Used Waters Mass Spectrometer for sale (8,038)

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; tested and fully functional Lajdpfxjyigr Uo Anxeg

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. Laodpfsz Ai Tpsx Anxeg - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Ledpfx Anew Nrpboxeag Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Lodpfx Aney D A Ifexjag Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: - Container volume: 60 liters - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW Lodjz D Sr Ispfx Anxeag - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. - ERBA sieve vibrator YE 50: Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2015, machine/vehicle number: 14967, heating capacity: 1,650 kW (2,243.37 HP), temperature: 165 °C, tank capacity: 4,390 l, operating pressure: 18 bar, Equipment: documentation/manual, hot water, Hot water boiler operating on biomass. Lsdszb Iy Hjpfx Anxoag

Condition: repair required (used), Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a high-performance textile printing machine that offers outstanding print quality, high speed, and versatility. It is particularly suitable for textile printing companies that want to produce top-quality prints in large quantities (roll-to-roll) on a wide variety of fabrics. Up to now, it has primarily been used for printing cotton fabrics: jersey, French terry, cotton woven fabric, canvas, sweatshirt fabric, and viscose & modal qualities. It is being sold due to a business downsizing. The textile printing machine is currently still in operation and can be inspected at any time by appointment. We are still printing fabrics with it. However, the machine would need to be serviced – the slave PC is slow, and the color channels would need to be reworked. Ledpfxjvmdw Ij Anxeag The following items are included with the machine: dryer, unwinder, and rewinder. In other words, a complete production line. In addition, we will also include all remaining spare parts, inks, etc. IT IS BEST SUITED AS A SPARE PARTS STORE, IF PARTS ARE MISSING,... Technical data: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, Magenta, Yellow, Black, Red, Green, Gray Print heads: 64 x Spectra Polaris, recirculating – (7 color channels, 1 channel for pretreatment) Print width up to 180 cm Printing speed: Up to 200 m²/hour Printing modes: Several printing modes from 400-1200 dpi Recommended printing mode: 600 x 600 dpi in 6 passes using the staggered line printing method Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveying system Fabric feed system: Axial unwinding device with adjustable fabric width and tensioning mechanisms Max. media thickness: 15 mm Max. roll width 180 cm Max. roll outer diameter: 40 cm Max. roll weight: 50 kg Compressed air: 6-8 bar / < 0.4 m³/min IF THE MACHINE IS TO BE PUT BACK INTO PRODUCTION, IT WOULD BE RECOMMENDED TO HAVE THE MACHINE OVERHAULED AND REBUILT/SERVICED BY KORNIT – THE BUYER WILL BE RESPONSIBLE FOR THESE COSTS!

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines Lsdpfx Ajua Tbwjnxjag The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Lajdpfx Aozui T Henxeg Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Ljdpoy E H Eqjfx Anxjag Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG High-Resolution Continuum Source Atomic Absorption Spectrometer with PC, AAS ContrAA 700 Model: AASContrAA700 Condition: Used Technical Data: 230V AC 50/60Hz 2100VA General: Optical System Lsdpfx Anjzh Iqwjxsag Reflection optics with protective coating and optical system with light-tight encapsulation Monochromator Echelle grating double monochromator with F=380 mm focal length and variable intermediate slit; pre-monochromator with quartz prism. Wavelength selection via mirrored neon auxiliary lamp Wavelength range 185-900 nm Spectral bandwidth 2 pm at 200 nm Accessories: Documentation/Manual PC (Windows 7), Monitor, Mouse, Keyboard, Connection cables 5x IC standard tube 407-A81.011 3x Graphite pipetting inserts 407-A81.020 contrAA fuse set Grease for O-rings 2x Grommet 702-A81.233 1x Grommet 702-A81.234 1x Collection tray 407-110.499 4x Carrying handles

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts Laedpfeznz Ezjx Anxog • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2011, operating hours: 6,967 h, condition: used, functionality: fully functional, 1 York, Johnson Controls, water chiller, model: YLAA0390HE, 390 kW (335,400 frigories), R-410 gas, 5 scroll compressors, tubular heat exchanger, Dimensions: 3690 x 2242 x 2393 mm high, Weight: 2805 kg, with 6 axial fans. Lajdjwg Hnnjpfx Anxeg Equipment tested and guaranteed in Spain.

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: Ljdpfx Ajy E Hy Ujnxeag What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Lajdpfxozlc Edj Anxsg Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA If you have any further questions or require more information, please do not hesitate to send us a message or call us. Lasdpfjzlqb Tox Anxeg

Condition: used, Technical details: welding current - continuous: 320 A protection class: IP21 total power requirement: 17 kVA kVA weight of the machine approx.: 132 kg dimensions of machine: 1,3 x 0,6 x 0,9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switching from 2-stroke to 4-stroke Laedpfxsu Nwaxj Anxog Cooling mode AF New components like: -hose package 4.0 meter, water cooled -mass tongs and mass cable 4.0 meters -pressure reducer *

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Lasdpfx Aszzk Tbsnxog Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: good (used), System for the production of purified water / ultra-pure water including plans and instructions Lodpfop Eyvfjx Anxoag The Rocedis system can be loaded/unloaded. Inspection is possible by appointment at my warehouse in 06295 Eisleben.

Condition: used, Year of construction: 2025, This is an external, dual-chamber water softening system manufactured by Hobart, model Hydroline Protect SD-H, year of manufacture 2025. The system has undergone a fresh inspection in our in-house workshop and is fully functional. The list price is €2,395 net / €2,850.05 gross. Our price: used, year of manufacture 2025: €1,290 net / €1,535 gross. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Testing according to DGUV V3. Technical data: Dimensions: W x D x H: 360 x 360 x 585 mm Weight with/without packaging: 21/19 kg Maximum water hardness: 40°dH Salt tank capacity: 20 kg Salt consumption per regeneration: 0.5 kg Continuous flow rate: 2-20 L/min Temperature: min. 2 / max. 65°C Condition: used, inspected, fully functional. Customer benefits: Optimally protects all downstream machines from limescale - extends maintenance intervals and service life. Cost-effective, external water softening system. Compact dimensions, removable castors. No power connection required. The system is regenerated in parallel with the rinsing process. The water softening system provides softened water 24 hours a day. Basic model: A high-quality ion exchanger removes the limescale-forming minerals from the water and adds water-soluble sodium salt in an exchange process. The total hardness of the raw water is thereby reduced to 0°dH. The water softening system consists of a pressure-resistant and corrosion-resistant tank. Tank material: plastic. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Laodpfjzt Idnex Anxog The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), Hitachi X-MET8000 Optimum – Handheld XRF Spectrometer The device has only 119 measurements!!! For sale is a professional, portable Hitachi X-MET8000 Optimum (Oxford Instruments) X-ray fluorescence spectrometer from 2017, designed for fast and non-destructive analysis of elemental composition and identification of metal alloys. Device condition: very good. The spectrometer is offered in a comprehensive set, including a carrying case, two batteries, a charger/power supply, accessories, documentation, and certified reference material from MBH Analytical. The device is equipped with Alloy_FP and Alloy_LE_FP calibrations. The Optimum model uses an SDD detector and a 6-position filter system, and its analytical range covers elements from Mg to U. Key data: Manufacturer: Hitachi High-Tech / Oxford Instruments Model: X-MET8000 Optimum Year of manufacture: 2017 Technology: XRF – X-ray fluorescence Condition: very good Calibrations: Alloy_FP, Alloy_LE_FP Elemental range: Mg–U Weight: approx. 1.5 kg with battery. Laodpfx Aeztpu Ienxsg The device has 119 measurements!!!

Condition: used, Year of construction: 2014, functionality: fully functional, Water supply unit, Wilo Helix VE 1605 pump. 1 unit Wilo Helix VE 1605 vertical high-pressure centrifugal pump in inline design. Water capacity up to 30 m³/h, delivery pressure up to 86 m/water column (see attached performance curve). Motor 5.5 kW, 3 x 400 V. With electronic pump control with frequency converter for electronic speed regulation. 2 units in stock. Price per unit. Lodpfxjwvh N Eo Anxsag

Condition: like new (used), RoteX Defroster for Fish Blocks Designed to improve thawing yield while minimising drip loss, the RoteX Classic Defroster uses an immersion thawing process to help maintain product quality throughout defrosting. Compared with traditional air-thawing methods, the system offers improved yield, reduced product loss and more consistent thawing performance. The immersion process can provide yield improvements of up to 5%, helping to maximise the usable weight and value of the product. Lajdoz Dkgdjpfx Anxeg With 3 x water boilers

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Laedpfx Aerfclqjnxeg Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: excellent (used), Year of construction: 2023, operating hours: 2,000 h, functionality: fully functional, Equipment: compressor, documentation/manual, Available immediately due to change in business direction. A complete, fully operational beverage production system currently used for the commercial manufacture of premium kombucha. The plant is equally suitable for the production of soft drinks, functional beverages, botanical drinks, syrups, flavoured waters, iced teas and other non-carbonated beverages. Manufactured from food-grade 304 stainless steel and certified to UKCA, CE and TÜV SÜD standards. Located in Ireland. Plant Specification • 4 × 4,000L Jacketed Fermentation/Process Vessels • 2 × 2,000L Mixing/Kettle Vessels with Whirlpool Mixing • 4,000L Cold Water Tank • 4,000L Glycol Tank • Plate Heat Exchanger • Siemens PLC Control System • Complete Glycol Chilling System • Pumps and Pipework throughout • Stainless Steel Process Pipework • 2 × 200L CIP Units • Fully integrated valves and sanitary fittings • Temperature controlled throughout production. Metered Pump Capabilities Laodpfxozp Hkxe Anxsg Suitable for production of: • Kombucha • Functional beverages • Soft drinks • Flavoured waters • Botanical drinks • Tea beverages • Juice blends • Syrups • Beverage concentrates • RTD drinks The integrated whirlpool system allows efficient ingredient incorporation and mixing. Condition • Fully operational • Currently in production • Well maintained • Excellent condition • Available for inspection under power Certification • CE Certified • UKCA Certified • TÜV SÜD Certified • Food Grade 304 Stainless Steel Location Ireland Can assist with dismantling and loading. Price POA / Offers Invited Alternatively willing to discuss sale of complete turnkey beverage manufacturing facility. Photos and videos available upon request.