Used Mc-125 for sale (5,184)

Condition: excellent (used), Two Arno 125mm machine vices and a 125mm Helox vice - 800 euros each Bwedev Am Nfspfx Al Isl

Condition: used, Year of construction: 1978, pressure 125 t throat 340 mm stroke 20 - 160 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 480 mm table surface area 1000 x 660 mm table height over floor 730 mm ram surface 600 x 300 mm ram adjustment 75 mm power requirement 8,5 kW weight 7,8 t dimensions (WxDxH) 1,4 x 2,8 x 2,7 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, back gears, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, two-hand and foot operation Bwsdpsyx Iiwsfx Al Ijl

Condition: used, Year of construction: 1977, pressure 125 t Bwodpsylzw Hjfx Al Ijl distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm Bsdpfx Aljy Hnuco Iowl - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled • Spindle type: Electrospindle Bsdpfxjyv H Nkj Al Iewl • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30

Condition: not inspected (used), functionality: unexamined, overall weight: 50 kg, total height: 130 mm, jaw width: 125 mm, total length: 450 mm, total width: 200 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Jaw width: 125 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 450 x 200 x 130 mm Weight: 50 kg Bedpfx Aleyr Ippo Ijwl External reference: 49

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Bwjdsx Ituqspfx Al Ijl Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Bedpfjv U R Agsx Al Iswl Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: good (used), Year of construction: 1997, functionality: fully functional, STC-Ref:G-671-2397 Horizon MC-80a, Year: 1997 Format: 318x470 mm Ausstattung: - 1. tower Typ MC-80a , 8 stations - 2. tower Typ MC-80m defect (for slaughter) Bedpfjygmgpjx Al Ijwl

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 04/2027, year of last overhaul: 2022, total length: 1,800 mm, total width: 1,100 mm, total height: 1,550 mm, input current: 32 A, input frequency: 50 Hz, empty load weight: 2,000 kg, overall weight: 2,000 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral Mixer Gostol SM 125 A with bowl trolley TOP kneading machine for up to 200 kg dough Stainless steel bowl and spiral Cover with safety switch 2 timers and 2 speeds Very robust technology Bwodpfx Aoyaf Sdel Iel Connection: 400V, 32A-CEE plug Dimensions approx.: 1100 x 1800 x 1550/1950 mm (W x D x H) Used machine We have more spiral mixers in stock!

Condition: new, power: 15 kW (20.39 HP), fuel type: hybrid, color: other, Year of construction: 2025, operating hours: 11 h, General information Year of manufacture: 2025 Drivetrain Type of fuel: Hybrid (electric and diesel) Drive: Wheel Engine type: Yanmar 4TNV88 Measures and weights Empty weight: 10.710 kg Dimensions (LxBxH): 396 x 185 x 197 cm Functional Lifting capacity: 10.000 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Non marking tires - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final Bsdpow D R Umefx Al Iowl General Country of production: Italy Condition CE type: CE

Condition: used, functionality: fully functional, Year of construction: 1989, Jorns Norma Line Bwsdpfx Asy Drfajl Iel Working width: 6.00 m Bending capacity: 1.0 mm Year of manufacture: 1989 Display retrofitted

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm Bwsdpfx Alou Dl R Ue Isl - Centralised lubrication

Condition: new, total length: 3,200 mm, Year of construction: 2023, load capacity: 4,500 kg, - Tragfähigkeit 4500 kg - Eigengewicht: 4900 kg - Verwindungssteifes Gehäuse, gefertigt aus hochfestem Stahl - Vorderradantrieb Nr. 2 Elektromotoren AC 3 kW 48V. Isolationsklasse H - Fahrantrieb Elektromotor 6 kW 48 V AC - Hydraulikaggregat Elektromotor 9 kW 48 V AC - Batterie 48 V – 600 Ah - Fahrsteuerung Elektronische Geschwindigkeitskontrolle, Typ MOSFET - Lenkung und Antrieb über hintere Achse, Lenkwinkel 90°/90° - Superelastikreifen Nicht kreidend, Vorne: Nr.2 superelastich 23x10-12” Hinten: Nr.2 superelastich 18x7-8” Bwedpfx Asyxr Rxjl Ijl - Abnehmbare Kontergewichte 1360 kg - Proportional ausfahrbarer hydraulischer Ausleger - Vorderachse Antrieb mit gegenläufiger Bewegung - Funkfernbedienung für alle Kran- und Auslegebewegungen - Batterie: 48 V - 600 Ah, 8 Arbeitsstunden - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatten - Auslegerwinkel +60°/-15°

Condition: new, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 48 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 40 kVA, rotational speed (max.): 15,000 rpm, overall weight: 7,200 kg, Equipment: documentation/manual, The SIGMA MISSION SMV 1050 Vertical Machining Center is a new and robust machine suitable for a wide range of industrial applications. Equipped with a Heidenhain TNC 620 CNC control, it provides precise and user-friendly operation. Its table dimensions are 1,150 × 560 mm, allowing a maximum load of up to 800 kg/m². Bwodpfjxgqdqsx Al Iel The machine offers a wide range of movements, with travels of 1,050 mm on the X axis, 560 mm on the Y axis and 635 mm on the Z axis. This equipment requires an air pressure of 6 to 8 bar for proper operation. With a total weight of 7,200 kg, its solid construction ensures stability during machining processes. The operating power is 40 kVA, indicating a significant but appropriate energy consumption for its capacity and size. The SIGMA MISSION SMV 1050 is a reliable option for companies seeking efficiency and precision in vertical machining operations.

Condition: used, Year of construction: 2024, load capacity: 3,000 kg, lifting height: 4,760 mm, total length: 4,300 mm, · Hersteller Manitou · Modellname MC 30-4 ST5 · Antriebsart Diesel · Bedienertyp Sitzen · Max. Tragkraft 3000 kg · Lastschwerpunkt 500 mm · Lastabstand, Mitte der Antriebsachse bis zur Gabel 626 mm · Standard mast reference of the machine FVD 33 · Vorderachslast (beladen) / Hinterachslast (beladen) 6650 kg / 790 kg · Bereifung Pneumatisch · Reifengröße, vorn 12,5/80-18/12 SL R4 · Reifengröße, hinten 27x10-12 SKS · Anzahl der Vorderräder / Hinterräder 2 / 2 · Anzahl der Antriebsräder 4 · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm Bwodpfxeyxhk Ie Al Ijl · Sitzhöhe 1094 mm · Gabelträger DIN 15173 A/B 3A · Gang· breite für Palette 1000 x 1200 quer 5461 mm · Wenderadius 3435 mm · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit – beladen 46 % · Festellbremse Hydraulik bremst durch Druckverlust · Nennleistung Verbrennungsmotor 37 kW · Hersteller / Motor Modell / Motornorm Kubota / D1803 CRT E5B / Stage V · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ · Steuerung Elektronisch · Ölmenge für Anbaugerät 42 l/min · Geräuschpegel am Ohr des Fahrers gemäß DIN 12 053 79 dB

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Bjdpoy Dgrnofx Al Ijwl Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Year of construction: 1998, condition: not inspected (used), functionality: unexamined, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,200 mm, stack height: 1,000 mm, TECHNICAL DETAILS Max. panel length: 4,200 mm Max. panel width: 2,200 mm Max. stack height from floor: 1,000 mm Bsdpfsyzy Rxjx Al Iewl Lifting capacity: 200 kg Number of vacuum suction cups: 32 MACHINE DETAILS Number of pick-up stations: 2 EQUIPMENT Pick-up station for panel stacks Vacuum system Feeding of panel stacks Feeding of panel stacks via motorized roller conveyor Frame system Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') based on photographic documentation and technical/commercial data sheets of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 5934

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 12,500 mm, mast type: telescopic, Year of construction: 2023, operating hours: 283 h, General information Year of manufacture: 2023 Technical information Engine capacity: 3.000 cc Drive: Wheel Engine type: JCB 430 TA5-55 Empty weight: 10.020 kg Dimensions (LxBxH): 580 x 235 x 259 cm Functional Lifting capacity: 3.500 kg Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Pallet forks - Quick change Bwedpfx Alsyvdvte Isl = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final Condition CE type: CE Fork carriage, Support legs

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA CE mark: yes Bwedpfxow A E U Ss Al Ijl Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Transport dimensions (LxWxH): 2,25x1,35x2,25 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel - Tank

Condition: used, Vertical Machining Center FAMUP MC 70 Evolution – Year of manufacture: 2001 • CNC Control: SELCA S3045 • Axis Travels: X = 700 mm, Y = 480 mm, Z = 640 mm • Spindle: • Taper: ISO 40 • Speed range: 50 ÷ 10,000 rpm • Power: 18.5 kW (30 min) / 15 kW (continuous) • Tool Changer: • 24 to 30-position tool magazine • Bidirectional selection • Tool change time: 1.7 sec • Max tool: Ø75 mm, length 280 mm, weight 6 kg • Feed Rates: • Working feed: 10,000 mm/min Bsdjwdrdpjpfx Al Iswl • Rapid feed: 30,000 mm/min • Positioning accuracy: ±5 µm • Repeatability: ±1.5 µm • Table: • Size: 900 x 520 mm • 5 T-slots, 100 mm pitch, 18 mm width • Max load: 400 kg • Cooling System: • Tank capacity: 500 liters • Spindle cooling: 55 L/min at 10 bar • Tool cooling: 225 L/min • Part washing: 225 L/min • Base washing: 329 L/min • Dimensions & Requirements: • Max footprint: 3895 x 2220 x 2870 mm • Weight: 4800 kg • Compressed air: 6 bar • Noise level: 71.5 dB(A) • Note: Machine can be seen in operation upon request

Condition: reconditioned (used), Kemper paddle mixer Bjdpfx Aljyux Smo Ijwl - model F 125 ASL - used - capacity: 200 kg dough - 1 removable bowl - refurbished - good technical condition - collection from warehouse / shipping option available - price on request

Condition: good (used), Nowicki KN1-125 Bowl cutter Bedpfx Aljnp Nc Ij Iswl Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Bedpfx Asikfmhjl Iowl

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Bedpfx Aloxzq Ncs Ijwl Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!