Used 80 Ccm for sale (16,767)

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW table: schwenkbar Dust suction hood 100 mm Crjdpfxjwffpbo Aa Hsc

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Csdpfx Aajy Hkd Hs Hsrc Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2009, operating hours: 670 h, 2009 | Bomag BW 80 AD 2 | Used Tandem Roller | 670 hours 📍Location: Austria 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points 34 approved ✅ 1 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Engine works but needs attention, eater spray partly removed, vibration button fixed and works 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40012 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Crjdpfxeyhpr Rj Aa Hec ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 490,500 km, power: 162 kW (220.26 HP), first registration: 07/2016, fuel type: diesel, empty load weight: 5,440 kg, maximum load weight: 2,050 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 35 m³, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, truck registration, Iveco EuroCargo 80-220 4x2, flatbed/tarpaulin body First registration: 7/2016 490,500 km with documentation 6-cylinder engine, 220 hp / 6728cc displacement Euro 6 emission class Long-distance driver's cab Automatic transmission Adaptive cruise control Credjy S D R Rspfx Aa Hoc Lane keeping assist Air conditioning Air suspension, rear axle Wheelbase 4800mm Trailer coupling Tires 225/75 R17.5, tread depth approx. 60% Tarpaulin body dimensions: L: 6200mm x W: 2480mm x H: 2300mm Unladen weight 5,440 kg The vehicle is in good condition. Valid TÜV (technical inspection) until March 2027. Net/export price: 15,900 Euros All information is without guarantee, errors and omissions excepted.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 9 cup wheels vertical bevelling machine + 2 peripheral wheels for the edge + 1 cup wheel for the arris Crjdpfxsyw Hkwo Aa Hec min. size : 40 x 40 mm speed : 0,5 - 4,1 m/min. glass thikness : 3 - 25 mm bevel angle : 3° - 45° max. bevel width : 60 mm power : 26 kw machine sizes : L x W x H (m) = 8,4 x 1,7 x 2,3 weight : 5300 kg

Condition: used, mileage: 149,171 km, power: 316 kW (429.64 HP), first registration: 01/2019, fuel type: diesel, overall weight: 35,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 06/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, Internal vehicle number: G400135 German vehicle On its way to our yard in Kaufungen - Kassel, immediately available More INFO via Luis Lucena Mercedes-Benz AROCS 3543 8x4 Euro 6 CIFA MK25 1,032 operating hours Year of manufacture: 2018 CIFA MK25H-80-RH-PB607EPC Very good condition! Financing Example: * Internal number: G400135 * Purchase price: €144,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €2,250.02 * Final residual value: €26,380.00 If this offer suits you or you would like it tailored to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and changes excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. Codpfx Aaey Dyxus Hjrc GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,615 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 81 kW (110.13 HP), fork carriage width: 2,200 mm, fork length: 1,200 mm, empty load weight: 12,169 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,200 mm, Diesel Forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Crodpfx Aaey Hm Dcj Hjc Mast type: Triplex Transmission: Torque converter Condition: New machine Technical condition: New Front tire type: Superelastic Rear tire type: Superelastic Description: - 2.9-liter HMC D4CC diesel engine, 81 kW, EU Stage V - Common Rail incl. DOC, SCR, and DPF - Kessler front axle - ZF transmission - Engine power selector - Reduced noise level in the cabin - Multifunctional digital display - Air conditioning with multiple air vents - Improved visibility thanks to one-piece curved windshield - Automatic parking brake: OPSS system - Speed limiter - Slope indicator - Easy maintenance access - Tiltable cabin with heating and A/C - Engine self-diagnosis and consumables management - Automatic particulate filter and SCR regeneration - Grammer seat with belt, contact switch, and armrest 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, particulate filter, full cabin, air conditioning, full free lift, CE certificate, twin tires, interior mirror, exterior mirrors, windshield wiper, single pedal, LED, seat,

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Csdpfxjy N D E Aj Aa Hjrc Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2015, The Sahinler HPK 80 profile bending machine is a heavy-duty hydraulic section bender with 3 driven rolls for precise bending of steel profiles, tubes, and box sections. The machine is suitable for industrial use in steel construction and mechanical engineering, offering a robust build with high bending capacity and reliable repeat accuracy. Codpfoy Rrh Isx Aa Hjrc

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm Codper D N Eqsfx Aa Hjrc output: 10 - 250/min

Condition: excellent (used), Year of construction: 2025, Horizontal thin-cut band saw 400 mm working width New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Crodpfx Aasy Dpn Eo Hjc Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: used, axle configuration: > 3 axles, first registration: 05/2009, total length: 13,220 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 6,830 mm, color: blue, Year of construction: 2009, Equipment: ABS, Total length: 1,322 cm Extendable: 700 cm Total bed length: 16,300 cm Width: 255 cm Loading height (loaded): 80 cm = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire size: 205/65R17.5; twin tires; steering axle; left inside tread: 60%; left outside tread: 60%; right inside tread: 60%; right outside tread: 60% Rear axle 2: Tire size: 205/65R17.5; twin tires; steering axle; left inside tread: 60%; left outside tread: 60%; right inside tread: 60%; right outside tread: 60% Rear axle 3: Tire size: 205/65R17.5; twin tires; steering axle; left inside tread: 40%; left outside tread: 40%; right inside tread: 40%; right outside tread: 40% Rear axle 4: twin tires; steering axle; left inside tread: 40%; left outside tread: 40%; right inside tread: 40%; right outside tread: 20% Weights Unladen weight: 13,750 kg Payload: 35,850 kg Gross vehicle weight (GVW): 49,600 kg Crodpjy Nxwasfx Aa Hsc Identification Type number: STZ-L4-34/80 A / 4 x STEERING AX = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We make every effort to ensure information is correct, but no rights can be derived from the texts provided.

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Crsdpfx Aasqgcqio Hec Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Weight: approx 6300 KG

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, total length: 16,470 mm, total width: 2,750 mm, total height: 1,250 mm, suspension: air, tire size: 235/75 R17.5, color: grey, Year of construction: 2003, Colour: Grey Payload weight: 32,540 kg Details: Manufacturer: Goldhofer Csdpfx Aoyrzbloa Hsrc Type: STZ-L4-33/80 Chassis number: WG0STZL4530027413 Year: 2003 Weights: King-Pin load: 17,500 kg Axle load: 10,000 kg Total axle load: 40,000 kg GVW: 57,500 kg Empty weight: 24,960 kg Loading capacity: 32,540 kg Axles: Brand axles: Gigant Air suspension All axles hydraulic steering High/low valve ABS Tyres: 235 / 75 R17.5 Double fitted Load index 143/141j Measurements: Length: 16,470 mm Extensions: 8,740 mm + 8,635 mm + 8,535 mm Max extended length: 42,380 mm Loading floor width: 2,750 mm Loading floor height: 1,025 mm (+100 / – 165 mm) King-Pin height: +/- 1,250 mm Additional information: NATO plug Lashing rings Stake pockets Hydraulically operated gooseneck Wooden loading floor Mechanical landing gear Toolbox Electro-hydraulic pump for trailer functions Spare wheel holder King-pin 3.5” Central greasing with 2 pumps Radio remote control = Further Information = General Information Year of construction: 2003 Axle configuration Tyre size: 235/75 R17.5 Axle brand: Gigant Suspension: Air suspension Rear axle 1: Double tyres; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Double tyres; Max. axle load: 10,000 kg; Steered Rear axle 3: Double tyres; Max. axle load: 10,000 kg; Steered Rear axle 4: Double tyres; Max. axle load: 10,000 kg; Steered Weights Empty weight: 24,960 kg Payload: 32,540 kg GVW: 57,500 kg Functional Loading floor height: 102 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request

Condition: good (used), We offer you: 6 pallets for DMC 80 U Price per pallet Codpfxeyvqfve Aa Horc Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information. Subject to change and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2005, operating hours: 5,316 h, Equipment: all wheel drive, Equipment: * 5,316 operating hours * Engine power: 53.5 kW * 20 km/h * Hydraulic connections * Additional headlights * Rotating beacon * Quick coupler Other: * 1 previous owner * Originally delivered in Germany * Year of manufacture: 2005 * Service weight: 5,975 kg * Total weight: 6,500 kg * Brakes have an error message Since 1972, we have been your reliable partner for all things related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. Csdpfx Asx Rfbzoa Hjrc The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale excepted.

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Spindle hours: 14,000 h 3-axis machining Coolant filtration system Pendulum operation, mountable partition available Heidenhain 530 ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm Codsy Rmv Hjpfx Aa Herc

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm table surface area 1250 x 700 mm NC-rotary table integriert, 700 mmø spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min control HEIDENHAIN control TNC 430 feeds x/y/z -stepless 20 - 15.000 mm/min rapid traverse 30 m/min ATC 32 (2 x 16) Pos tool diameter 80 / 130 mm workpiece length 315 mm weight of tools max. 8 kg NC-rotary table - speed - max. 15 U/min table load 600 / 500 kg milling head -swivable +/- 12 / 90 ° total power requirement 60 kW weight of the machine ca. 9,6 t dimensions of machine L x W x H 4,53 x 2,60 x 2,50 m = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant Crjdpfxotqqmbo Aa Hoc

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical data: Credswka Hfjpfx Aa Hoc - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Condition: good (used), Used press brake by Donewell / Safan Credpfx Aaoy A Ey Io Hec Model 80 3100 Capacity 3100 x 80 tons 1 set of tooling

Condition: used, Year of construction: 2015, operating hours: 1,300 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-80 diesel forklift, year of manufacture: 2015, hours: 1,300h!, previous owner: German Armed Forces, rated lifting capacity: 8,000 kg, lifting height: 4,700 mm, duplex mast, hydraulic sideshift, fork positioner, full cab, fork length 2,400 mm, diesel engine: [80 kW / 109 hp], weight: 13,600 kg, in good condition, ready for immediate use! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Power steering, cab Cedpfxoy T Uv Tj Aa Hjrc = Further information = Lifting capacity: 8,000 kg Overall height: 280 cm Please contact Tobias Ebert for more information.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 17,840 mm, loading space width: 1,750 mm, tire size: 9.50R17,5, wheelbase: 1,350 mm, color: blue, Year of construction: 1992, Color: blue Load capacity: 43,600 kg Extendable Manufacturer: Goldhofer Type: STZ-VL4-44-80 Extendable Low Loader Chassis number: WG0STZV47N0020238 Year of manufacture: 1992 Weights: King-pin load: 24,000 kg Axle load: 10,000 kg Total axle load: 40,000 kg GVW: 64,000 kg Empty weight: 20,400 kg Loading capacity: 43,600 kg Axles: Axle brand: BPW Air suspension All axles with hydraulic steering High/low valve ABS brake system Tires: 9.50R17.5, double mounted Load index 143/141 J Dimensions: Length: 17,840 mm Extension: 4,000 mm Maximum extended length: 21,840 mm Loading area length: 8,000 mm - 12,000 mm Loading area width: 2,750 mm Height: 600 (+/-100) mm King-pin height: 1,300 mm Additional Information: Truck hydraulic connection for hydraulic functions Lashing rings 2x spare wheel Detachable gooseneck Hydraulically operated gooseneck Working lights Rear bumper with lights King-pin 3.5” Schübler lubrication system Outriggers for widening the loading area Fixed ramps on the loading area High/low valve = Further Information = General Information Year of manufacture: 1992 Axle configuration Tire size: 9.50R17.5 Axle brand: BPW Rear axle 1: Double tires; Max. axle load: 10,000 kg; Steerable Rear axle 2: Double tires; Max. axle load: 10,000 kg; Steerable Rear axle 3: Double tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Double tires; Max. axle load: 10,000 kg; Steerable Weights Empty weight: 20,400 kg Load capacity: 43,600 kg GVW: 64,000 kg Functional Extendable structure: Yes Credpfx Aajuu Hbhs Hec Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: Upon request

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, total width: 720 mm, total length: 1,050 mm, total height: 1,660 mm, empty load weight: 450 kg, power: 4.4 kW (5.98 HP), height adjustment type: electric, New machine with a 24-month warranty. Advantages: + Excellent price-performance ratio + Powerful planetary mixer with digital control + 10 speeds with constant power transmission + Includes ingredient hopper and safety grille made of stainless steel + The machine switches off immediately when the grille is lifted + With integrated dust/splash guard cover + The machine stands on 4 vibration-absorbing adjustable feet + No floor anchoring required + Hydraulic bowl lift with two safety switches + Bowl support arms made of stainless steel + Closed planetary gearbox made of stainless steel + Can also be optionally used with a 60-liter attachment + Fast spare parts supply within 1-2 working days STANDARD accessories, included in the price: - 1 x 80-liter stainless steel bowl - 1 x mixing beater for 80-liter bowl - 1 x flat beater for 80-liter bowl - 1 x dough hook for 80-liter bowl OPTIONAL accessories, available at an extra cost, prices on request: - Additional 80-liter stainless steel bowl - Additional tools (mixing beater, flat beater, dough hook) - 60-liter attachment (1 x 60-liter stainless steel bowl + 3 tools for 60-liter bowl) - Bowl cart for 80 or 60-liter bowls Technical data: - Motor power: 4.5 kW Cjdehydmdepfx Aa Hsrc - RPM at 50Hz: 133 - 400 (level 1 - 10) - Fuse protection: 16A-CEE plug - Connection values: 400V - 3Ph - 50Hz - Dimensions: 720 x 1050 x 1660 mm (W x D x H) - Max. 1910 mm height when the hood is open - Net weight: 450 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Cjdjy Avnpjpfx Aa Herc Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: used, Year of construction: 2015, operating hours: 3,110 h, lifting height: 4,700 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-80 diesel forklift, year of manufacture: 2015, operating hours: 3,110 h, previous owner: German Armed Forces, nominal lifting capacity: 8,000 kg, lift height: 4,700 mm, duplex mast, hydraulic sideshift, fork positioner, full cabin, fork length: 2,400 mm, diesel engine [80 kW/109 hp], weight: 14,320 kg, in good condition, immediately available and ready for operation! On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further information is available on our website. Subject to prior sale and errors excepted. Codpey Ttf Tsfx Aa Horc Power steering, cabin = Further information = Lifting capacity: 8,000 kg Overall height: 280 cm Please contact Tobias Ebert for further information.