Used Wagner Strehlen - Threading for sale (2,604)

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories * Bdedpjw D Aq Tjfx Ab Deg

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. Bdedpfxoxbzgxj Ab Dog If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second Bdodpfsw Sgnksx Ab Deg - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: refurbished (used), DKV III continuous press with braking unit Completely overhauled Optional with original hydraulic motors or with servo motors Options: - Chain threading - Co-rotating cut-off saw Function: For pressing the dovetail joint without stopping (in a continuous process). The upper and lower plate chains generate the feed force. Downstream braking plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite a relatively slow feed rate - Absolutely no vertical displacement of the dovetail joints Technology: Heavy-duty plate chain 2", pneumatically adjustable Braking elements are floating Press force measurement via contact manometer Height adjustment electrically Maximum press force adjustable and dependent on feed rate and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed rate adjustable 10-70 m/min Drive power Adjustment of infeed unit 1 kW Adjustment of brake 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ratio thickness - width 6 : 10 Wood cross-section with 15/16.5 mm tenon max. 90 cm² Bdjdpfov T Aqysx Ab Dog

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Bdedpfxowwmkde Ab Dog Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Year of construction: 1994, Thread Rolling Machine EWMenn GW63 Bedpfxjylw E Ts Ab Dsdg Flat dies Year: 1994 Diameter range: max 8 mm Shaft length under head: 80 mm Max. thread length: 58 mm

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Bedpfx Aeyl U Tusb Dedg Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: excellent (used), Thread ring gauges (45132) Available as a set or individually M33 x 1.5 M42 x 2 M50 x 1.5 M58 x 3 6g M35 x 1.5 M42 x 2 6h M50 x 1.5 6h M60 6h M36 M42 x 3 M52 x 1.5 M60 x 2 M36 6g M42 x 4 M52 x 1.5 6h M62 x 1.5 6g M36 6h M42 x 4 6h M52 x 2 6h M62 x 2 6h M36 x 1.5 M45 M52 x 3 6h M36 x 1.5g M45 6h M55 x 2 M36 x 1.5 6h M45 x 1.5 M56 M36 x 2 6g M45 x 1.5 6g M56 x 2 M36 x 3 M45 x 1.5 6h M56 x 2 6h M36 x 3 6h M45 x 2 M56 x 3 M38 x 1.5 M48 M56 x 3 6h M38 x 1.5 6h M48 x 1.5 6h M56 x 4 M39 x 6h M48 x 3 6h M56 x 4 6h M39 x 1.5 M48 x 4 M58 x 1.5 6g M40 x 1.5 M48 x 6h M58 x 2 Bdjdpfx Abjyu N N No Djg M42 x 1.5 M58 x 2 6h M42 x 1.5 6h

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M14E/9142, Offer Number: M14E/9142 Machinetype: flat die thread rolling machine Info: with washer assembly Bsdpey Dc Eksfx Ab Dodg Make: TLM Type: RP10 Constr. year: 1992 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 60 mm output - pieces/min: 320 Location: Europe

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet Bjdpfxozxz Azj Ab Dsdg - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: ready for operation (used), KUKA 1FK7103-5AF81-1YY3-Z S17 servo motor, serial number: YFV950655147011 - Connector with a small crack at the thread, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bdedjzvaf Nepfx Ab Dsg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Bdedpfx Ajzu N Abob Dog Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar Bdsdpfjzx D A Dox Ab Dog - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: used, Manufacturer: Hensoldt Wetzlar Bodpoy Tbwwsfx Ab Dedg Centering microscope with tightening thread, e.g. for capping machines.

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) Bsdpfx Aoy Tp E Ajb Dsdg - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: excellent (used), functionality: fully functional, Thread milling machine Brand: WANDERER Model: 31L1000 Turning length: 1000 mm Bdodpfoy Rgmxjx Ab Dog Height above cross slide: 125 mm Spindle bore: 80 mm Swing over bed: 420 mm Tool diameter: 120 mm Spindle speed: 55–250 rpm

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Bdjdpfx Asy Saqgeb Dog Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), Year of construction: 1998, FOR SALE: ORT ITALIA RP 24 Thread Rolling Machine Precision machine for thread forming, ideal for high-performance industrial production. Capacity & Technical Details Pressing force: 24 tonnes. Brand: ORT Italia. Model: RP 24. Year: 1998 Power supply: 380V / 20A. Equipment Bodpfx Aoy Shd Ijb Dedg Automation: Integrated automatic loading. Control: Digital control panel. Ejection: Discharge chute included.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Bsdpozav Dwjfx Ab Dsdg -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece

Condition: used, mileage: 326,000 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, loading space length: 8,000 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, MERCEDES-BENZ ATEGO 1530 – BOX BODY WITH HEATING – STAND-ALONE AIR CONDITIONING – SLEEPER CAB – 2 BUNKS – LBW 2 TON – FROM 1ST OWNER – VEHICLE HISTORY – GERMAN VEHICLE – FROM 1ST OWNER – WELL-MAINTAINED VEHICLE – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – MERCEDES-BENZ ATEGO 1530 – HIGH ROOF WITH SLEEPER CAB – AUTOMATIC TRANSMISSION – ENGINE BRAKE – CRUISE CONTROL – AIR CONDITIONING – STAND-ALONE AIR CONDITIONING – STAND-ALONE HEATER – LANE KEEPING ASSIST – ACTIVE BRAKING SYSTEM – 2 XL BUNKS – REFRIGERATOR – FULL AIR SUSPENSION – BOX BODY WITH INSULATED WALLS – WAGNER BOX BODY – HEATING SYSTEM IN THE BOX BODY Bdjdpfezlw Exsx Ab Deg – LIFTGATE MBB (2,000 KG) – TRAILER COUPLING – TOOLBOX – SPARE TIRE (NEW) – PAYLOAD: 7,500 KG – MILEAGE: 326,000 KM – BODY LENGTH: 8.00 M – BODY WIDTH: 2.49 M – BODY HEIGHT: 2.30 M – TIRE SIZE: 285/70 R19.5 – VERY GOOD TIRES EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500 / 2,000 A DEPOSIT OF AT LEAST 500.00 / 1,000.00 IS CHARGED FOR SALES TO EU AND NON-EU COUNTRIES. EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (AUTHORIZED EXPORTER). 5-DAY, 15-DAY, AND 30-DAY REGISTRATION PLATES, AS WELL AS 15-DAY AUSTRIAN REGISTRATION PLATES, ARE POSSIBLE. VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE.

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Bdsdpozpx Ucofx Ab Dsg Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening material Other accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), functionality: fully functional, 1 x Thread drilling machine WMW GI4/1 with coolant system Bdsdpfx Abozk I Als Dog The machine can be inspected while it is powered on.

Condition: used, Year of construction: 2012, functionality: fully functional, Tool holder: MK 2 Drilling capacity in steel: 23 mm Table: 380 x 390 mm Speeds: 150 - 1350 rpm Bdjdpfx Abszmm Avj Djg Throat: 220 mm with lead screws and nuts

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, pressure switch, pressure transmitter -Manufacturer: ifm, pressure sensor unused, original packaging -Type; PN5006 -P max: 20 bar -Protection class: IP 65 -Thread: G 1/4" -Operating voltage: 18...36 V DC -Quantity: 1 piece available -Cardboard dimensions: 125 x 85 x 45 mm Bsdpfxezmtxdj Ab Dsdg -Weight: 0.3 kg

Condition: used, Year of construction: 2011, Colour: White Bdedpozmvawsfx Ab Dsg Weight: 7.500 kg Price: On request - Year: 2011 - Documentation available: Yes - CE certificate present: No - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels