Used Wemas Vz 860 for sale (736)

Condition: ready for operation (used), Table size: 700 x 1500 mm Tabletop thickness: 500 mm Height above floor: 860 mm Cjdpfxozibthj Apbsrh

Condition: used, operating hours: 148 h, number of beds: 30, Operating hours: 148, initial registration: 02/02/2026. Initial registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Max. power 132/180 kW/hp (ISO 14396). Max. power with power management 155/210 kW/hp. Max. torque 750 Nm, with power management 860 Nm. Registered power 148 kW (ISO 14396). Max. power to the PTO 114/155 kW/hp (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. PowerCore engine air filter with coarse dirt extraction. EasyCare cooler package. 305 liter fuel tank. Cjdpfxjzpcu Ho Apbjrh

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Special price: only €35,700 gross! (Instead of the regular €38,675 gross – you save €2,975!) The KINGWAY VIP38 is a modern, powerful mini excavator specifically designed for construction, installation, and paving contractors. Equipped with the reliable KUBOTA engine, it offers high performance, low fuel consumption, and long service life. Its compact dimensions and 3,950 kg operating weight make the VIP38 suitable for both tight urban areas and large construction sites. A robust hydraulic system, impressive digging forces, and a wide working range make it an indispensable tool for a variety of earthmoving tasks. INCLUDED EQUIPMENT: - 3 buckets - Hydraulic quick coupler - Hydraulic thumb - Earth auger Model: KUBOTA D1703 Power: 18.5 kW / 25 HP at 2,200 rpm Type: In-line engine, water-cooled, 4-stroke, mechanical pump, naturally aspirated Max. torque: 97.4 Nm at 1,500 rpm Displacement: 1.647 l TRACK UNDERCARRIAGE: Max. travel speed: 4.4 / 2.4 km/h Track width: 300 mm Carrier rollers (per side): 1 Cjdpfxoyk Skhe Apberh Track rollers (per side): 4 OPERATING PARAMETERS: Bucket capacity: 0.12 m³ Platform swing speed: 9 rpm Gradeability: 58 % Ground pressure: 32 kPa Bucket breakout force: 30.4 kN Arm breakout force: 18.2 kN Hydraulic pressure: 22.5 MPa Operating weight: 3,950 kg Boom length: 2,535 mm Arm length: 1,400 mm Fuel tank: 42 l Hydraulic oil tank: 48.5 l Oil sump: 7 l DIMENSIONS: Overall dimensions (L × W × H): 4,915 × 1,720 × 2,525 mm Track length on ground: 1,670 mm Total track length: 2,154 mm Track gauge: 1,420 mm Minimum ground clearance: 295 mm Counterweight swing radius: 860 mm Front swing radius: 2,538 mm Blade height: 350 mm WORKING RANGE: Max. digging height: 4,800 mm Max. dumping height: 3,406 mm Max. digging depth: 3,208 mm Max. vertical digging depth: 2,957 mm Max. reach: 5,480 mm Max. reach at ground level: 5,359 mm Minimum swing radius: 2,530 mm Height at minimum swing radius: 3,655 mm Max. blade lifting height: 365 mm Max. blade digging depth: 385 mm Boom swing angle (left/right): 55° / 65° PRICE: €32,500 net €38,675 gross

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), Equipment: 4 in one shovel, pallet forks, This advertisement is for informational purposes only and does not constitute a legally binding offer. Crodszwl Thepfx Apboh KINGWAY FARMER 906T – Telescopic Wheel Loader TECHNICAL DATA Model: FARMER 906T Bucket volume: 0.3 m³ Rated load capacity: 600 kg Maximum load capacity: 700 kg Total weight: 1,650 kg Lifting height: 2,550 mm Dump height: 1,850 mm Engine: PERKINS Engine power: 18.4 kW / 24.5 hp Rated speed: 2,600 rpm Track width: 860 mm Wheelbase: 1,340 mm Dimensions: 3,725 × 1,150 × 2,360 mm Standard tires: 26×12.00-16 Maximum speed: 10 km/h WARRANTY AND SERVICE 12 months warranty, with the option to extend it up to 3 years Own mobile customer service Spare parts supply Professional workshop and repair service DELIVERY SCOPE KINGWAY FARMER 906 wheel loader with 4-in-1 bucket Pallet forks 1 year mobile warranty, with the option to extend it up to 3 years Operating manual Original invoice with VAT shown PRICE: €16,900 net €20,111 gross KINGWAY Deutschland e. K. Untergambach 10 84098 Hohenthann

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available on request. - Leading axle, electro-hydraulically steered - Rear air suspension, tridem, 2 driven axles - Globetrotter XL safety cab (FH) - Wheelbase: 3,900 mm - Euro 6 emissions standard, with SCR, particulate filter, and exhaust gas recirculation - Diesel engine 12.8 l, 551 hp / 405 kW, 2,652 Nm - Engine brake exhaust pressure regulator (incl. engine control for I-Shift) - I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm - Two additional crawler gears, slow & ultra-slow - Two additional reverse crawler gears - Liftable axle - Drive axle RTH2610B, tandem axle hub reduction, 4 planetary gears - Longitudinal and cross differential locks - Drive axle ratio 3.46 : 1 - Automatic climate control with sun sensor, fog sensor, air quality sensor, and activated carbon filter - Front axle air suspension - Rear air suspension - AdBlue tank, usable volume 90 liters, height 710 mm - Front axle tires 385/55R22.5 - Rear axle tires 315/70R22.5 - Rear-lift axle tires 385/55R22.5 - Transmission/I-Shift control via unit at driver's seat - I-Shift drive modes: Standard, Performance, and Economy - PTO PTER-DIN, engine mounted, prepared for pump according to DIN 5462 - Electronic Stability Program (ESP) - Radio: AM/FM and DAB/DAB+ (analog & digital) - Reversing surveillance/camera - Second driver information display, 9-inch color touch display - Robust leather trim: leather seat (beige/raven) with matching grey vinyl interior - Comfort driver's seat, air-suspended, heated, seat belt integrated in seat, Millennium Silver metallic - LED main headlights with adaptive high beam - LED daytime running lights, V-shaped LED fog lights, front Codpeyhkqhsfx Apbjrh - Heavy-duty fifth wheel Jost JSK 38-C, king pin 3.5 inch (90 mm) - 1. Custom feature: I PARK COOL stationary air conditioning - 2. Custom feature: Ride height control switch in cab - 3. Custom feature: Reinforced spring actuators - 4. Custom feature: PCA 20025 custom fuel tank 860 L behind cab - 5. Custom feature: AA ratio 3.33, CAPQ-25000817-01 - Conversion kit for 2 inch king pin - heavy haulage with GCW greater than 100 tonnes - additional side with vertical exhaust for EASP1/EASP5 - CB radio next to TCO with hands-free system, Stabo/Albrecht - Compressed air gun mounted on left of driver's seat - Jumbo - Globetrotter roof sign lighting - 7-liter water tank in side storage compartment - NATO socket on bar above switch - Lightfix bar with 4 LED headlights, including 2 x rotating beacons

Condition: excellent (used), Year of construction: 2006, _M 46_ _Engel VC 1050/220 HL_ Clamping force: 220 t Year of manufacture: 2006 Control system: CC 200 Screw diameter: 55 mm Screw type: POM Min. mold height: 300 mm Max. opening stroke: 750 mm Max. platen distance: 1,050 mm Ejector stroke: 180 mm Crjdpozu R H Usfx Apbeh Tie-bar spacing (H × V): 860 × 830 mm Platen size: 560 × 600 mm Quick clamp: Yes Core pull: 2× Needle shut-off: 2×

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required Crodpfxeziizyj Apbjh 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, operating pressure: 500 bar, total length: 860 mm, high-pressure hose length: 10,000 mm, total height: 1,100 mm, total width: 600 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 150 kg, input voltage: 400 V, fuel: electricity, overall weight: 150 kg, warranty duration: 12 months, power: 15 kW (20.39 HP), input current: 63 A, Equipment: chassis, Designed for professional use in industry, the CLENA H series is available in a variety of pressure and flow combinations, up to 500 bar and 21 l/min. This allows for precise adaptation to every customer requirement. These machines are designed for continuous operation in demanding cleaning tasks where no compromises can be made. Includes accessories: - 10 m high-pressure hose DN10, with kink protection on both sides - HP500 Soft CL high-pressure gun with swivel joint at the inlet - CL spray lance with nozzle protection, including high-pressure nozzle Dimensions: 860 x 600 x 1100 Weight: 150 Available models: H9318 | 350 bar | 18 l/min | 11.0 kW H9330 | 200 bar | 30 l/min | 11.0 kW H9335 | 170 bar | 35 l/min | 11.0 kW H9340 | 150 bar | 40 l/min | 11.0 kW H9415 | 500 bar | 15 l/min | 15.0 kW H9418 | 400 bar | 18 l/min | 15.0 kW Crsdpfx Apjzd Tuyebsh H9421 | 350 bar | 21 l/min | 15.0 kW H9425 | 300 bar | 25 l/min | 15.0 kW H9430 | 250 bar | 30 l/min | 15.0 kW H9435 | 225 bar | 35 l/min | 15.0 kW H9440 | 200 bar | 40 l/min | 15.0 kW H9450 | 170 bar | 50 l/min | 15.0 kW H9521 | 500 bar | 21 l/min | 18.5 kW H9560 | 170 bar | 60 l/min | 18.5 kW Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Credpfx Ajzfilwjpbsh Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), functionality: fully functional, power: 37 kW (50.31 HP), Year of construction: 2019, pressure (max.): 13 bar, usable tank capacity: 1,500 l, rotational speed (max.): 3,800 rpm, volume flow: 475.2 m³/h, machine/vehicle number: API866497, The compressor received a comprehensive service in December 2025, including an oil and filter change! TECHNICAL DETAILS Cut-in pressure: 8.5 bar Cut-out pressure: 10.0 bar Operating temperature: 76 °C Volume flow: 131.9 l/s Volume of pressure vessel: 1,500 l Manufacturer of pressure vessel: OKS Otto Klein GmbH MACHINE DETAILS Engine power: 37 kW Engine speed: 3,800 rpm Operating hours (as of 12/2025): 31,006 h Machine weight: 860 kg The following work was carried out during the service in December 2025: Oil change Air filter cartridge replaced Oil filter replaced Oil separator cartridge replaced Emergency stop switch checked Safety valve checked Test run performed Oil level checked Oil leaks checked Cedpfx Aezf Afqopbsrh Air leaks checked Belt tension checked Drive coupling checked

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Credjzvgi Ijpfx Apbjh Device weight: 860 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Credpozuxkhjfx Apboh Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: used, axle configuration: 3 axles, first registration: 03/1992, suspension: other, tire size: 275/70 R 17.5, wheelbase: 10,240 mm, Year of construction: 1992, = Additional options and accessories = - Hydraulic suspension Crodpfozvcxxex Apbeh = Additional information = Axle configuration Tire size: 275/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Rear axle 1: Dual tires; Steerable; Tire tread depth left inside: 60%; Tire tread depth left outside: 60%; Tire tread depth right inside: 60%; Tire tread depth right outside: 60%; Suspension: hydraulic suspension Rear axle 2: Dual tires; Steerable; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70%; Suspension: hydraulic suspension Rear axle 3: Dual tires; Steerable; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: Air suspension Weights Unladen weight: 12,220 kg Payload: 35,780 kg GVW: 48,000 kg Functional Loading platform height: 140 cm Condition Damage: None Identification License plate: OB-90-VZ

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), Equipment: 4 in one shovel, pallet forks, This advertisement is for informational purposes only and does not constitute a legally binding offer. KINGWAY FARMER 906 – Wheel Loader TECHNICAL DATA Model: FARMER 906 Bucket volume: 0.3 m³ Rated load capacity: 600 kg Maximum load capacity: 600 kg Total weight: 1,470 kg Lift height: 2,550 mm Credpfxjzwl Nio Apboh Dumping height: 1,850 mm Engine: PERKINS (EURO 5) Engine power: 18.4 kW / 24.5 hp Rated speed: 2,600 rpm Track width: 860 mm Wheelbase: 1,340 mm Dimensions: 3,325 × 1,155 × 2,360 mm Standard tires: 27×8.5-15TL Maximum speed: 18 km/h WARRANTY AND SERVICE 12-month warranty with the option to extend it up to 3 years Dedicated mobile service team Spare parts supply Professional workshop and repair service DELIVERY SCOPE KINGWAY FARMER 906 wheel loader with 4-in-1 bucket Pallet fork 1-year mobile warranty with the option to extend it up to 3 years Operating manual Original invoice with VAT shown PRICE: €15,546.22 net €18,500 gross KINGWAY Deutschland e. K. Untergambach 10 84098 Hohenthann

Condition: excellent (used), power: 55 kW (74.78 HP), color: other, lifting height: 13,000 mm, mast type: telescopic, Year of construction: 2016, operating hours: 2,484 h, General information Year of manufacture: 2016 Technical information Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Condition Cedjy Rfwcjpfx Apberh Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IIIB / Tier IV interim pallet forks, hydraulic quick coupler, CE certificate

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm Credpfxsw H Rq Hj Apboh - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), Year of construction: 2021, operating hours: 4,600 h, functionality: fully functional, turning length: 640 mm, turning diameter: 460 mm, spindle bore: 66 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 640 mm, spindle motor power: 22 W, Main spindle C-axis continuous on both spindles 12-position turret Powered tools, 12,000 rpm Electronic handwheel Bar feeder interface Crsdpfezzbxhex Apbsh Chuck on both spindles, Ø210 mm Tool presetter Chip conveyor Tool life management High-pressure pump, 35 bar Chip collector Set of tool holders

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,286 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Hakomatic B45 TB510 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) Year of manufacture: 2011; operating hours: 1,286 510 mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger for convenient daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures powerful water pickup from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown Crodpezzmc Sjfx Apbjh TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE

Condition: good (used), Year of construction: 2003, Opportunity to buy a 3 axis vertical machining center in good condition. Mainly used process plastic, so it has not suffered heavy machining and only 7434 spindle hours. Optional: ca 30 BT-40 holders, including drill chuck holders, Weldon holders and collet chucks. Crsdpjzzz Ebefx Apboh This machine is immediately available for delivery. Travel distance X-axis 1500 mm Travel distance Y-axis 300 mm Travel distance Z-axis 350 mm CNC Control HEIDENHAIN TNC 410 Total height 2300 mm Total width 3250 mm Overall weight 3200 kg Spindle speed (max.) 8000 rpm Product length (max.) 2900 mm Number of axes 3 Toolholder BT40 Clamp surface height above machine table 860 mm Max tool diameter 80 mm Max tool length 200 mm Max tool weight 3 kg Internal cooling Air cooling through the spindle Capacity tool magazine 19 positions Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A Crodpjhhfz Nefx Apboh -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg

Condition: used, mileage: 94,800 km, power: 115 kW (156.36 HP), first registration: 03/2019, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,356 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, * ATEGO 816 Tipper, 2-way, with ZAA-towing hitch + ball-type coupling * HIAB Rear Crane X-DUO 078 BS-2 * 5th and 6th hydraulic circuit for grab control * Outreach: 7.30 m + Lifting capacity: 860 kg RETROFITTING to RADIO REMOTE CONTROL available (additional net cost €6,600 +) * Vehicle number for customer inquiries: 4 * Crane * Engine spec Euro VI, with OBD-C * Active Brake Assist * Air conditioning * Center seat with 3-point safety belt * Manual transmission * Lane Keeping Assist * Environmental sticker (green) * G 135 towing hitch for ZAA * Ringfeder towing hitch * Stability Control Assist (ESP) * Two-line trailer brake system * Electronic brake system with ABS and ASR * Driver comfort air-suspension seat * Electric windows, both sides * Transmission G 71-6/9.20-1.0 * NA MB 60-2c, MPA low, N-speed * Single PTO (Power Take Off) * Particulate filter * Digital tachograph, EU, with rev counter * Cruise control * 25-litre AdBlue tank * 12V trailer socket, 13-pin, frame-fixed, LED * 24V trailer socket, 15-pin * Tipper / tipper semi-trailer body * Roof hatch/roof ventilator * Weight variant 8.6 t (3.8/5.7) * Main mirror, electric, driver’s side * Heater, electronic air supply unit * Rear parabolic suspension, 5.7 t * Plastic tank 120 l, left-hand side * Meiller pump, 7-piston, type 270/45 * Engine OM934, R4, 5.1 l, 115 kW (156 HP), 650 Nm * Wheelbase 3620 mm * S-cab ClassicSpace, 2.30 m, tunnel * Front parabolic suspension, 4.0 t * Pre-equipped for toll collection * Full service history * Three-seater cab * Cross-member, post-installation for towing hitch AHK G135 ZAA * Tyres tubeless, 235/75 R 17.5 front axle No liability for printing or typing errors Sales only to commercial customers Subject to errors and prior sale. Changes, prior sale, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty in the legal sense. The description in the sales contract is binding. * TOP SERVICE + QUALITY * We can provide you with a LEASING-FINANCE-HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV LBW / tachograph verification and OBU installation can be carried out on-site by our partners * 30-day export licence plates Crsdpjw E T R Tjfx Apbeh All export documents can be provided upon request * TOLL for Toll-Collect can be booked in house * Free transfer from Stuttgart Airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles permanently in stock

Condition: new, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL TB510 PROFESSIONAL FLOOR SCRUBBERS - 2300m²/h TECHNICAL DATA: Model: Scrubmaster B45 CL TB510 Manufacturer: Hako Type: Compact scrubber Country of manufacture: Germany Series: Professional Condition: NEW Wheel drive: Yes Battery charger: Built-in Power supply: Battery Battery type: Sonnenschein GF12105 V (12V 105Ah) Water tank type: AntiBac Number of brushes in the set (pcs): 1 Brush working width (mm): 510 Squeegee working width (mm): 860 Water tank: clean / dirty (l): 42 / 42 Theoretical surface area performance (m²/h): 2300 Weight ready to use (kg): 230 WHY CHOOSE THE HAKO SCRUBMASTER B45 CL TB510 SCRUBBERS The AntiBac tank used in Hako machines is made of a material with antibacterial properties. This reduces the growth of bacteria and fungi inside, improving the hygiene of the machine and reducing unpleasant odors. This solution is particularly useful in areas with high sanitation requirements, such as hospitals and food processing plants, and also helps maintain the tank in better condition for longer. Maneuverable, quiet, and easy to use. The B45 CL scrubber is equipped with a 510mm disc brush head. The device is ideal for cleaning small and medium-sized rooms where easy maneuverability is essential. The intuitive control panel ensures easy operation and a quick learning curve for basic functions. The scrubber features an arched squeegee that efficiently removes water and leaves surfaces perfectly clean and dry. The device is made of high-quality materials, resistant to impacts and chemicals. Like all HAKO products, the B45 CL TB510 is proven in industrial applications, and the availability of parts and service guarantees a long service life. Csdpfxey Amwue Apbjrh HAKO SCRUBMASTER B45 CL TB510 EQUIPMENT ANTIBACTERIAL TANK 510mm medium-hard disc brush, 860mm arched squeegee, Oil-resistant squeegee rubbers, 2x 12V 105Ah Sonnenschein batteries Built-in charger Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning of any surface. - The scrubber is equipped with a 51 cm diameter brush and a 42-liter tank, perfectly combining compactness with the ability to clean larger surfaces. - Thanks to the powerful brush pressure and effective water extraction system, the device leaves floors clean and dry in just one pass. Designed for everyday, intensive use. - The Scrubmaster B45 CL is a robust, durable, and reliable device, designed for long life and professional use.

Condition: new, functionality: fully functional, Year of construction: 2025, Sorting and Demolition Grapple NEW!! HEUSS GSR16-800 16tn excavator Heuss Sorting & Demolition Grapple For max 16tn Excavator Mount of your choosing included (CW030, MS10, S-link etc) Intergrated slewring- 2 hidromotors rotator. Hardox 400 buckets, weldox frame. Hardened bolts Cr/Mdn 4 Clamping 350 bar max oilpress Crsdpew Hf Ugefx Apbjh Rotating 190 bar max oilpress Weight 860 kg Opening 1800mm Breedte 800mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Crsdpfx Apozx N Thebeh Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm Codpfexaaghjx Apborh work height max. 860 mm 575 mm Control GP 37W2 13 - 33 Number of working hours ca. 15.800 h 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms