Used Weiler Condor Vs 2 for sale (78,861)

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4EG0 AC VSA motor SN:EL289439501003 with IVO G1356.Z encoder,used, normal signs of wear, 100% functional, scope of delivery as per photos Nsdpfevgpn Esx Afwoda

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Nodpfx Aeu H U S Hofwoda Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Siemens 1FT5032-0AC01-1 - Z AC-VSA motor SN:EDN61190701001, Z= G45: holding brake installed, G51: prepared for encoder system, unused with storage marks, 100% functional, scope of delivery as per photos Nodjuzrirepfx Afweda

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders Nedpfxevivmyj Afwsda >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: used, Year of construction: 1999, turning diameter 150 mm turning length 500 mm total power requirement 4 kW weight of the machine ca. 0,8 t Ndodpfxovm Dv Dj Afwea

Condition: ready for operation (used), Siemens 1FT5066-1AF71-4FG0 AC VSA motor without encoder SN:EJD90190802034 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ndsdpfx Afsu Sd D Njwea

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Ndsdpfx Asirmulefwea

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe made by Weiler, type Primus LZ-GS. The machine is in very good condition. Technical data: Year of manufacture: 1989 Machine no.: 4443 Operating voltage: 380 V Center height: 120 mm Distance between centers: 430 mm Spindle speed: 60 - 3000 rpm in 18 gear stages Spindle bore: 23 mm Short taper spindle head, DIN 55027 Ndsdpfxjihig Io Afwea Tailstock: MK 2 Feeds from 0.03 to 0.15 mm/rev Possible threads: Metric, inch, module, and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length: 1.2 m, height: 1.3 m, depth: 0.65 m Prices are plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling WE BUY/SELL PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Nedpfonkad Ssx Afwoda

Condition: excellent (used), Equalizer: shaft width 260mm length of table 900mm 3 knife shaft Planer: planing width 250mm dimensions of the table 250 x 600mm maximum planing height 130mm feed rate 8m/min Milling machine: spindle diameter 30mm max tool diameter 90mm Saw: cutting height 80mm blade diameter 250mm Ndedpfx Aotur Epjfwoa Drill: drill diameter 3-16mm table dimensions 210 x 360mm

Condition: good (used), Tailstock Taper size: MK 2 Quill travel: 30 mm Height-adjustable Center height of 250 - 285 mm Tiltable from -5 degrees to +15 degrees Njdpfsdlp Txex Afweda Base area: 230 x 155 mm Weight: 27 kg

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder Nodpohktq Aefx Afweda - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: used, Year of construction: 1969, Drill press, bench drill, column drill, pillar drill -Manufacturer: TOS, high-performance column drilling machine type 40 TF / C -Motor: MEZ 2.2 kW -Speeds: 56 - 2240 rpm -Table size: 400 x 315 mm, travel 600 mm -spindle taper: MK4 -Spindle stroke: 165 mm -Projection: 290 mm -Pillar Ø: 140 mm Ndjdpfx Ashck U Isfwja -Dimensions: 1200/650 / H1990 mm -Weight: 602 kg

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Nsdevrckqspfx Afweda Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: new, Year of construction: 2025, Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H Ndodpfjv Nl Rnox Afwea

Condition: ready for operation (used), Siemens 1FT5044-1AF71-3EB0 AC-VSA-Motor + Heidenhain ROD 426 2500 03S12-03 Encoder Id. 376 846-E8 SN:27752438B ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ndodpevbnlxsfx Afwea

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, total length: 1,240 mm, total width: 835 mm, Hello, I sell sheeted containers - metal 1/2 new - dimensions 1240 x 835 x 500 mm - weight of the container about 55 kg - payload 1000 kg Nedpfx Aoupumujfweda - new containers - price 115 eur/net/unit. - sale only against VAT invoice

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: Ndodpfoupwa Rjx Afwsa KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: ready for operation (used), Siemens 1FT5072-0AK01-9-Z AC-VSA motor SN: EF560336004001 - Z = K01: Vibration severity level according to ISO 2373, Z see nameplate, used, good condition, 100% functional, scope of delivery as per photos Nodpfx Afou Hu Rvjwsda

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AH0 AC-VSA motor SN: EF510026313019, used, good condition, 100% functional, scope of delivery as per photos Njdou Hu R Aepfx Afweda

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Nedpfx Afey Rx A Sowsda Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 13,049 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 36,400 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,300 mm, Diesel forklift Ndodpfxjy Sixaj Afwja Load center: 1200 mm Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 14.00-24 Rear tires type: Superelastic Rear tires size: 14.00-24 Description: In addition to this SMV model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing on favorable terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this SL20-1200A. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Side shifter, fork positioner, Heater, full cabin,

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Ndjdpfx Aey R Uuksfwja Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. Nsdpjzd Tycsfx Afweda About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), Here, we offer you a control unit. Control unit for the RIVSET riveting system. Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Nedpfozgaahox Afweda Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.