Used Yanigav Tam 245 for sale (1,256)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R Bwodpfx Ahextf Dfovsp 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 10,000 rpm, Vices are not included in the scope of delivery! Bwedpfx Aexb Dyhjhvjp

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Bsdpfxoykuh No Ahvewp 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible Bwodpoykud Rsfx Ahvep TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Bjdpfx Ahoykuhcovewp Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. Bsdpfex Ta Nxox Ahvswp MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Bwodpfxoyktrts Ahvjp Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable Bwsdpfx Aeykub Ajhvsp F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min Bwedpfx Ahjykuhpevjp F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Bwsdjx Trg Aopfx Ahvep

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders Bwedpfev Nhyfox Ahvsp - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Condition: ready for operation (used), Year of construction: 1998, operating hours: 15,968 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller model: FANUC 16iM-16i, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 300 mm Max. spindle speed: 8,000 rpm Table surface dimensions: 650 x 380 mm Number of tool magazine slots: 14 Tool holder: ISO/BT 30 Rapid traverse: 48 m/min MACHINE DETAILS Bodpfxjyvf Hge Ahvowp Control model: FANUC 16iM-16i Power-on hours: 94,768 h Cutting hours: 15,968 h Operating hours: 5,146 h Spindle power: 5.5 kW EQUIPMENT Chip container Coolant tank with pump Integrated liquid lubrication system

Condition: good (used), Pad printing machine TampoPrint rapid 2000/90 Manufacturer: TampoPrint AG Model: rapid 2000/90 Machine type: Pad printing machine Series: rapid 2000 Bodpfx Aeytp Trohvswp Country of manufacture: Germany Control: integrated electronic machine control Control panel: digital control panel with display Emergency stop switch: present CE marking: present Location: Freiburg

Condition: used, Year of construction: 2018, Manufacturer: Tama Aernova ATEX model: Kompac Air - Atex Zona 22 Year: 2018 Type: Cartridge filter Atex: Ex II 3 D Ex h IIC T200°C Dc Cleaning system: compressed air Bwsdpfx Ahox R D Igovep Turbo SRL pressure tank - Max pressure: 8 bar - Capacity: 22.7 L Motor power: 3 kW - 3000 rpm CORAL extraction fan unit: Model PRVM450 (ATEX) Year: 2018 Power: 3 kW Capacity: 1776 m3/h Speed: 3000 rpm   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: used, Year of construction: 2002, FRISTAM PUMP FM 252 C STAINLESS STEELMulti-stage centrifugal pump 30 m3/hHMT 70msuction diameter: 65 discharge diameter: 50Year 2002Engine 15 KW – 2900 rpm – 400/690v IP55Deported terminal block Mechanical seal Bsdpfx Aex Rz S Ashvswp

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Bjdpfx Ajw Hhwwshvjwp Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) Bedpfsh T Dvtjx Ahvowp KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 06/06/2026! TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm MACHINE DETAILS Control: Fanuc 15 M Rotary axis: Fibro NC1 Bwjdey Rl Alspfx Ahvep

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Bwodpsywd Aksfx Ahvsp Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis Bjdpfxexnwkge Ahvswp MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Bjdswyli Repfx Ahvewp Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Frequency: 50 Hz Rated current: 87 A Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Condition: excellent (used), Year of construction: 2017, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device was used for housing surface testing as the type describes and is in good to very good condition Year of manufacture: 2017 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale Bodpfx Asmfty Hshvowp PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2000, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device is in very good condition and ready for immediate use with many additional attachments Year of manufacture: 2000 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading and/or shipping possible for an additional charge Bsdpfx Ahjvkxa Esvewp Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, torque: 95 Nm, controller model: ARUMATIK, Sparkchanger 3020 15 K – Technical Data and Condition Travel Distances and Dimensions X-axis travel: 762 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Distance from table to spindle: 100 mm to 610 mm Spindle and Tools Spindle speed: 15,000 rpm Tool magazine type: BT40 Number of tool positions: 30 Max. tool length: 300 mm Max. tool diameter: 150 mm Feed and Rapid Traverse Rapid traverse X & Y axes: 50 m/min Rapid traverse Z axis: 36 m/min Feed rate: 36 m/min Pallet Changer and Table Pallet changer table size: 500 x 860 mm Max. table load: 500 kg Additional Equipment Cooling system: IKZ (internal coolant supply) Chip conveyor: combination type (scraper belt and hinged belt) Probe: Renishaw probe OMP 60 Tool measurement: Renishaw OTS (tool length & diameter measurement as well as breakage monitoring) Safety: Kraft & Bauer fire suppression system Bsdjyuua Tepfx Ahvewp Operating medium: Can be operated with oil Operating Information and Condition Operating hours: 3,500 automatic hours Previous application: Exclusively used for aluminium components and oil cooling Machine condition: Very good

Year of construction: 1998, condition: excellent (used), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy class: Grade 2 Flatness: 16.6 µm Weight: 250 kg Bsdpfolxyqcsx Ahvowp Linear feed unit Waveline 60 Basic Probing range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeat accuracy: < 10 µm Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Completely enclosed housing with electrically operated shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable for Waveline  Installation kit for roughness measurement  Probes and holders for roughness measurement  Machine table  Emergency stop button on the machine table  Maintenance unit for compressed air preparation  Air damping elements for hard stone plate support  Documentation