Used Aes Nesting Machining Center for sale (70,672)

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Bdodpfxsyyqtue Al Uog Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min Bjdpfx Aspumdcjl Uodg tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, x-travel 760 mm y-travel 410 mm Bsdpfexxb I Djx Al Uedg z-travel 500 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Bdedpfjzwvqkex Al Uog Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: used, Year of construction: 2001, - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Used CNC machining center Manufacturer: IMA Type: BIMA P 480 V, 180/480 Year of manufacture: 2001 Bsdpfx Alszux Uao Uedg Alternative processing: - X = 2 x 2,400 - Y = 1,800 mm - Main spindle 12 kW - 18-position tool changer - Gluing unit with 6-position coil magazine Working area: For standard machines, Y = 1,800 mm Changing table area for alternating machining: X = 2 x 2,400 mm / Milling and drilling X = 2 x 2,100 mm / Gluing CNC line control IMATRONIC NT 231 Automatic adjustment table with clamping plates Main spindle 12 kW With integrated C-axis, 360 degrees Automatic tool/adapter unit changer, 18-position 1 edge banding unit VT100 With glue application device Edge thickness: 0.4 - 3 mm For 4-sided edge banding and all-round edge banding with butt joint 6-position roller magazine 1 trimming unit 0.8 kW Including adapter unit - Saw, fixed at 90 degrees - Horizontal milling unit (corner release) - Chamfer milling unit - Straight milling unit - Profile drawing blade Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Bsdpfxezux T Ne Al Ujdg Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Bdsdpfxszux Tps Al Uog Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license Bsdpfxszux Tie Al Uedg

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Bjdpfxjzux Tco Al Ujdg Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch Bdedpfxjzux Rbs Al Ujg 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) Bsdpfx Aozux Nwjl Uedg - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2005, CNC machining center Manufacturer: Homag Type: PROFI BOF 722/58/18/F/K Year of manufacture: 2005 Bdjdezux Imjpfx Al Usg Technical data - Machining area: X = 6000 mm / Y = 1800 mm / Z = 380 mm from the suction cup - 5-axis swivel head (replaced in 2019) - Rear spindle with Flex5 unit - 2 traversing tool changers with 18 positions each - Computer with Windows 10 (new 1.5 years ago) - Woodwop 8.1 - 2nd vacuum pump, can be switched on/off separately

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range Bdedszux Iaopfx Al Uog X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control Bdodpfozux H Aex Al Uog OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking Bodpfx Aszuxi Rel Uodg * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min Bdodpjzuxhtefx Al Ujg - Programmable speed in the Z-axis: 22.5 m/min - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm z-travel: 675 mm Bdjdpsqy Sr Sofx Al Usg A-Axis travel: -180 ... +45 ° b-axis: 360,000 ° spindle drive: 40 / 52 (100% / 40% ED) kW spindle turning speed range: 10000 U/min Tool bore: HSK-A63 numbers of tools in magazin: 40 total power requirement: 47 kW weight of the machine ca.: 13 t including additional tool magazine ZM 182 1 spindle , 5 axes *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Control system: Heidenhain iTNC530 Bedpezun Snjfx Al Ujdg Travel distances: X: 1,035 mm Y: 560 mm Z: 510 mm Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen

Condition: used, Year of construction: 2025, table length: 3,100 mm, table width: 2,100 mm, Technical data Bsdozuw Tzspfx Al Uedg - Table size: 3100 x 2100 mm - 4-axis main spindle - Linear tool changer, 16 positions - 2 vacuum pumps - 12 vertical drilling spindles - 1 dado blade

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm Bdodpfxezuw Rto Al Uog - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation Bdsdpfxozuw H Is Al Ujg - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction Bsdozuw E Rjpfx Al Uodg - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Bodpszuw Dtjfx Al Ujdg Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Bdodpfsvwbp Ajx Al Usg

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Bdjdovvi Htjpfx Al Usg Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld