, robust mixing in biopharmaceutical operations. It is part of Pall’s Allegro single‑use technology portfolio and is designed for applications from media and buffer preparation through final formulation. Built with proven engineering principles and compatibility with Pall’s Allegro biocontainer film formats, it offers ease-of-use, reproducible performance, and minimal validation burden. Key Features 4‑Pitch Blade Impeller – Effective, low-shear mixing over a broad range of conditions. Bidirectional Flow Capability – Able to run clockwise (up‑flow) or counterclockwise (down‑flow), accommodating different density fluids and solids. Bag Inflation System – Mixer bag inflation provides a controlled mixing envelope, allowing consistent performance across 50–200 L volumes, and supports gas blanketing. Flush Drain Valve – Helps avoid dead legs by removing settled materials that might otherwise be left unagitated. Retention of Allegro Film Materials – Uses the same film as standard Allegro 2D/3D biocontainers for material consistency, reducing requalification effort. Optional Baffle Kit – To mitigate air entrapment at higher rotational speeds for shear-sensitive processes. Technical Specifications Parameter Value Model / Part Number LGRMXTTE200L230B Operating Volume Range 50 – 200 L Voltage / Frequency 230 V AC, 50 Hz Current Draw ~5.1 A Motor Power 0.37 kW Rotation Speed Range 50 – 200 rpm Materials of Construction Mixer tote in 304 stainless steel; film, manifolds, ports in LDPE / PS / silicone etc. Weight (empty system) ~120 kg Footprint (W × D) 1,054 mm × 748 mm Height 1,378 mm Gas Supply Requirements 4 – 6 barg (for bag inflation / blanket) Operating Temperature Range 4 – 40 °C Connections / Ports Inlet, gas inflation, exhaust, flush drain, powder addition ports etc. Applications Upstream Media Preparation – Efficient mixing of culture media and supplements. Downstream Buffer Preparation – Rapid homogenization of buffers or reagents. Final Formulation / Filling – Gentle mixing for drug products. Powder Addition / Reconstitution – Capable of handling solid-liquid mixing (e.g. powders) with repeatability. Shear-Sensitive Biologics – Low shear impeller design suitable for sensitive proteins or biologics. Benefits & Validation High Performance Mixing across Conditions – Demonstrated capability to mix a wide range of systems including liquid-liquid, solid-liquid, and viscous solutions with good speed and uniformity. Validated Materials & Safety – Components meet USP /, USP , , endotoxin limits, gamma-irradiation compatibility (up to 50 kGy), and leak-tested containers. Reduced Validation Overhead – Using the same film materials as existing Allegro biocontainers helps streamline requalification and process transfer. Minimal Dead Volume / Entrapment – Flush drain valve and optional baffles help prevent accumulation of settled solids. Scalable & Flexible – Supports operations from 50 L to 200 L with consistent mixing performance.

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Fjdpfsxrc Acex Adcjgc